Equipment ↠ Caterpillar ↠ Compact Track Loaders ↠ THIS Caterpillar 257D

Caterpillar 257D For Sale in LaVergne, TN

Name: Caterpillar 257D
Brand: Caterpillar
Price: 31250 USD
Availability: InStock

❮

❯

For Sale: $31,250.00 USD

Apply for Financing

Thompson Machinery

Thompson Machinery Dealer Info

Thompson Machinery Website

Click here to email Thompson Machinery.

Contact: Evan Ogrodowicz

Click for Phone Number

Machine Info:

Hours:	3298
Serial Number:	EZW02510
Machine Location:	LAVERGNE, TN
More Information:	https://catused.com/cu/10063750

Description:

2 SPEED CONTROL, 2 SPEED TRAVEL, AIR CONDITIONER, AM FM RADIO, ANTI-THEFT SYSTEM, AUXILIARY HYDRAULICS, BLUETOOTH, BUCKET, CE PLATE, COUPLER, HYDRAULIC, EROPS, HAND AND FOOT CONTROL, HEATER / DEFROSTER, HYDRAULICS, STANDARD FLOW, LIGHTING, Online Owner's Manual , PRODUCT LINK, RIDE CONTROL, SELF LEVELING, ULTRA LOW SULFUR DIESEL FUEL

Machine Details:

GENERAL APPEARANCE
Cleaning Required	Yes
S.O.S. Taken	No
SAFETY ITEMS
ROPS	Yes
Safety Decals In Place	Yes
Safety Decals Legible	Yes
GAUGES, OPERATOR STATION, CONSOLE
Back Up Alarm	Yes
Current O&MM	No
Current Parts Manual	No
Current Safety Manual	No
ROPS Certification Plate	Yes
ENGINE
Blow By	No
Compression in Radiator	No
EPA Decal	No
Fluid Levels OK?	No
Knocking	No
Oil Leaks	No
Water in Oil	No
COOLING SYSTEM
Leaks - COOLING SYSTEM	No
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block Heater	No
Ether Aid	No
TANDEMS/GEARS/BEARINGS/CHAINS
Front Torsion Bars	Good
Lines / Linkages	Good
Operating Condition	Good
Rear Torsion Bars	Good
Torsion Axles	Good
Travel Controls	Good
Travel Motors	Good
Travel Pumps	Good
HYDRAULICS
Leaks - HYDRAULICS	Yes
BUCKET
Leaks - HYDRAULICS	68 inch
Leaks - HYDRAULICS	The bucket carriage pins mounts have play in them
UNDERCARRIAGE
Leaks - HYDRAULICS	The right side track is missing the drive lugs, both back guide rollers are damaged. The right side second roller has play in it .
Leaks - HYDRAULICS	Left side 45% right side 100%
Leaks - HYDRAULICS	15 inch
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
Leaks - HYDRAULICS	The machine starts and runs. There’s a few hydraulic leaks and the tank is low, bucket sensor is broke, right track in missing the drive lugs, both back track guide rollers are damaged, AC isn’t working, inside and out side cab filters are missing,
Leaks - HYDRAULICS	back up camera is broke, cab door won’t latch properly and is scratched up, damage to the engine compartment door, some lights are out, the rubber on the joysticks are coming apart,

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Cab
FOPS	ISO 3449:2005 Level I
FOPS Level II	ISO 3449:2005 Level II
ROPS	ISO 3471:2008
Dimensions
Bucket Pin Height - Carry Position	8.5 in ( 22 cm )
Bucket Pin Height - Maximum Lift	10.2 ft ( 3 m )
Bucket Pin Reach - Maximum Lift	14.5 in ( 37 cm )
Clearance at Maximum Lift and Dump	90.5 in ( 230 cm )
Departure Angle	35 deg
Ground Clearance	0.8 ft ( 0 m )
Height - Top of Cab	7.0 ft ( 2 m )
Length - Track on Ground	59.0 in ( 150 cm )
Length - With Bucket on Ground	137.3 in ( 349 cm )
Length - Without Bucket	108.9 in ( 277 cm )
Maximum Dump Angle	52 deg
Maximum Overall Height	154.8 in ( 393 cm )
Maximum Reach - With Arms Parallel to Ground	52.5 in ( 133 cm )
Overall Length - Track	74.7 in ( 190 cm )
Rack Back Angle - Maximum Height	87 deg
Reach - Maximum Lift/Dump	25.1 in ( 64 cm )
Turning Radius from Center - Bucket	86.3 in ( 219 cm )
Turning Radius from Center - Coupler	55.1 in ( 140 cm )
Turning Radius from Center - Machine Rear	61.2 in ( 155 cm )
Vehicle Width	66.0 in ( 168 cm )
Engine
Bore	3.7 in ( 9 cm )
Displacement	203.0 cu in ( 3,327 cu cm )
Engine Model	Cat C3.3B DIT (turbo)
Gross Power - SAE J1995	74.3 hp ( 55 kw )
Net Power	73.2 hp ( 55 kw )
Net Power - ISO 9249	73.9 hp ( 55 kw )
Net Power - SAE 1349	73.2 hp ( 55 kw )
Peak Torque - 1,500 rpm - SAE J1995	195.0 ft ( 59 m )
Stroke	4.7 in ( 12 cm )
Hydraulic System
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)	58.0 hp ( 43 kw )
Hydraulic Flow - Standard - Hydraulic Power (Calculated)	39.0 hp ( 29 kw )
Hydraulic Flow - Standard - Loader Hydraulic Flow	20.0 gpm ( 76 lpm )
Hydraulic Flow - Standard - Loader Hydraulic Pressure	3,335.0 psi
Loader
Operating Load Rating	1,960.0 lbs ( 889 kg )
Operating Width	66.0 in ( 168 cm )
Noise Level
Inside Cab*	83 dB(A)
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3)	***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab**	103 dB(A)
Operating Specifications
Breakout Force - Tilt Cylinder	5,035.0 lbs ( 2,284 kg )
Ground Contact Area	1,770.0 cu in ( 29,005 cu cm )
Ground Pressure	4.5 psi
Rated Operating Capacities - 35% Tipping Load	1,960.0 lbs ( 889 kg )
Rated Operating Capacities - 50% Tipping Load	2,800.0 lbs ( 1,270 kg )
Rated Operating Capacity with Optional Counterweight	3,000.0 lbs ( 1,361 kg )
Tipping Load	5,600.0 lbs ( 2,540 kg )
Power Train
Travel Speed - Forward or Reverse - One Speed	6.3 mph ( 10 kph )
Service Refill Capacities
Cooling System	3.7 gal ( 14 l )
Engine Crankcase	3.0 gal ( 11 l )
Fuel Tank	27.7 gal ( 105 l )
Hydraulic System	13.2 gal ( 50 l )
Hydraulic Tank	10.3 gal ( 39 l )

Dealer Contact Info:

Thompson Machinery

Thompson Machinery Dealer Info

Thompson Machinery Website

Click here to email Thompson Machinery.

Fax: 615-793-7617

Contact: Evan Ogrodowicz

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon