List Your Equipment For Free  /  Seller Login
☰
Equipmentdown-arrow
  • Parts Search
  • Equipment Specs
  • Wanted to Buy
  • CEG Bargains
  • All Equipment List

  • Aerial Lifts
  • Aggregate Equipment
  • Agricultural Equipment
  • Air Compressors
  • Asphalt / Concrete / Paving
  • Asphalt Pavers
  • Attachments
  • Backhoe Loaders
  • Cold Planers / Milling Machines
  • Compact Track Loaders
  • Compaction Equipment
  • Conveyors / Feeders / Stackers
  • Cranes
  • Crawler Carriers
  • Crawler Dozers
  • Crawler Loaders
  • Crushers
  • Drills
  • Dumpers
  • Excavators
  • Forestry Equipment
  • Forklifts
  • Landscaping Equipment
  • Light Towers
  • Material Handlers
  • Mini Excavators
  • Miscellaneous Equipment
  • Motor Graders
  • Off-Highway Trucks
  • Off-Highway Water Trucks
  • On-Road Trucks
  • Pipelayers
  • Power Systems and Generation
  • Pumps
  • Scrapers
  • Screening
  • Skid Steer Loaders
  • Skip Loaders
  • Snow Equipment
  • Straw Blowers / Hydroseeders
  • Sweepers
  • Telehandlers
  • Trailers
  • Trenching / Boring / Cable Plows
  • Utility Vehicles
  • Welders
  • Wheel Dozers
  • Wheel Loaders
    • Newsdown-arrow
    Auctionsdown-arrow
    Companydown-arrow
    Subscribedown-arrow
    Parts
    Buyer's Guides
    Digital Issues
    Videos
    search-icon Search

    10 Things You Need to Know About Compressor Pressure

    Thu September 29, 2022 - National Edition
    Atlas Copco


    Applications, regulations, treatments — there's plenty to consider when understanding your pressure requirements.

    For more information on Atlas Copco Portable Air Division, visit www.atlascopco.com/en-uk/construction-equipment/products/mobile-air-compressors.

    Compressors must provide the right amount of pressure — or force — needed to complete the required process. Not too little, or too much. Too little pressure means pneumatic tools won’t work, whereas too much pressure can damage the equipment, waste energy and raise operating costs.
    Compressors must provide the right amount of pressure — or force — needed to complete the required process. Not too little, or too much. Too little pressure means pneumatic tools won’t work, whereas too much pressure can damage the equipment, waste energy and raise operating costs.  

    Every project is different, and not every application requires the same level of pressure. Geothermal projects, for example, require deep boreholes to be drilled into the earth, which can only be achieved by using compressors with a pressure output of 35 bar. Abrasive blasting projects, on the other hand, may only require 10 bar of pressure.
    Every project is different, and not every application requires the same level of pressure. Geothermal projects, for example, require deep boreholes to be drilled into the earth, which can only be achieved by using compressors with a pressure output of 35 bar. Abrasive blasting projects, on the other hand, may only require 10 bar of pressure.  

    Those requiring varied pressure levels for different aspects of a project can benefit from using a medium compressor fitted with PACE, or large compressor with Air Expert. With Atlas Copco's technologies, you can adjust pressure while the compressor automatically regulates flow. Operating handheld tools, then tackling a shotcrete application an hour later? No problem.
    Those requiring varied pressure levels for different aspects of a project can benefit from using a medium compressor fitted with PACE, or large compressor with Air Expert. With Atlas Copco's technologies, you can adjust pressure while the compressor automatically regulates flow. Operating handheld tools, then tackling a shotcrete application an hour later? No problem.  

    In the drilling industry, there is heightened consumer demand for compressors that prioritize speed and efficiency. This demand can be met using high pressure compressors, such as the DrillAir — especially designed to maximize efficiency by drilling faster than ever before, and helping to save valuable time and costs.
    In the drilling industry, there is heightened consumer demand for compressors that prioritize speed and efficiency. This demand can be met using high pressure compressors, such as the DrillAir — especially designed to maximize efficiency by drilling faster than ever before, and helping to save valuable time and costs.  

    For sufficient pressure, you need consistent flow. A large air compressor, for example, takes the hammer downwards by applying a downward pressure, while the flow keeps it rotating. For optimal performance, the goal should be to supply an application with the proper air flow at the correct pressure, and treat the pair as inextricably linked.
    For sufficient pressure, you need consistent flow. A large air compressor, for example, takes the hammer downwards by applying a downward pressure, while the flow keeps it rotating. For optimal performance, the goal should be to supply an application with the proper air flow at the correct pressure, and treat the pair as inextricably linked.  

    For projects that need pressure above 35 bar, boosters are available. Atlas Copco compressors come in oil-free or nitrogen variations, and can reach anywhere from 69 bar to a whopping 345. They have extensive pressure inlet / outlet, and flow capacity for a wide range of applications — even in the harshest and most demanding conditions.
    For projects that need pressure above 35 bar, boosters are available. Atlas Copco compressors come in oil-free or nitrogen variations, and can reach anywhere from 69 bar to a whopping 345. They have extensive pressure inlet / outlet, and flow capacity for a wide range of applications — even in the harshest and most demanding conditions.  

    Variable Speed Drive (VSD) compressors are a smart choice when demand for air varies, and allow for continuous flow rate regulation. VSD compressors can operate at very low delivery pressures while still maintaining the air system’s required minimum working pressure, and also deliver more consistent discharge pressure for all the compressed air applications throughout your facility.
    Variable Speed Drive (VSD) compressors are a smart choice when demand for air varies, and allow for continuous flow rate regulation. VSD compressors can operate at very low delivery pressures while still maintaining the air system’s required minimum working pressure, and also deliver more consistent discharge pressure for all the compressed air applications throughout your facility.  

    At Atlas Copco all new, updated, or repaired pressure containing systems are first put through a leak test, and then a strength test. The latter puts the compressor at 110 percent of the system's maximum operating capacity, where it is kept under pressure in order to monitor integrity and safety. All components are also manufactured in line with the strict industry standard of pressure regulation — the European Pressure Directive.
    At Atlas Copco all new, updated, or repaired pressure containing systems are first put through a leak test, and then a strength test. The latter puts the compressor at 110 percent of the system's maximum operating capacity, where it is kept under pressure in order to monitor integrity and safety. All components are also manufactured in line with the strict industry standard of pressure regulation — the European Pressure Directive.  

    A holistic approach is needed to maintain pressure quality, as different components can negatively affect performance. Filters, dryers and the compressor’s piping and valves all need to be considered and maintained appropriately in order to keep pressure working in tip-top shape.
    A holistic approach is needed to maintain pressure quality, as different components can negatively affect performance. Filters, dryers and the compressor’s piping and valves all need to be considered and maintained appropriately in order to keep pressure working in tip-top shape.  

    Ultimately, a systematic approach should be taken to select a compressor in line with the needs of the application. When the role of pressure in a process is clearly defined, finding the system that will be the most profitable and efficient becomes simple.
    Ultimately, a systematic approach should be taken to select a compressor in line with the needs of the application. When the role of pressure in a process is clearly defined, finding the system that will be the most profitable and efficient becomes simple.  




    Today's top stories

    Florida's Sarasota Bradenton International Airport Sees $105M Terminal Expansion

    Louisville Pump Station Receives $230M Update

    Rokbak Haul Track Telematics Boost Uptime With Proactive Maintenance

    SISO Air, InTerra Form Strategic Reseller Agreement

    Hitachi Construction Machinery Wins Silver in 2024 Anthem Award

    Balfour Beatty's Carolinas Operations Selected for Over $36M in Special Project Works

    Caterpillar to Spotlight 'Next 100 Years' at CES 2025

    Liebherr to Exhibit at World of Concrete 2025



     

    Read more about...

    Air Compressors Atlas Copco







    \\ \\ \\