One of Atlas Copco's latest additions to its generator lineup, the compact QAS 25, is equipped with an Isuzu 4LE engine and a diesel oxidation catalyst (DOC) to achieve Tier IV Final emission levels. The generator is ideal for heavy-duty use in several industries, including rental, oil and gas and construction. It also is an option for powering events. It can be used for prime or standby power and is designed to withstand the rigor of demanding use in the field.

Atlas Copco exhibited the QAS 25 during the 2014 POWER-GEN International tradeshow Dec. 8 to 11 in Orlando, Fla.

The QAS 25's overall durability as well as the quality and dependability of its interior components give it one of the highest resale values in the industry. For example, the QAS 25 is mounted on a durable frame and surrounded by a robust enclosure formed from galvanneal steel and powder coated for a long-lasting, scratch- and corrosion-resistant surface.

In terms of performance, the generator is equipped with a Leroy-Somer AREP alternator for optimal motor-starting capability. Deep Sea 4510 controls are comfortable, reliable and easy to use. The unit comes standard with two-wire remote start capability and features a 72-gal. fuel tank for a 45-hour run time, nearly twice the run time of some competitive models.

The unit's versatility can be seen but not heard. The QAS 25 enclosure is sound attenuated and has a vertical radiator and exhaust discharge to ensure low dBA levels for use on noise-sensitive job sites, residential areas or at events. Its voltage selector switch allows operators to adjust the machine's output to 480 and 208/240 volt 3-phase settings as well as 120/240 volt single phase for varying applications and equipment.

More Features

For additional safety, the locking front panel voltage adjust potentiometer prevents unintentional adjustments to the voltage, which can cause overheating or equipment damage. This versatility gives users greater flexibility on the job site and can increase utilization at rental centers. The 120vac GFCI duplex receptacles are always powered, giving users the ability to operate small hand tools while running larger loads, such as vendor stands or jobsite trailers.

Atlas Copco designed the QAS 25 for fast and easy maintenance with large doors and all maintenance points on one side of the machine. The DOC after-treatment device requires no regeneration or maintenance. The engine meets Tier IV Final emissions without the need for diesel exhaust fluid or a diesel particulate filter system. Further, engine fluids are plumbed to the edge of the skid to eliminate the hassle of maneuvering pans into the interior space. The standard spillage free base-frame safeguards the site and protects the environment. It's sized to contain 110 percent of all the machines fluids and fuel, giving users confidence in the most environmentally sensitive areas.

The QAS 25 comes equipped with an optional trailer with robust tie-downs for transport on a flatbed. Skid units contain fork pockets for forklift transfer. All units come with a standard single-point lifting eye in the enclosure for maneuvering with a crane.

For more information, visit www.atlascopco.com.

Today's top stories

Pacific Coast Highway Drainage Infrastructure, Bridge Construction Proceed

Explore St. Louis: Gateway to Experiences at World of Asphalt 2025

AUSA Unveils Its Next-Generation of Compact Dumpers

MassDOT Plans to Replace Cape Cod's Sagamore Bridge With Two, Three-Lane Spans

Caterpillar to Spotlight 'Next 100 Years' at CES 2025

HIPOWER HS Stationary Product Line

Appalachian State University in Boone, N.C., to Build $29M Indoor Athletic Practice Facility

Tennessee DOT Wants $308M in Funding to Deal With Backlog of Projects Amid Flat Revenues