Categories ↠ Compact Track Loaders ↠ Caterpillar 279C

Caterpillar 279C Compact Track Loader

Category: Compact Track Loaders ➔
Manufacturer: Caterpillar ➔
Model: 279C ➔

The Caterpillar 279C Compact Track Loader boasts a robust construction and powerful performance to handle a variety of tasks with ease. Equipped with a Cat C3.4T engine delivering 84 horsepower, this machine offers remarkable hydraulic power with a flow rate of 22 gpm and a maximum loader hydraulic pressure of 4061 psi. With an operating weight of 9892 lbs and a tipping load of 6483 lbs, the 279C combines strength and precision for efficient operation on any job site. Explore its impressive features and capabilities in the detailed specifications provided below.

See all Caterpillar 279Cs for sale

General Specifications

Cab

FOPS	SAE J1043 SEPT87 ISO 3449:1992 Level I
FOPS Level II	SAE J231 JAN81 ISO 3449:1992 Level II
ROPS	SAE J1040 MAY94 ISO 3471:1994

Dimensions

Bucket Pin Height - Carry Position	8 in (20 cm)
Bucket Pin Height - Maximum Lift	10 ft (3 m)
Clearance at Max Lift and Dump	8 ft (2 m)
Clearance at Maximum Lift and Dump	96 in (243 cm)
Departure Angle	44 degrees
Ground Clearance	9 in (23 cm)
Height - Top of Cab	7 ft (2 m)
Length - Track on Ground	70 in (177 cm)
Length - with Bucket	12 ft (4 m)
Length - With Bucket on Ground	145 in (368 cm)
Maximum Dump Angle	40 degrees
Maximum Overall Height	158 in (401 cm)
Maximum Reach - With Arms Parallel	55 in (139 cm)
Overall Length - Track	89 in (227 cm)
Rack Back Angle - Maximum Height	85 degrees
Reach at Max Lift and Dump	2 ft (1 m)
Reach at Maximum Lift/Dump	23 in (59 cm)
Turn Radius from Center - Bucket	91 in (231 cm)
Turn Radius from Center - Coupler	58 in (147 cm)
Turn Radius from Center - Rear	65 in (164 cm)
Turning Radius from Center - inc bucket	91 in (232 cm)
Turning Radius from Center - machine rear	65 in (164 cm)
Vehicle Width	78 in (198 cm)
Width Over Tracks	7 ft (2 m)

Engine

Aspiration	Turbocharged
Bore	3 in (9 cm)
Displacement	201 cu in (3,294 cu cm)
Engine Model	Cat C3.4T
Gross Power	84 hp (63 kw)
Gross Power - SAE J1995	84 hp (63 kw)
Net Power	82 hp (61 kw)
Net Power - SAE 1349	82 hp (61 kw)
Number of Cylinders	4
Power Measured @	2500 rpm
Stroke	5 in (12 cm)

Hydraulic System

Hydraulic Flow (1)	Standard
Hydraulic Flow (2)	High Flow XPS
Hydraulic Power	43 hp (32 kw)
Loader Hydraulic Flow	22 gpm (83 lpm)
Loader Hydraulic Pressure	3335 psi
Maximum Loader Hydraulic Flow	33 gpm (125 lpm)
Maximum Loader Hydraulic Pressure	4061 psi
Pump Flow	22 gpm (84 lpm)
Relief Valve Pressure	3335 psi

Loader

Breakout Force	7,308 lbs (3,315 kg)
Bucket Capacity	1 cu yd (0 cu m)
Operating Load	3,200 lbs (1,451 kg)
Tipping Angle	6483 degrees

Operating Specifications

Alternator Supplied Amperage	90 amps
Breakout Force - Tilt Cylinder	7,308 lbs (3,315 kg)
Cooling System Fluid Capacity	4 gal (14 l)
Engine Oil Capacity	3 gal (10 l)
Fuel Capacity	26 gal (98 l)
Ground Contact Area	2,504 cu in (41,033 cu cm)
Ground Pressure	4 psi
Hydraulic System Fluid Capacity	15 gal (57 l)
Max Speed - high range	9 mph (14 kph)
Max Speed - low range	5 mph (8 kph)
Operating Voltage	12 volts
Operating Weight	9,892 lbs (4,487 kg)
Rated Operating Capacities - 35% Tipping Load	2,240 lbs (1,016 kg)
Rated Operating Capacities - 50% Tipping Load	3,200 lbs (1,451 kg)
Rated Operating Capacity with Optional Counterweight	3,465 lbs (1,572 kg)
Tipping Load	6,483 lbs (2,941 kg)

Power Train

Travel Speed Forward	5 mph (8 kph)
Travel Speed Forward - 2-Speed	9 mph (14 kph)
Travel Speed Reverse	5 mph (8 kph)
Travel Speed Reverse - 2-Speed	9 mph (14 kph)

Service Refill Capacities

Cooling System	4 gal (14 l)
Engine Crankcase	3 gal (10 l)
Fuel Tank	26 gal (98 l)
Hydraulic System	15 gal (57 l)
Hydraulic Tank	11 gal (42 l)

Undercarriage

Ground Contact Area	2,504 cu in (41,033 cu cm)
Ground Pressure	4 psi
Length of Track on Ground	6 ft (2 m)

Weights

Operating Weight

9,892 lbs (4,487 kg)

Caterpillar 279Cs currently for sale

A 2014 Caterpillar 279C From Chinook Equipment for $39,250.00 USD

A Caterpillar 279C From Fabick Cat for $22,900.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon