Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
ENGINE POWER HP (KW) | 73 (54) Starting 2020 Model Year |
OPERATING LOAD LBS. (KG) | 2,700 (1,225) Starting 2016 Model Year |
OPERATING WIDTH IN. (CM) | 66 (168) Starting 2020 Model Year |
RATED OPERATING CAPACITY LBS. (KG) (50%) | 2,700 (1,225) Starting 2020 Model Year |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. |
FOPS | ISO 3449:2005 Level I |
FOPS Level II | ISO 3449:2005 Level II |
ROPS | ISO 3471:2008 |
Bucket Pin Height - Carry Position | 8 in (20 cm) |
Bucket Pin Height - Maximum Lift | 11 ft (3 m) |
Bucket Pin Reach - Maximum Lift | 16 in (39 cm) |
Bumper Overhang - Rear Axle | 43 in (108 cm) |
Clearance at Max Lift and Dump | 8 ft (2 m) |
Clearance at Maximum Lift and Dump | 94 in (238 cm) |
Departure Angle | 26 degrees |
Ground Clearance | 9 in (23 cm) |
Height - Top of Cab | 7 ft (2 m) |
Hinge pin height - fully raised | 125 in (317 cm) |
Length - With Bucket on Ground | 146 in (371 cm) |
Length - Without Bucket | 118 in (299 cm) |
Length w/o Bucket | 10 ft (3 m) |
Length with Bucket | 12 ft (4 m) |
Maximum Dump Angle | 51 degrees |
Maximum Overall Height | 158 in (401 cm) |
Maximum Reach - With Arms Parallel | 51 in (129 cm) |
Rack Back Angle - Maximum Height | 84 degrees |
Reach - Maximum Lift/Dump | 31 in (78 cm) |
Reach at Max Lift and Dump | 31 in (79 cm) |
Turn Radius from Center - Bucket | 86 in (218 cm) |
Turn Radius from Center - Coupler | 55 in (140 cm) |
Turn Radius from Center - Rear | 71 in (181 cm) |
Turning Radius from Center - inc bucket | 86 in (218 cm) |
Turning Radius from Center - machine rear | 71 in (181 cm) |
Vehicle Width over Tires | 66 in (168 cm) |
Wheel Base | 4 ft (1 m) |
Wheelbase | 4 ft (1 m) |
Bore | 4 in (9 cm) |
Displacement | 203 cu in (3,327 cu cm) |
Engine Model | Cat C3.3B DIT (Turbo) |
Gross Power - SAE J1995 | 74 hp (55 kw) |
Max Torque | 196 lbs ft (265 nm) |
Net Flywheel Power | 73 hp (54 kw) |
Net Power - ISO 9249 EEC | 74 hp (55 kw) |
Net Power - SAE 1349 | 73 hp (54 kw) |
Stroke | 5 in (12 cm) |
Torque Measured @ | 1500 rpm |
Hydraulic Flow (1) | Standard |
Hydraulic Flow (2) | High Flow XPS |
Pump Flow Capacity | 32 gpm (121 lpm) |
Operating Load Rating | 2,700 lbs (1,225 kg) |
Operating Width | 66 in (168 cm) |
Alternator Supplied Amperage | 80 amps |
Breakout Force - Tilt Cylinder | 7,355 lbs (3,336 kg) |
Chain Box Fluid Capacity - each side | 3 gal (13 l) |
Cooling System Fluid Capacity | 4 gal (14 l) |
Fuel Capacity | 25 gal (94 l) |
Hydraulic System Fluid Capacity | 14 gal (52 l) |
Max Speed | 8 mph (12 kph) |
Operating Voltage | 12 volts |
Operational Weight | 8,012 lbs (3,634 kg) |
Rated Operating Capacity | 2,700 lbs (1,225 kg) |
Rated Operating Capacity with Optional Counterweight | 2,950 lbs (1,338 kg) |
Tipping Load | 5,400 lbs (2,449 kg) |
Tire Size | 12 × 16.5 |
Travel Speed Forward | 8 mph (12 kph) |
Travel Speed Forward - 2-Speed Option | 11 mph (18 kph) |
Travel Speed Reverse | 8 mph (12 kph) |
Travel Speed Reverse - 2-Speed Option | 11 mph (18 kph) |
Chain Box - Each Side | 3 gal (12 l) |
Cooling System | 4 gal (14 l) |
Engine Crankcase | 3 gal (11 l) |
Fuel Tank | 25 gal (94 l) |
Hydraulic System | 14 gal (52 l) |
Hydraulic Tank | 10 gal (39 l) |
Operating Weight | 8,011 lbs (3,634 kg) |