E-Z Drill’s Equipment-Mounted Drills Offer Solution for Full-Depth Concrete Repair Projects

The units are capable of drilling 5/8- to 2 ½-in (1.6 to 6.3 cm) diameter holes, at a depth of 18 in. (45.7 cm).

Mon June 02, 2014 - National Edition
Construction Equipment Guide

E-Z Drill’s Model 210 equipment-mounted concrete drill attachment series consists of three models: the three-gang Model 210-3 EQ MT, four-gang Model 210-4 EQ MT and five-gang Model 210-5 EQ MT, and is compatible with most model of backhoes and excavators.

The units are capable of drilling 5/8- to 2 ½-in (1.6 to 6.3 cm) diameter holes, at a depth of 18 in. (45.7 cm). Each individual drill motor requires a minimum of 100 cfm (2.8 cu m/min) for operation, with a minimum of 300 cfm (8.4 cu m/min) required to power the smallest unit in the series, the Model 210-3 EQ MT.

For more information, call 800/272-0121 or visit www.ezdrill.com.

Today's top stories

Louisville Pump Station Receives $230M Update

Amtrak Secures $112M in Federal Funds to Upgrade 13 Projects in Northeast Corridor

Hitachi Construction Machinery Wins Silver in 2024 Anthem Award

Turner Construction Leads $675M Concourse Project

Bobcat Celebrates Season of Giving With Volunteerism, Hurricane Relief, Philanthropic Support

MassDOT Plans to Replace Cape Cod's Sagamore Bridge With Two, Three-Lane Spans

HIPOWER Unveils T4F Mobile Power Models

Illinois DOT Celebrates Completion of I-55 Interchange Near Joliet, Shorewood

Read more about...

Asphalt / Concrete / Paving Attachments Drills E-Z Drill New Products

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon

\\ \\ \\