List Your Equipment For Free  /  Seller Login

Felling Trailers' Self-Loading Turret Reel Trailer is a Valuable Tool for Any Fleet

Tue October 01, 2019 - National Edition
Felling Trailers


With a 360-degree hydraulically operated rotating turret assembly, the FT-14-2 R turret can lock into any position when the directional control valve is released.
With a 360-degree hydraulically operated rotating turret assembly, the FT-14-2 R turret can lock into any position when the directional control valve is released.

Felling Trailers Inc.'s self-loading turret reel trailer is a valuable tool for any fleet. With a 360-degree hydraulically operated rotating turret assembly, the FT-14-2 R turret can lock into any position when the directional control valve is released. Keeping mindful of equipment, time and operator safety the turret's self-loading feature eliminates the need to have extra equipment and operators on-site to lift and load the reel as on a fixed reel trailer.

The hydraulic payout/take-up assembly is a sealed gear driven unit. Keeping repair work to a minimum, there are no chains or sprockets to break orwear out. The drive unit is exceptionally smooth and quiet to operate, easily engages and disengages from the reel bar, according to the manufacturer. Not only does it payout and retrieve, but it also has optional hydraulic braking capabilities. Hydraulic brake tensioning eliminates the heat generated by traditional caliper and rotor. This reduces line gallop and allows for a longer tensioning duration. The generated heat is absorbed in the hydraulic oil and dissipated by the oil cooler.

The hydraulic tensioning feature can be used in overhead conductor installation and replacement. For those in the Oil & Gas industries, this feature can be used for servicing existing wells, new deployment of ESP cable, retrieval and redeployment of ESP cable for the replacement or repair of the submersible pumps as well as deployment and retrieval for capillary tube operations.

This unit comes standard with an onboard hydraulic power supply. Felling uses a Honda GX 390 gas engine with electric start and recoil backup. The power pack is equipped with a 25-gallon hydraulic reservoir with a hydraulic oil return filter and a lockable theft-resistant enclosure. The FT-14-2 R Turret is rated for 2,250-psi continuous and 2,900-psi max and provides 8 gpm.

For more information, call 800/245-2809 or visit www.felling.com.

This story also appears on Truck and Trailer Guide.




Today's top stories

Pacific Coast Highway Drainage Infrastructure, Bridge Construction Proceed

Explore St. Louis: Gateway to Experiences at World of Asphalt 2025

AUSA Unveils Its Next-Generation of Compact Dumpers

MassDOT Plans to Replace Cape Cod's Sagamore Bridge With Two, Three-Lane Spans

Caterpillar to Spotlight 'Next 100 Years' at CES 2025

Werk-Brau to Host 2nd Annual Women In Construction Event

SpaceFactory to Build HQ in Huntsville; State Grant Boosts Etowah County's NEAR Megasite

HIPOWER HS Stationary Product Line


 







\\ \\ \\ \\