Haulotte Group has more than 120 years of experience and a single objective: to satisfy customers.
Haulotte Group has more than 120 years of experience and a single objective: to satisfy customers by offering technically innovative equipment for improved safety, comfort, ergonomics, and productivity. To achieve this, Haulotte Group is investing in production equipment, ensuring the longterm development of its commercial network and increasing R&D in order to better meet market expectations.
Haulotte will introduce the telescopic boom HT67 RTJ (HT23 RTJ) to the North American market, at ConExpo-Con/AGG.
The HT67 RTJ (HT23 RTJ) has a platform working height of 67 ft. 5 in. (20.5 m) and a horizontal outreach of 60 ft. 5 in. (18.3 m), approximately 3 ft. (9 m) greater than industry standards. Optional dual load capacity offers lifting capacity of up to 1,000 lbs. (450 kg)
The boom takes just 56 seconds to reach full height, increasing productivity two fold in this product segment.
Also displayed on Haulotte Group stand:
• Articulating big boom: HA130 JRT (HA41 PX-NT)
Among the big booms range, the articulating boom, HA130 JRT has compact chassis, tight turning radius and short wheelbase. It has a maximum outreach of 65 ft. 4 in. (19.80 m) and up to three simultaneous and proportional movements with non restricted working area.
• Articulating boom: HA51 JRT (HA41 PX-NT)
Both in working and stowed positions, the HA51 JRT is very compact and allows for easier access to congested areas. Continuous 360 degree turntable rotation, zero tailswing, fly jib motion and 180 degree platform rotation offer higher maneuverability whatever the working environment. Simultaneous four wheels drive and steer, a 16 in. (40.6 cm) ground clearance and a hydraulic differential lock system give enhanced all-terrain performance with gradeability up to 50 percent. This driveability allows easy access for demanding rough terrain conditions and working areas, according to the manufacturer.
• Diesel scissor Compact 2668 RT (C12DX)
Compact design, allied with fully proportional controls, makes the Compact 2668 RT particularly maneuverable. A very tight turning radius, 11 ft. 6in. (3.5 m) means that C2668RT can reach the most congested areas with ease. Drive speed 3.4 mph (5.5 kmh) and the ability to drive in the raised position offers considerable savings in working time.
• Electric scissors: Optimum 1930 E (Optimum 8) & Compact 3947 E (Compact 14)
The Optimum 1930 E is designed for all use in the industrial environment: extremely compact 6 ft. 7 in. (2 m) when stowed and a width of 2 ft. 3 in. (0.7 m), high autonomy, a ground clearance of 4 in. (8 cm) allowing easier maneuverability outside or inside buildings.
The Compact 3947 E is a lightweight and compact 40 ft. (14 m) electric scissors. With a width of 3 ft. 11 in. (1.2 m) and folding handrails, the C 3947 E is very compact. Due to the light weight — only 7,001 lbs. (3175 kg), fuel consumption is reduced during the operations of transport.
• Electric vertical mast: Star 26J (Star 10)
The vertical mast Star 26J was designed to meet a 32 ft. 3 in. (10 m) working height requirement in confined indoor areas: extreme compactness (a stowed height of 6 ft. 6 in. (1.99 m) and a width of 3 ft. 3 in. (1 m), a 360 degree rotation (with zero tail swing), outstanding access (positive / negative fly jib with +70 degree/-70 degree movement), precise handling and high autonomy.
• The articulating boom HA 32 CJ+ (HA 12 CJ+)
Stowed height 6 ft. 6 in. (1.99 m); the compact stowed height of HA32 CJ+ means it can pass through standard doorways and offer accessibility in the tightest spaces. With a width of 3 ft. 11 in. (1.2 m) and a tight turning radius, HA32 CJ+ is able to carry out three simultaneous movements: drive and steer plus either rotate the turret, move the jib or rotate the platform (or rotate the jib on the HA32 CJ+)
The HA32 CJ+ has a horizontal rotating jib (+90/-90 degrees) which offers additional flexibility to reach all working areas.
• Light weight self-propelled boom
The 55XA fits in well with the previously launched Light-Weight machines: With 45 percent gradeability, 4.5 mph drive speed, a four-wheel drive capability, this articulating, self-propelled boom lift offers: 500 lbs. of lift capacity, 61 ft. 3 in. (18.6 m) of working height, and 33 ft. 5 in. (10 m) of maximum outreach.
• Most popular model of trailer-mounted boom lifts
The 4527A trailer-mounted lift offers 51 ft. 8 in. (15.7 m) of maximum working height and 26 ft. 11 in. (8.2 m) of maximum outreach with an up-and-over height of 20 ft. 9 in. (6.3 m). The automatic, self-leveling hydraulic outrigger system, that is standard on all Haulotte trailer-mounted lifts, allows setup and operation in less than 30 seconds when all four outriggers are deployed simultaneously.
For more information, visit www.haulotte-usa.com.
Today's top stories
