Wirtgen News, Videos, and Information

Wed September 21, 2016

Honnen Equipment Elects Jon Asbury Vice President

With 18 years total heavy equipment industry experience, Honnen Equipment is pleased to announce that Jon Asbury was elected Vice President at a recent Shareholder's meeting. Jon oversees all sales operations for the Used, Wirtgen and Manitowoc divisions....

Mon September 28, 2015

Vögele MT 3000-2i Offers Increased Performance

The newly designed MT 3000-2i material transfer vehicle from Vögele offers increased performance in material transfer vehicles for asphalt paving. This machine is designed with the contractor in mind for enhanced productivity, low operating costs and maneuverability, according to the manufacturer....

Wirtgen - Wed March 11, 2015

Wirtgen TCM 1800 Texture Curing Machine Offers High Productivity

The TCM 1800 texture curing machine from Wirtgen America offers high productivity curing and texturing of portland cement concrete slabs. This self-propelled, track-mounted texture curing machine follows behind the slipform paver when placing concrete slabs, and is equipped with an automatic brooming and spraying system which adds pavement texture, and then a thin film of curing compound....

Kleemann - Tue February 24, 2015

The Mobirex MR 110 ZSi EVO 2 Builds on Proven Sucess

Kleemann's MR 110 ZSi EVO 2 impact crusher is the slightly smaller version of the MR 130 ZSi EVO 2. EVO 2 represents the continuing evolution of the successful EVO Contractor Line, with additional benefits in terms of economy and operational safety....

Wirtgen - Tue February 24, 2015

Wirtgen SP 90i Paver Series Permits Paving up to 30 ft. Wide

The Wirtgen SP 90i series of large slipform pavers — which permits paving from 6 to 30 ft. (1.8 to 9 m) — includes the two-track SP 92i, and the four-track SP 94i. The "i" in SP 90i designates these pavers as having "intelligent" power and emissions control systems, and both the SP 92i and SP 94i are Tier IV final emissions compliant....

Wirtgen - Tue February 24, 2015

Wirtgen SP 15i Offers a Great Variety of Setup Options

Wirtgen's SP 15i concrete slipform paver updates the existing SP 15 with Tier IV interim emissions technology, but both are true multipurpose machines that lay curb and gutter, barrier, sidewalk, V-ditch, special applications and slabs....

Mon November 03, 2014

W 250i Is Wirtgen’s Most Powerful Cold Mill

Wirtgen’s Tier IV interim-compliant W 250i offers high rates of productivity, maximum cost efficiency and fuel-efficient i-machine technology. This large cold mill can remove asphalt layers with a milling depth of up to 14 in....

Fri October 31, 2014

Full H i-series Line Available

Hamm’s “earthshaking” full line of technically advanced, Tier IV-interim emissions compliant H i-series of soil compactors is making waves in North America. Since its introduction, the 43,383-lb....

Mon August 25, 2014

Generation X Cutting Tools

Wirtgen America’s Generation X point-attack cutting tools are enhancing the performance and cost-efficiency of cold milling machines, resulting in higher productivity and better performance in the cut....

Mon August 25, 2014

Improved Rumble Strip Cutter Boasts Tier IV Interim Emissions Controls

Wirtgen America’s new high-performance rumble strip cutter, the W 50 DCi rumbler, is a standard W 50 DCi cold milling machine with an optional rumbler attachment installed, providing high-production, high-profitability cutting of milled rumble strips in the standard, preferred 16-in....