Keestrack long life grease is available in 400 ml tube and can be applied by the ergonomic handpump which you can operate single handed.

To increase uptime, Keestrack decided to standardize the long life grease on the K3, K4 and K5 scalper in its Czech factory as of the start of September, due to great testing results since 2021.

Keestrack long life (LLG) grease contains anti-wear and anti-friction additives and is resistant to water and rust. It extends service intervals and lowers costs and downtime. It expands the lifetime of the bearings of the screen box and apron feeder by running at lower temperature.

The LLG grease is resistant to high impact loads and vibrations and can handle an ambient temperature from -13 F to 293 F.

Service Interval

Due to the LLG grease, the service interval is 5 to 10 times longer, compared to standard EP2 grease, the manufacturer said. For example: greasing the screen box has been reduced from every 50 hours to every 500 hours.

Operating Temperature

The operating temperature of the bearings are much lower with LLG grease compared to standard EP2 grease. In one test, comparing the EP2 grease versus the LLG grease on the screen box of a K5, the bearings were running at an operating temperature up to 140 F with standard EP2 grease, while with LLG grease they were running at an operational temperature of 109.4 F, a significant difference.

The use of LLG grease has a huge positive effect on the lifespan of the bearings, resulting in more uptime, less downtime and less costs.

Private Label

To emphasize the unique characteristics of this grease, the cartridges are branded under Keestrack private label.

The LLG grease is available in 400 ml tubes and can be easily applied by an ergonomic handpump. The cartridges are made with a screwable cap so they cannot be mixed up with other classic grease pumps. You can apply the grease by the handpump single handed or both handed. The handpump is designed so you can always clearly identify the LLG grease. At the bottom it will stay clearly visible at all times.

Launch

Keestrack dealers inform their customers on this new standard on the K3, K4 and K5 screen, incorporated in its factories in Czech Republic as of Sept. 1. Due to standardizing the LLG grease, the central greasing option on the K3, K4 and K5 will disappear, as this does not make sense anymore, as only 6 bearings have to be greased every 500 hours. The greasing nipples are well indicated by the green labels on the machine with clear instructions.

For more information, visit www.keestrack.com.

This story also appears on Aggregate Equipment Guide.

Today's top stories

Construction Industry Optimistically Preparing for New Year Ahead

CFX Oversees $412M SR429 Expansion in Florida

Capital Express Central Project Ramps Up in Texas

VIDEO: NCDOT Plans Major Road Upgrades in Wilmington Over Next Several Years

DEVELON Set to Exhibit at ARA Show 2025

Des Moines Airport Works With Weitz/Turner On Expansion

Ring Power Lift Trucks Partners With Hiab to Bring MOFFETT Truck-Mounted Forklifts to Florida Customers

Earthborne Demo Day Draws Crowd Despite Downpour