Loose-N-It’s specially blended formula provides users a 4-in-1 solution for service-related needs. Specifically, its penetrates old bolts and screws, lubricates, displaces moisture, and resists corrosion. It also inhibits rust and corrosion by adding a protective layer that creates a barrier to protect against water and oxygen infiltration, while at the same time, displaces water from electrical contact points and machinery parts.

The Lube-A-Boom team has introduced its newest product, Loose-N-It. After speaking with several industry leaders, a lubrication niche not being adequately satisfied was identified; a product that allows technicians and parts managers to quickly remove old, stripped and/or rusty bolts from equipment. The Lube-A-Boom team found that many times these crucial bolts and screws had become so worn and stripped that removing them was a time-consuming process.

To alleviate this service-related pressure point, Lube-A-Boom set to work to develop a product that could easily be used in the field to assist in the removal of old and worn bolts. Thus, the Loose-N-It product came to fruition.

Loose-N-It is a 4-in-1 industrial lubricant and penetrant containing PTFE. With safety a top priority, parts managers will tell you that inspecting bolts and screws on equipment is important, and it is equally important to keep these bolts and screws lubricated and replaced when they become worn. Loose-N-It is the perfect product to satisfy those needs.

Loose-N-It's specially blended formula provides users a 4-in-1 solution for service-related needs. Specifically, Loose-N-It penetrates old bolts and screws, lubricates, displaces moisture, and resists corrosion. Loose-N-It inhibits rust and corrosion by adding a protective layer that creates a barrier to protect against water and oxygen infiltration, while at the same time, displaces water from electrical contact points and machinery parts.

Loose-N-It provides important safety properties for crane and equipment users. It is critical to inspect the bolts holding pieces of equipment together, such as the bolts holding together tower crane joints. These pieces generally consist of a bolt, nut, and washer which need to be protected from the elements and replaced if worn and corroded. Loose-N-It will provide inspectors the ability to extend the life of these critical pieces by keeping them rust free and helps inspectors remove these pieces when they inevitably become worn and need to be replaced. Safety is critical, and Loose-N-It is another tool in your arsenal to help keep equipment running longer and safer.

Loose-N-It can be used on a wide variety of equipment and can serve a variety of industries including, but not limited to, construction, mechanical and factory, truck lines, delivery services, transit systems and machine shops. Loose-N-It is made in the USA and conforms to Military Specifications MIL-C-23411 for corrosion prevention.

Loose-N-It will be the first product in the Lube-A-Boom Toolbox Series. The Toolbox Series features specially packaged products in 5 oz. cans rather than larger cans for smaller jobs or for contractors on the go.

For more information, visit lubeaboom.com.

Today's top stories

Florida's Sarasota Bradenton International Airport Sees $105M Terminal Expansion

Louisville Pump Station Receives $230M Update

Rokbak Haul Track Telematics Boost Uptime With Proactive Maintenance

SISO Air, InTerra Form Strategic Reseller Agreement

Hitachi Construction Machinery Wins Silver in 2024 Anthem Award

Balfour Beatty's Carolinas Operations Selected for Over $36M in Special Project Works

Caterpillar to Spotlight 'Next 100 Years' at CES 2025

Liebherr to Exhibit at World of Concrete 2025