Mack Trucks introduced Mack Load Logic and a 6x2 liftable pusher axle option for the Mack Pinnacle highway model.
Further extending its commitment to application excellence, Mack Trucks introduced Mack Load Logic and a 6x2 liftable pusher axle option for the Mack Pinnacle highway model, bringing fuel efficiency and productivity improvements to bulk and liquid haul applications.
Designed for applications that routinely haul out heavy and return empty, Mack Load Logic and the 6x2 with liftable pusher axle are designed to monitor trailer weight and adjust the truck’s driveline configuration to boost fuel efficiency without impacting performance.
“Mack Load Logic and the 6x2 with liftable pusher axle are great examples of Mack’s focus on application excellence,” said Stephen Roy, president of Mack Trucks North America. “Our customers told us they needed a ’no-compromises’ solution that reduces their total cost of ownership through improved fuel efficiency and enhanced productivity. We’re delivering both with these two new options, while still maintaining the same performance Mack customers have come to expect from a Mack truck.”
Load Logic integrates an advanced sensor in the rear suspension with the Mack mDRIVE automated manual transmission. When a fully loaded trailer is detected, mDRIVE operates as a direct drive transmission, locking out 12th gear for increased performance and pulling power. When an empty trailer is detected, the transmission switches to overdrive, enabling 12th gear to lower cruise RPMs and maximize fuel efficiency.
Load Logic is available exclusively with Mack’s efficiency-focused Super Econodyne system. In this combination, Load Logic delivers up to an additional 2 percent improvement in fuel efficiency when compared to a standard engine rating.
Similarly, the 6x2 with liftable pusher axle also is capable of determining payload by using sensors in the rear suspension and either lifting or lowering the foremost rear axle. When an empty load is detected, the axle lifts, allowing the tractor to operate as a 4x2 for less drag, better fuel efficiency and reduced tire wear, which helps lower maintenance costs. For full loads, the same axle is lowered to provide additional stability and distribution of the trailer’s weight on the fifth wheel.
To deliver optimal traction, the system’s suspension pressure and ride height are continuously monitored and adjusted to maintain a load bias toward the drive axle. In addition, three driver-selectable traction control modes are available via a dash-mounted switch:
• Enhanced Traction (ET) — Enhances low-speed traction for improved starts, docking and slippery road conditions.
• Optimized Traction (OT) — The default setting, optimized traction maximizes load to the drive axle. If wheel slip is detected, the system can temporarily increase load to the drive axle for 30 seconds to provide improved traction.
• Basic Traction (BT) — Lowers the lift axle regardless of suspension load and maintains a 50/50 load split between the lift axle and drive axle during loading or unloading, prolonged stops or areas that require 50/50 load splits between tandem axles.
During normal operation, control of the lift axle is automatic based on payload. The system offers a manual control feature that enables a driver to raise or lower the suspension for easier landing gear retraction or trailer hook-up respectively.
“The Mack Pinnacle model is already an ideal workhorse for weight and fuel-conscious customers,” said Roy Horton, Mack director of product marking. “With these new solutions, customers no longer need to choose between better efficiency and better productivity. Load Logic combines the performance of direct and overdrive transmissions into one, and our 6x2 with liftable pusher axle enhances traction, ride and handling characteristics, while still delivering increased productivity.”
In addition to Load Logic and the 6x2 with liftable pusher axle, the Pinnacle model offers other lightweight and fuel-saving options to benefit customers with regional, bulk and tanker haul and diminishing load applications. The Pinnacle model can be spec’d with the Mack MP7, a lightweight yet powerful 11-L engine that weighs about 400 lbs. less than a typical 13-L engine. For even greater fuel savings, the MP7 is available with the Mack Super Econodyne system that reduces engine cruise RPMs to boost fuel efficiency by up to 4 percent.
For more information, visit www.macktrucks.com.
Today's top stories
