Featuring Venturi-style suction and manual or automatic purge control, the pneumatic dust collector removes dust from the air as the operator drills.

The Minnich Manufacturing dust collection system meets the requirements for dowel pin drills found in Table 1 of the Occupational Safety and Health Administration (OSHA) final respirable crystalline silica standard when used with an appropriate filter. Filters supplied with the Minnich dust collection system comply with the OSHA filter efficiency requirement.

Featuring Venturi-style suction and manual or automatic purge control, the pneumatic dust collector removes dust from the air as the operator drills. The canister-style unit can be retrofitted to any Minnich on-grade, on-slab, machine-mounted or utility drill model. It also can be adapted to fit other dowel pin drill makes and models.

The dust collection system requires 40 scfm for hydraulically powered drills and 50 scfm for pneumatically powered units, and 60 to 110 psi. Each canister can accommodate up to two drills and offers a 60-square-meter filter area. The system comes with drill rod guide collection boots, a 5-gallon pail-type hopper and up to 20 ft. of vacuum hose per drill.

For more information, visit www.minnich-mfg.com.

Today's top stories

Crews Orchestrate $41.3M Randy Owen Center for Performing Arts Project

January's Mental Wellness Month: Supporting Mental Health in Construction

How Machine Technology Supports Productivity, Safety

NAPA Ends 2024 On High Note

Texas A&M Board Approves More Than $500M for Construction

$33.2M Grant Announced for First Wildlife Crossing Over I-5

Largest Solar Power Facility in U.S. Gets OK in Oregon

VIDEO: Raleigh, N.C., to Try Again at Finding Contractor to Build Its First Bus Rapid Transit Line