An Italian crane rental and transport company deployed its Grove cranes in tandem to repair a local church after it was struck by lightning.

Italian crane rental and transport company Santoni Autogrù called on two of its high-performing all-terrain cranes to help repair a local church: a Grove GMK4100L-2 and Grove GMK4100L-1.

Located in Pinzolo, Italy, the San Lorenzo church's 100 kg cross was struck by lightning and detached from the building's bell tower last year. The bell tower, built between 1865 and 1867, reaches 236 ft., and is the tallest bell tower in the Trentino-Alto Adige region.

The two Grove cranes worked in tandem to repair and replace the fallen cross — all in just a single day, despite major space limitations.

"We had to position our cranes very close to the bell tower and extend their reach to 75 m to replace the cross," said Giacomo Santoni, manager at Santoni Autogrù. "There was minimal room for the cranes to operate in the square, so they were forced into a tight space. But we still managed to complete the job in less than 24 hours."

Santoni Autogrù acquired its GMK4100L-2 in February this year and has been operating its GMK4100L-1 since purchasing it in 2018. Santoni said the company and its operators are highly satisfied with the Grove cranes.

"We are very impressed with our Grove cranes. They operate efficiently and are very easy to set up. We've reached the peaks of ski slopes and ski lifts several times with our beloved GMK4100L-1, always without any problems. Our crane operators also praise our Grove cranes because they have cabs that can be tilted to 20 degrees for peak visibility and their comfort levels are unmatched. Comfort is especially important for operators when they have to spend six or more hours a day with the crane."

Santoni Autogrù is so pleased with its Grove cranes that it continues to expand the fleet. The company will next receive a GMK5150XL, which arrives at the end of this year.

Grove GMK4100L-2 and GMK4100L-1

Grove's GMK4100L-2 all-terrain crane is a four-axle, 110 ton capacity crane that delivers both compact size and power. It has a width of only 8.3 ft. and MEGATRAK suspension, allowing it to maneuver well into and out of position on job sites.

It also boasts the best load charts in its class and is capable of carrying 7.5 tons of counterweight in its taxi configuration, for an overall vehicle weight within 13 tons per axle.

The predecessor GMK4100L-1 also has a 110 ton capacity and impressive taxi crane capabilities combined with a compact design. With a vehicle width of just 8.3 ft., it can easily travel to even the most confined city center job sites. The GMK4100L-1 can carry up to 7.3 tons of counterweight within 13.2 tons per axle and has a towering 197 ft. main boom.

Santoni Autogrù is a family-run, crane rental and transport company based in the Trentino-Alto Adige region of northern Italy. It was founded in 1952 and offers mobile crane rental as well as transportation services.

For more information, visit www.manitowoc.com.

This story also appears on Crane Equipment Guide.

Today's top stories

Depreciation Bonus Begins Phase-Out

California's I-80 Pavement Rehab Project Moving Along

VIDEO: Vermeer Unveils D24 Horizontal Directional Drill, Marking New Era in Utility Installation

ConExpo-Con/AGG Releases Essential Guide for Hiring, Retaining Top Construction Talent

Ole Miss Progressing Toward Construction of $125M Accountancy School

Boston, MBTA Officials Reveal New Designs for Future Blue Hill Avenue Transit Project

National Attachments Celebrates Its 35th Anniversary

CEG Speaks With New President of Chadwick-BaRoss, Thompson Equipment