Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
MACHINE SOLD
Hours: | 2910 |
Serial Number: | EZW00940 |
Machine Location: | MINNEAPOLIS, MN |
More Information: | https://catused.com/cu/10146631 |
Supplied by HeavyEquipmentData.com →
Air Conditioning System | |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
Cab | |
FOPS | ISO 3449:2005 Level I |
FOPS Level II | ISO 3449:2005 Level II |
ROPS | ISO 3471:2008 |
Dimensions | |
Bucket Pin Height - Carry Position | 8.5 in ( 22 cm ) |
Bucket Pin Height - Maximum Lift | 10.2 ft ( 3 m ) |
Bucket Pin Reach - Maximum Lift | 14.5 in ( 37 cm ) |
Clearance at Maximum Lift and Dump | 90.5 in ( 230 cm ) |
Departure Angle | 35.0 deg |
Ground Clearance | 0.8 ft ( 0 m ) |
Height - Top of Cab | 7.0 ft ( 2 m ) |
Length - Track on Ground | 59.0 in ( 150 cm ) |
Length - With Bucket on Ground | 137.3 in ( 349 cm ) |
Length - Without Bucket | 108.9 in ( 277 cm ) |
Maximum Dump Angle | 52.0 deg |
Maximum Overall Height | 154.8 in ( 393 cm ) |
Maximum Reach - With Arms Parallel to Ground | 52.5 in ( 133 cm ) |
Overall Length - Track | 74.7 in ( 190 cm ) |
Rack Back Angle - Maximum Height | 87.0 deg |
Reach - Maximum Lift/Dump | 25.1 in ( 64 cm ) |
Turning Radius from Center - Bucket | 86.3 in ( 219 cm ) |
Turning Radius from Center - Coupler | 55.1 in ( 140 cm ) |
Turning Radius from Center - Machine Rear | 61.2 in ( 155 cm ) |
Vehicle Width | 66.0 in ( 168 cm ) |
Engine | |
Bore | 3.7 in ( 9 cm ) |
Displacement | 203.0 cu in ( 3,327 cu cm ) |
Engine Model | Cat C3.3B DIT (turbo) |
Gross Power - SAE J1995 | 74.3 hp ( 55 kw ) |
Net Power | 73.2 hp ( 55 kw ) |
Net Power - ISO 9249 | 73.9 hp ( 55 kw ) |
Net Power - SAE 1349 | 73.2 hp ( 55 kw ) |
Peak Torque - 1,500 rpm - SAE J1995 | 195.0 ft ( 59 m ) |
Stroke | 4.7 in ( 12 cm ) |
General Specifications | |
category | COMPACT TRACK LOADERS |
ENGINE POWER HP (KW) | 73 (54) |
MODEL | 257D |
OPERATING LOAD LBS. (KG) | 2,800 (1,270) |
OPERATING WIDTH IN. (CM) | 68 (168) |
RATED OPERATING CAPACITY LBS. (KG) (35%) | 1,960 (889) |
RATED OPERATING CAPACITY LBS. (KG) (50%) | 1,960 (889) |
Hydraulic System | |
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 58.0 hp ( 43 kw ) |
Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 39.0 hp ( 29 kw ) |
Hydraulic Flow - Standard - Loader Hydraulic Flow | 20.0 gpm ( 76 lpm ) |
Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3,335.0 psi |
Loader | |
Operating Load Rating | 1,960.0 lbs ( 889 kg ) |
Operating Width | 66.0 in ( 168 cm ) |
Noise Level | |
Inside Cab* | 83 dB(A) |
Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
Note (3) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
Outside Cab** | 103 dB(A) |
Operating Specifications | |
Breakout Force - Tilt Cylinder | 5,035.0 lbs ( 2,284 kg ) |
Ground Contact Area | 1,770.0 cu in ( 29,005 cu cm ) |
Ground Pressure | 4.5 psi |
Rated Operating Capacities - 35% Tipping Load | 1,960.0 lbs ( 889 kg ) |
Rated Operating Capacities - 50% Tipping Load | 2,800.0 lbs ( 1,270 kg ) |
Rated Operating Capacity with Optional Counterweight | 3,000.0 lbs ( 1,361 kg ) |
Tipping Load | 5,600.0 lbs ( 2,540 kg ) |
Power Train | |
Travel Speed - Forward or Reverse - One Speed | 6.3 mph ( 10 kph ) |
Service Refill Capacities | |
Cooling System | 3.7 gal ( 14 l ) |
Engine Crankcase | 3.0 gal ( 11 l ) |
Fuel Tank | 27.7 gal ( 105 l ) |
Hydraulic System | 13.2 gal ( 50 l ) |
Hydraulic Tank | 10.3 gal ( 39 l ) |