List Your Equipment For Free  /  Seller Login

2016 Caterpillar 259D For Sale in Pleasureville, KY



For Sale: $48,750.00 USD

Apply for Financing

Machine Info:

Serial Number:CAT0259DLFTL06238
Machine Location:PLEASUREVILLE, KY

Description:

Bucket, Aux Hydraulics, Canopy, Joystick Strg, 2 Speed very good condition, low hours


From the manufacturer:

Supplied by HeavyEquipmentData.com →

Air Conditioning System
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Cab
FOPS ISO 3449:2005 Level I
FOPS Level II ISO 3449:2005 Level II
ROPS ISO 3471:2008
Dimensions
Bucket Pin Height - Carry Position 7.8 in  ( 20 cm )
Bucket Pin Height - Maximum Lift 10.1 ft  ( 3 m )
Bucket Pin Reach - Maximum Lift 9.4 in  ( 24 cm )
Clearance at Max Lift and Dump 7.5 ft  ( 2 m )
Clearance at Maximum Lift and Dump 89.9 in  ( 228 cm )
Departure Angle 35.0 deg
Dump angle 52.0 deg
Ground Clearance 8.9 in  ( 23 cm )
Height - Top of Cab 7.0 ft  ( 2 m )
Length - Track on Ground 59.0 in  ( 150 cm )
Length - with Bucket 11.5 ft  ( 4 m )
Length - With Bucket on Ground 137.3 in  ( 349 cm )
Maximum Dump Angle 52.0 deg
Maximum Overall Height 154.1 in  ( 391 cm )
Maximum Reach - With Arms Parallel to Ground 51.4 in  ( 131 cm )
Overall Height 12.9 ft  ( 4 m )
Overall Length - Track 78.7 in  ( 200 cm )
Overall Track Length 6.6 ft  ( 2 m )
Rack Back Angle - Maximum Height 87.0 deg
Reach - Maximum Lift/Dump 23.9 in  ( 61 cm )
Reach at Max Lift and Dump 2.0 ft  ( 1 m )
Turning Radius from Center - Bucket 86.0 in  ( 218 cm )
Turning Radius from Center - Coupler 54.8 in  ( 139 cm )
Turning Radius from Center - machine rear 61.5 in  ( 156 cm )
Vehicle Width (320 mm/12.6 in tracks) 66.0 in  ( 168 cm )
Vehicle Width (400 mm/15.7 in tracks) 69.0 in  ( 175 cm )
Engine
Bore 3.7 in  ( 9 cm )
Displacement 203.0 cu in  ( 3,327 cu cm )
Engine Make DIT
Engine Model Cat C3.3B DIT (turbo)
Gross Power 74.3 hp  ( 55 kw )
Gross Power - SAE J1995 74.3 hp  ( 55 kw )
Net Power 73.2 hp  ( 55 kw )
Net Power - ISO 9249 73.9 hp  ( 55 kw )
Net Power - SAE 1349 73.2 hp  ( 55 kw )
Peak Torque 195.5 lbs ft  ( 265 nm )
Peak Torque - 1,500 rpm - SAE J1995 195.0 ft  ( 59 m )
Stroke 4.7 in  ( 12 cm )
Torque Measured @ 1,500.0 rpm
General Specifications
category COMPACT TRACK LOADERS
ENGINE POWER HP (KW) 73 (54)
MODEL 259D
OPERATING LOAD LBS. (KG) 2,900 (1,315)
OPERATING WIDTH IN. (CM) 66 (168) / 69 (175)
RATED OPERATING CAPACITY LBS. (KG) (35%) 2,030 (921)
RATED OPERATING CAPACITY LBS. (KG) (50%) 2,030 (921)
Hydraulic System
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 58.0 hp  ( 43 kw )
Hydraulic Flow - High Flow - Loader Hydraulic Flow 30.0 gpm  ( 114 lpm )
Hydraulic Flow - High Flow - Loader Hydraulic Pressure 3,335.0 psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 39.0 hp  ( 29 kw )
Hydraulic Flow - Standard - Loader Hydraulic Flow 20.0 gpm  ( 76 lpm )
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3,335.0 psi
Pump Flow 20.1 gpm  ( 76 lpm )
Relief Valve Pressure 3,335.9 psi
Loader
Breakout Force 5,035.4 lbs  ( 2,284 kg )
Operating Load 2,899.1 lbs  ( 1,315 kg )
Operating Width 66.0 in  ( 168 cm )
Tipping Load 5,800.4 lbs  ( 2,631 kg )
Noise Level
Inside Cab* 83 dB(A)
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3) ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab** 103 dB(A)
Operating Specifications
Alternator Supplied Amperage 80.0 amps
Breakout Force - Tilt Cylinder 5,035.0 lbs  ( 2,284 kg )
Cooling System Fluid Capacity 3.7 gal  ( 14 l )
Engine Oil Capacity 3.0 gal  ( 11 l )
Fuel Capacity 27.8 gal  ( 105 l )
Ground Contact Area - With 320 mm/12.6 in Track 1,483.0 cu in  ( 24,302 cu cm )
Ground Contact Area - With 400 mm/15.7 in Track 1,848.0 cu in  ( 30,283 cu cm )
Ground Pressure - With 320 mm/12.6 in Track 6.0 psi
Ground Pressure - With 400 mm/15.7 in Track 4.8 psi
Hydraulic System Fluid Capacity 13.3 gal  ( 50 l )
Max Speed - high range 8.6 mph  ( 14 kph )
Max Speed - low range 6.0 mph  ( 10 kph )
Operating Voltage 12.0 volts
Operating Weight 8,847.2 lbs  ( 4,013 kg )
Rated Operating Capacities - 35% Tipping Load 2,030.0 lbs  ( 921 kg )
Rated Operating Capacities - 50% Tipping Load 2,900.0 lbs  ( 1,315 kg )
Rated Operating Capacity with Optional Counterweight 3,100.0 lbs  ( 1,406 kg )
Tipping Load 5,800.0 lbs  ( 2,631 kg )
Power Train
Travel Speed - Forward or Reverse - One Speed 5.9 mph  ( 10 kph )
Travel Speed - Forward or Reverse - Two Speed 8.5 mph  ( 14 kph )
Service Refill Capacities
Cooling System 3.7 gal  ( 14 l )
Engine Crankcase 3.0 gal  ( 11 l )
Fuel Tank 27.7 gal  ( 105 l )
Hydraulic System 13.2 gal  ( 50 l )
Hydraulic Tank 10.3 gal  ( 39 l )
Undercarriage
Ground Contact Area 1,488.1 cu in  ( 24,386 cu cm )
Ground Pressure 6.0 psi
Length of Track on Ground 11.5 ft  ( 4 m )
Weights
Operating Weight 8,945.0 lbs  ( 4,057 kg )

Dealer Contact Info:

Clark Heavy Equipment

Fax: 502-878-5202



Contact: Taylor Steverson

Click for Phone Number


veritread button





39.96118 \\ -82.99879 \\ Columbus \\ OH \\ 43085