Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
MACHINE SOLD
Click here to place a bidHours: | 3771 |
Serial Number: | CAT0259DCFTK00271 |
Machine Location: | AUSTRALIA, AUS |
Supplied by HeavyEquipmentData.com →
Air Conditioning System | |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
Cab | |
FOPS | ISO 3449:2005 Level I |
FOPS Level II | ISO 3449:2005 Level II |
ROPS | ISO 3471:2008 |
Dimensions | |
Bucket Pin Height - Carry Position | 7.8 in ( 20 cm ) |
Bucket Pin Height - Maximum Lift | 10.1 ft ( 3 m ) |
Bucket Pin Reach - Maximum Lift | 9.4 in ( 24 cm ) |
Clearance at Max Lift and Dump | 7.5 ft ( 2 m ) |
Clearance at Maximum Lift and Dump | 89.9 in ( 228 cm ) |
Departure Angle | 35.0 deg |
Dump angle | 52.0 deg |
Ground Clearance | 8.9 in ( 23 cm ) |
Height - Top of Cab | 7.0 ft ( 2 m ) |
Length - Track on Ground | 59.0 in ( 150 cm ) |
Length - with Bucket | 11.5 ft ( 4 m ) |
Length - With Bucket on Ground | 137.3 in ( 349 cm ) |
Maximum Dump Angle | 52.0 deg |
Maximum Overall Height | 154.1 in ( 391 cm ) |
Maximum Reach - With Arms Parallel to Ground | 51.4 in ( 131 cm ) |
Overall Height | 12.9 ft ( 4 m ) |
Overall Length - Track | 78.7 in ( 200 cm ) |
Overall Track Length | 6.6 ft ( 2 m ) |
Rack Back Angle - Maximum Height | 87.0 deg |
Reach - Maximum Lift/Dump | 23.9 in ( 61 cm ) |
Reach at Max Lift and Dump | 2.0 ft ( 1 m ) |
Turning Radius from Center - Bucket | 86.0 in ( 218 cm ) |
Turning Radius from Center - Coupler | 54.8 in ( 139 cm ) |
Turning Radius from Center - machine rear | 61.5 in ( 156 cm ) |
Vehicle Width (320 mm/12.6 in tracks) | 66.0 in ( 168 cm ) |
Vehicle Width (400 mm/15.7 in tracks) | 69.0 in ( 175 cm ) |
Engine | |
Bore | 3.7 in ( 9 cm ) |
Displacement | 203.0 cu in ( 3,327 cu cm ) |
Engine Make | DIT |
Engine Model | Cat C3.3B DIT (turbo) |
Gross Power | 74.3 hp ( 55 kw ) |
Gross Power - SAE J1995 | 74.3 hp ( 55 kw ) |
Net Power | 73.2 hp ( 55 kw ) |
Net Power - ISO 9249 | 73.9 hp ( 55 kw ) |
Net Power - SAE 1349 | 73.2 hp ( 55 kw ) |
Peak Torque | 195.5 lbs ft ( 265 nm ) |
Peak Torque - 1,500 rpm - SAE J1995 | 195.0 ft ( 59 m ) |
Stroke | 4.7 in ( 12 cm ) |
Torque Measured @ | 1,500.0 rpm |
General Specifications | |
category | COMPACT TRACK LOADERS |
ENGINE POWER HP (KW) | 73 (54) |
MODEL | 259D |
OPERATING LOAD LBS. (KG) | 2,900 (1,315) |
OPERATING WIDTH IN. (CM) | 66 (168) / 69 (175) |
RATED OPERATING CAPACITY LBS. (KG) (35%) | 2,030 (921) |
RATED OPERATING CAPACITY LBS. (KG) (50%) | 2,030 (921) |
Hydraulic System | |
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 58.0 hp ( 43 kw ) |
Hydraulic Flow - High Flow - Loader Hydraulic Flow | 30.0 gpm ( 114 lpm ) |
Hydraulic Flow - High Flow - Loader Hydraulic Pressure | 3,335.0 psi |
Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 39.0 hp ( 29 kw ) |
Hydraulic Flow - Standard - Loader Hydraulic Flow | 20.0 gpm ( 76 lpm ) |
Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3,335.0 psi |
Pump Flow | 20.1 gpm ( 76 lpm ) |
Relief Valve Pressure | 3,335.9 psi |
Loader | |
Breakout Force | 5,035.4 lbs ( 2,284 kg ) |
Operating Load | 2,899.1 lbs ( 1,315 kg ) |
Operating Width | 66.0 in ( 168 cm ) |
Tipping Load | 5,800.4 lbs ( 2,631 kg ) |
Noise Level | |
Inside Cab* | 83 dB(A) |
Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
Note (3) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
Outside Cab** | 103 dB(A) |
Operating Specifications | |
Alternator Supplied Amperage | 80.0 amps |
Breakout Force - Tilt Cylinder | 5,035.0 lbs ( 2,284 kg ) |
Cooling System Fluid Capacity | 3.7 gal ( 14 l ) |
Engine Oil Capacity | 3.0 gal ( 11 l ) |
Fuel Capacity | 27.8 gal ( 105 l ) |
Ground Contact Area - With 320 mm/12.6 in Track | 1,483.0 cu in ( 24,302 cu cm ) |
Ground Contact Area - With 400 mm/15.7 in Track | 1,848.0 cu in ( 30,283 cu cm ) |
Ground Pressure - With 320 mm/12.6 in Track | 6.0 psi |
Ground Pressure - With 400 mm/15.7 in Track | 4.8 psi |
Hydraulic System Fluid Capacity | 13.3 gal ( 50 l ) |
Max Speed - high range | 8.6 mph ( 14 kph ) |
Max Speed - low range | 6.0 mph ( 10 kph ) |
Operating Voltage | 12.0 volts |
Operating Weight | 8,847.2 lbs ( 4,013 kg ) |
Rated Operating Capacities - 35% Tipping Load | 2,030.0 lbs ( 921 kg ) |
Rated Operating Capacities - 50% Tipping Load | 2,900.0 lbs ( 1,315 kg ) |
Rated Operating Capacity with Optional Counterweight | 3,100.0 lbs ( 1,406 kg ) |
Tipping Load | 5,800.0 lbs ( 2,631 kg ) |
Power Train | |
Travel Speed - Forward or Reverse - One Speed | 5.9 mph ( 10 kph ) |
Travel Speed - Forward or Reverse - Two Speed | 8.5 mph ( 14 kph ) |
Service Refill Capacities | |
Cooling System | 3.7 gal ( 14 l ) |
Engine Crankcase | 3.0 gal ( 11 l ) |
Fuel Tank | 27.7 gal ( 105 l ) |
Hydraulic System | 13.2 gal ( 50 l ) |
Hydraulic Tank | 10.3 gal ( 39 l ) |
Undercarriage | |
Ground Contact Area | 1,488.1 cu in ( 24,386 cu cm ) |
Ground Pressure | 6.0 psi |
Length of Track on Ground | 11.5 ft ( 4 m ) |
Weights | |
Operating Weight | 8,945.0 lbs ( 4,057 kg ) |