Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Auction Pricing
Hours: | 4880 |
Serial Number: | CAT0279CEKWB00516 |
Machine Location: | TORONTO, ON |
Supplied by HeavyEquipmentData.com →
Cab | |
FOPS | SAE J1043 SEPT87 ISO 3449:1992 Level I |
FOPS Level II | SAE J231 JAN81 ISO 3449:1992 Level II |
ROPS | SAE J1040 MAY94 ISO 3471:1994 |
Dimensions | |
Bucket Pin Height - Carry Position | 7.7 in ( 20 cm ) |
Bucket Pin Height - Maximum Lift | 10.3 ft ( 3 m ) |
Clearance at Max Lift and Dump | 8.0 ft ( 2 m ) |
Clearance at Maximum Lift and Dump | 95.6 in ( 243 cm ) |
Departure Angle | 44.0 deg |
Ground Clearance | 9.1 in ( 23 cm ) |
Height - Top of Cab | 7.0 ft ( 2 m ) |
Length - Track on Ground | 69.6 in ( 177 cm ) |
Length - with Bucket | 12.1 ft ( 4 m ) |
Length - With Bucket on Ground | 144.8 in ( 368 cm ) |
Maximum Dump Angle | 40.0 deg |
Maximum Overall Height | 157.7 in ( 401 cm ) |
Maximum Reach - With Arms Parallel | 54.6 in ( 139 cm ) |
Overall Length - Track | 89.4 in ( 227 cm ) |
Rack Back Angle - Maximum Height | 85.0 deg |
Reach at Max Lift and Dump | 2.0 ft ( 1 m ) |
Reach at Maximum Lift/Dump | 23.4 in ( 59 cm ) |
Turn Radius from Center - Bucket | 91.1 in ( 231 cm ) |
Turn Radius from Center - Coupler | 57.9 in ( 147 cm ) |
Turn Radius from Center - Rear | 64.6 in ( 164 cm ) |
Turning Radius from Center - inc bucket | 91.2 in ( 232 cm ) |
Turning Radius from Center - machine rear | 64.6 in ( 164 cm ) |
Vehicle Width | 78.0 in ( 198 cm ) |
Width Over Tracks | 6.5 ft ( 2 m ) |
Engine | |
Aspiration | Turbocharged |
Bore | 3.4 in ( 9 cm ) |
Displacement | 201.0 cu in ( 3,294 cu cm ) |
Engine Model | Cat C3.4T |
Gross Power | 84.0 hp ( 63 kw ) |
Gross Power - SAE J1995 | 84.0 hp ( 63 kw ) |
Net Power | 82.0 hp ( 61 kw ) |
Net Power - SAE 1349 | 82.0 hp ( 61 kw ) |
Number of Cylinders | 4.0 |
Power Measured @ | 2,500.0 rpm |
Stroke | 4.7 in ( 12 cm ) |
Hydraulic System | |
Hydraulic Flow (1) | Standard |
Hydraulic Flow (2) | High Flow XPS |
Hydraulic Power | 42.8 hp ( 32 kw ) |
Loader Hydraulic Flow | 22.0 gpm ( 83 lpm ) |
Loader Hydraulic Pressure | 3,335.0 psi |
Maximum Loader Hydraulic Flow | 33.0 gpm ( 125 lpm ) |
Maximum Loader Hydraulic Pressure | 4,061.0 psi |
Pump Flow | 22.2 gpm ( 84 lpm ) |
Relief Valve Pressure | 3,335.0 psi |
Loader | |
Breakout Force | 7,308.0 lbs ( 3,315 kg ) |
Bucket Capacity | 0.6 cu yd ( 0 cu m ) |
Operating Load | 3,200.0 lbs ( 1,452 kg ) |
Tipping Angle | 6,483.0 deg |
Operating Specifications | |
Alternator Supplied Amperage | 90.0 amps |
Breakout Force - Tilt Cylinder | 7,308.0 lbs ( 3,315 kg ) |
Cooling System Fluid Capacity | 3.7 gal ( 14 l ) |
Engine Oil Capacity | 2.7 gal ( 10 l ) |
Fuel Capacity | 25.9 gal ( 98 l ) |
Ground Contact Area | 2,504.0 cu in ( 41,033 cu cm ) |
Ground Pressure | 4.0 psi |
Hydraulic System Fluid Capacity | 15.1 gal ( 57 l ) |
Max Speed - high range | 8.5 mph ( 14 kph ) |
Max Speed - low range | 5.1 mph ( 8 kph ) |
Operating Voltage | 12.0 volts |
Operating Weight | 9,892.0 lbs ( 4,487 kg ) |
Rated Operating Capacities - 35% Tipping Load | 2,240.0 lbs ( 1,016 kg ) |
Rated Operating Capacities - 50% Tipping Load | 3,200.0 lbs ( 1,452 kg ) |
Rated Operating Capacity with Optional Counterweight | 3,465.0 lbs ( 1,572 kg ) |
Tipping Load | 6,483.0 lbs ( 2,941 kg ) |
Power Train | |
Travel Speed Forward | 5.0 mph ( 8 kph ) |
Travel Speed Forward - 2-Speed | 8.5 mph ( 14 kph ) |
Travel Speed Reverse | 5.0 mph ( 8 kph ) |
Travel Speed Reverse - 2-Speed | 8.5 mph ( 14 kph ) |
Service Refill Capacities | |
Cooling System | 3.7 gal ( 14 l ) |
Engine Crankcase | 2.6 gal ( 10 l ) |
Fuel Tank | 26.0 gal ( 98 l ) |
Hydraulic System | 15.0 gal ( 57 l ) |
Hydraulic Tank | 11.0 gal ( 42 l ) |
Undercarriage | |
Ground Contact Area | 2,504.0 cu in ( 41,033 cu cm ) |
Ground Pressure | 4.0 psi |
Length of Track on Ground | 5.8 ft ( 2 m ) |
Weights | |
Operating Weight | 9,892.0 lbs ( 4,487 kg ) |