Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $28,500.00 USD
Apply for FinancingHours: | 3731 |
Serial Number: | KWB00937 |
Machine Location: | PISCATAWAY, NJ |
More Information: | https://catused.com/cu/10120819 |
Supplied by HeavyEquipmentData.com →
Cab | |
FOPS | SAE J1043 SEPT87, ISO 3449:1992 Level I |
FOPS Level II | SAE J231 JAN81, ISO 3449:1992 Level II |
ROPS | SAE J1040 MAY94, ISO 3471:1994 |
Dimensions | |
Bucket hinge pin | 123.2 in ( 313 cm ) |
Bucket Pin Height - Carry Position | 7.7 in ( 20 cm ) |
Bucket Pin Height - Maximum Lift | 10.3 ft ( 3 m ) |
Clearance at Max Lift and Dump | 8.0 ft ( 2 m ) |
Clearance at Maximum Lift and Dump | 95.6 in ( 243 cm ) |
Departure Angle | 44 deg |
Dump angle | 40 deg |
Ground Clearance | 9.1 in ( 23 cm ) |
Height - Top of Cab | 7.0 ft ( 2 m ) |
Length - Track on Ground | 64.0 in ( 163 cm ) |
Length - with Bucket | 12.1 ft ( 4 m ) |
Length - With Bucket on Ground | 144.8 in ( 368 cm ) |
Maximum Dump Angle | 40 deg |
Maximum Overall Height | 157.7 in ( 401 cm ) |
Maximum Reach - With Arms Parallel | 54.6 in ( 139 cm ) |
Overall height | 13.2 ft ( 4 m ) |
Overall Length - Track | 83.8 in ( 213 cm ) |
Overall Track Length | 7.0 ft ( 2 m ) |
Rack Back Angle - Maximum Height | 85 deg |
Reach at Max Lift and Dump | 2.0 ft ( 1 m ) |
Reach at Maximum Lift/Dump | 23.4 in ( 59 cm ) |
Turn Radius from Center - Bucket | 88.1 in ( 224 cm ) |
Turn Radius from Center - Coupler | 57.4 in ( 146 cm ) |
Turn Radius from Center - Rear | 69.4 in ( 176 cm ) |
Turning Radius from Center - machine rear | 68.0 in ( 173 cm ) |
Vehicle Width | 78.0 in ( 198 cm ) |
Width Over Tracks | 6.5 ft ( 2 m ) |
Engine | |
Bore | 3.4 in ( 9 cm ) |
Displacement | 201.0 cu in ( 3,294 cu cm ) |
Engine Make | Caterpillar |
Engine Model | Cat C3.4T |
Gross Power | 73.8 hp ( 55 kw ) |
Gross Power - SAE J1995 | 74.0 hp ( 55 kw ) |
Net Power | 73.0 hp ( 54 kw ) |
Net Power - SAE 1349 | 73.0 hp ( 54 kw ) |
Stroke | 4.7 in ( 12 cm ) |
Hydraulic System | |
Hydraulic Flow (1) | Standard |
Hydraulic Flow (2) | High Flow XPS |
Hydraulic Power | 42.8 hp ( 32 kw ) |
Loader Hydraulic Flow | 22.0 gpm ( 83 lpm ) |
Loader Hydraulic Pressure | 3,335.0 psi |
Maximum Loader Hydraulic Flow | 33.0 gpm ( 125 lpm ) |
Maximum Loader Hydraulic Pressure | 4,061.0 psi |
Pump Flow | 22.2 gpm ( 84 lpm ) |
Pump Type | Standard |
Relief Valve Pressure | 3,335.9 psi |
Loader | |
Breakout Force | 7,308.4 lbs ( 3,315 kg ) |
Operating capacity (ISO 14397) | 3,049.0 lbs ( 1,383 kg ) |
Tipping Load | 6,100.2 lbs ( 2,767 kg ) |
Operating Specifications | |
Alternator Supplied Amperage | 90 amps |
Breakout Force - Tilt Cylinder | 7,308.0 lbs ( 3,315 kg ) |
Cooling System Fluid Capacity | 3.7 gal ( 14 l ) |
Fuel Capacity | 25.9 gal ( 98 l ) |
Ground Contact Area | 2,303.0 cu in ( 37,739 cu cm ) |
Ground Pressure | 4.3 psi |
Hydraulic System Fluid Capacity | 15.1 gal ( 57 l ) |
Operating Voltage | 12.0 volts |
Operating Weight | 9,865.7 lbs ( 4,475 kg ) |
Rated Operating Capacities - 35% Tipping Load | 2,135.0 lbs ( 968 kg ) |
Rated Operating Capacities - 50% Tipping Load | 3,050.0 lbs ( 1,383 kg ) |
Tipping Load | 6,100.0 lbs ( 2,767 kg ) |
Travel Speed | 8.5 mph ( 14 kph ) |
Power Train | |
Travel Speed Forward | 5.0 mph ( 8 kph ) |
Travel Speed Forward - 2-Speed | 8.5 mph ( 14 kph ) |
Travel Speed Reverse | 5.0 mph ( 8 kph ) |
Travel Speed Reverse - 2-Speed | 8.5 mph ( 14 kph ) |
Service Refill Capacities | |
Cooling System | 3.7 gal ( 14 l ) |
Engine Crankcase | 2.6 gal ( 10 l ) |
Fuel Tank | 26.0 gal ( 98 l ) |
Hydraulic System | 15.0 gal ( 57 l ) |
Hydraulic Tank | 11.0 gal ( 42 l ) |
Undercarriage | |
Counterweight, Standard | 125.7 lbs ( 57 kg ) |
Ground Contact Area | 2,309.6 cu in ( 37,848 cu cm ) |
Ground Pressure | 4.3 psi |
Length of Track on Ground | 5.4 ft ( 2 m ) |
Weights | |
Operating Weight | 9,865.0 lbs ( 4,475 kg ) |