| Air Conditioning System |
| Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
| Cab |
| FOPS |
ISO 3449:2005 Level I |
| FOPS Level II |
ISO 3449:2005 Level II |
| ROPS |
ISO 3471:2008 |
| Dimensions |
| Bucket Pin Height - Carry Position |
7.9 in ( 20 cm ) |
| Bucket Pin Height - Maximum Lift |
10.7 ft ( 3 m ) |
| Bucket Pin Reach - Maximum Lift |
15.2 in ( 39 cm ) |
| Clearance at Maximum Lift and Dump |
96.3 in ( 245 cm ) |
| Departure Angle |
30.0 deg |
| Ground Clearance |
0.8 ft ( 0 m ) |
| Height - Top of Cab |
7.0 ft ( 2 m ) |
| Length - Track on Ground |
71.1 in ( 181 cm ) |
| Length - With Bucket on Ground |
155.2 in ( 394 cm ) |
| Length - Without Bucket |
126.0 in ( 320 cm ) |
| Maximum Dump Angle |
52.0 deg |
| Maximum Overall Height |
160.5 in ( 408 cm ) |
| Maximum Reach - With Arms Parallel to Ground |
49.6 in ( 126 cm ) |
| Overall Length - Track |
90.0 in ( 229 cm ) |
| Rack Back Angle - Maximum Height |
83.0 deg |
| Reach - Maximum Lift/Dump |
30.5 in ( 77 cm ) |
| Roll Back Angle |
27.0 deg |
| Turning Radius from Center - Bucket (racked) |
91.8 in ( 233 cm ) |
| Turning Radius from Center - Coupler |
59.2 in ( 150 cm ) |
| Turning Radius from Center - Machine Rear |
73.4 in ( 186 cm ) |
| Vehicle Width |
78.1 in ( 198 cm ) |
| Engine |
| Bore |
3.9 in ( 10 cm ) |
| Displacement |
232.0 cu in ( 3,802 cu cm ) |
| Engine Model |
Cat C3.8 DIT (turbo) |
| Gross Power |
95.0 hp ( 71 kw ) |
| Gross Power - SAE J1995 |
98.0 hp ( 73 kw ) |
| Net Power |
95.0 hp ( 71 kw ) |
| Net Power - ISO 9249 |
95.0 hp ( 71 kw ) |
| Net Power - SAE 1349 |
95.0 hp ( 71 kw ) |
| Peak Torque - 1,500 rpm - SAE J1995 |
246.0 ft ( 75 m ) |
| Stroke |
4.7 in ( 12 cm ) |
| General Specifications |
| Category |
Compact Track Loaders |
| ENGINE POWER HP (KW) |
95 (71) |
| MODEL |
297D2 |
| OPERATING LOAD LBS. (KG) |
4,700 (2,132) |
| OPERATING WIDTH IN. (CM) |
76 (193) |
| Hydraulic System |
| Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) |
76.0 hp ( 57 kw ) |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow |
32.0 gpm ( 121 lpm ) |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure |
4,061.0 psi |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) |
44.0 hp ( 33 kw ) |
| Hydraulic Flow - Standard - Loader Hydraulic Flow |
23.0 gpm ( 87 lpm ) |
| Hydraulic Flow - Standard - Loader Hydraulic Pressure |
3,335.0 psi |
| Loader |
| Operating Load Rating |
4,700.0 lbs ( 2,132 kg ) |
| Operating Width |
76.0 in ( 193 cm ) |
| Noise Level |
| Inside Cab* |
83 dB(A) |
| Note (1) |
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (3) |
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Outside Cab** |
104 dB(A) |
| Operating Specifications |
| Breakout Force - Lift Cylinder |
6,072.0 lbs ( 2,754 kg ) |
| Breakout Force - Tilt Cylinder |
7,468.0 lbs ( 3,387 kg ) |
| Ground Contact Area |
2,561.0 cu in ( 41,967 cu cm ) |
| Ground Pressure |
4.2 psi |
| Rated Operating Capacities - 35% Tipping Load |
3,290.0 lbs ( 1,492 kg ) |
| Rated Operating Capacities - 50% Tipping Load |
4,700.0 lbs ( 2,132 kg ) |
| Rated Operating Capacity with Optional Counterweight |
4,960.0 lbs ( 2,250 kg ) |
| Tipping Load |
9,400.0 lbs ( 4,264 kg ) |
| Power Train |
| Travel Speed - Forward or Reverse - One Speed |
5.9 mph ( 10 kph ) |
| Travel Speed - Forward or Reverse - Two Speed |
9.4 mph ( 15 kph ) |
| Service Refill Capacities |
| Cooling System |
4.1 gal ( 16 l ) |
| Diesel Exhaust Fluid (DEF) Tank |
5.0 gal ( 19 l ) |
| Engine Crankcase |
3.5 gal ( 13 l ) |
| Fuel Tank |
32.2 gal ( 122 l ) |
| Hydraulic System |
14.5 gal ( 55 l ) |
| Hydraulic Tank |
10.3 gal ( 39 l ) |
