Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $91,900.00 USD
Apply for FinancingHours: | 171 |
Serial Number: | P3R03358 |
Machine Location: | SAN ANTONIO, TX |
More Information: | https://catused.com/cu/10164457 |
Supplied by HeavyEquipmentData.com →
Cab | |
FOPS | ISO 3449:2005 Level I |
FOPS Level II | ISO 3449:2005 Level II |
ROPS | ISO 3471:2008 |
Dimensions | |
Bucket Pin Height - Carry Position | 7.9 in ( 20 cm ) |
Bucket Pin Height - Maximum Lift | 10.6 ft ( 3 m ) |
Bucket Pin Reach - Maximum Lift | 15.6 in ( 40 cm ) |
Clearance at Max Lift and Dump | 8.0 ft ( 2 m ) |
Clearance at Maximum Lift and Dump | 94.3 in ( 240 cm ) |
Departure Angle | 30.0 deg |
Dump angle | 52.0 deg |
Ground Clearance | 8.7 in ( 22 cm ) |
Height - Top of Cab | 7.0 ft ( 2 m ) |
Length - with Bucket | 10.3 ft ( 3 m ) |
Length - With Bucket on Ground | 151.8 in ( 386 cm ) |
Maximum Dump Angle | 52.0 deg |
Maximum Overall Height | 158.4 in ( 402 cm ) |
Maximum Reach - With Arms Parallel | 50.2 in ( 128 cm ) |
Overall height | 13.3 ft ( 4 m ) |
Overall Length - Track | 89.4 in ( 227 cm ) |
Overall Track Length | 7.5 ft ( 2 m ) |
Rack Back Angle - Maximum Height | 83.0 deg |
Reach at Max Lift and Dump | 2.6 ft ( 1 m ) |
Reach at Maximum Lift/Dump | 30.6 in ( 78 cm ) |
Turn Radius from Center - Bucket | 91.2 in ( 232 cm ) |
Turn Radius from Center - Coupler | 58.0 in ( 147 cm ) |
Turn Radius from Center - Rear | 73.4 in ( 186 cm ) |
Turning Radius from Center - machine rear | 72.8 in ( 185 cm ) |
Vehicle Width | 78.0 in ( 198 cm ) |
Engine | |
Aspiration | Turbocharged |
Bore | 3.9 in ( 10 cm ) |
Displacement | 232.0 cu in ( 3,802 cu cm ) |
Engine Model | Cat C3.8 DIT (Turbo) |
Gross Power | 106.0 hp ( 79 kw ) |
Gross Power - SAE J1995 | 98.0 hp ( 73 kw ) |
Net Power | 95.0 hp ( 71 kw ) |
Net Power - SAE 1349 | 95.0 hp ( 71 kw ) |
Stroke | 4.7 in ( 12 cm ) |
Hydraulic System | |
Hydraulic Flow (1) | Standard |
Hydraulic Flow (2) | High Flow XPS |
Hydraulic Power | 44.0 hp ( 33 kw ) |
Hydraulic Power - Calculated | 76.0 hp ( 57 kw ) |
Loader Hydraulic Flow | 23.0 gpm ( 87 lpm ) |
Loader Hydraulic Pressure | 3,335.0 psi |
Maximum Loader Hydraulic Flow | 32.0 gpm ( 121 lpm ) |
Maximum Loader Hydraulic Pressure | 4,061.0 psi |
Pump Flow | 23.0 gpm ( 87 lpm ) |
Loader | |
Operating Load Rating | 2,975.0 lbs ( 1,349 kg ) |
Operating Width | 76.0 in ( 193 cm ) |
Tipping Load | 8,498.9 lbs ( 3,855 kg ) |
Operating Specifications | |
Alternator Supplied Amperage | 100.0 amps |
Breakout Force - Lift Cylinder | 6,122.0 lbs ( 2,777 kg ) |
Breakout Force - Tilt Cylinder | 7,552.0 lbs ( 3,426 kg ) |
Cooling System Fluid Capacity | 3.7 gal ( 14 l ) |
Fuel Capacity | 31.0 gal ( 117 l ) |
Ground Contact Area | 2,463.0 cu in ( 40,361 cu cm ) |
Ground Pressure | 4.4 psi |
Hydraulic System Fluid Capacity | 16.2 gal ( 61 l ) |
Max Speed - high range | 8.5 mph ( 14 kph ) |
Max Speed - low range | 5.0 mph ( 8 kph ) |
Operating Voltage | 12.0 volts |
Operating Weight | 10,897.5 lbs ( 4,943 kg ) |
Rated Operating Capacities - 35% Tipping Load | 2,975.0 lbs ( 1,349 kg ) |
Rated Operating Capacities - 50% Tipping Load | 4,250.0 lbs ( 1,928 kg ) |
Rated Operating Capacity with Optional Counterweight | 4,500.0 lbs ( 2,041 kg ) |
Tipping Load | 8,500.0 lbs ( 3,856 kg ) |
Power Train | |
Travel Speed Forward | 5.2 mph ( 8 kph ) |
Travel Speed Forward - 2-Speed | 8.4 mph ( 14 kph ) |
Travel Speed Reverse | 5.2 mph ( 8 kph ) |
Travel Speed Reverse - 2-Speed | 8.4 mph ( 14 kph ) |
Service Refill Capacities | |
Cooling System | 4.1 gal ( 16 l ) |
Engine Crankcase | 3.5 gal ( 13 l ) |
Fuel Tank | 32.2 gal ( 122 l ) |
Hydraulic System | 14.5 gal ( 55 l ) |
Hydraulic Tank | 10.3 gal ( 39 l ) |
Undercarriage | |
Ground Contact Area | 2,463.0 cu in ( 40,361 cu cm ) |
Ground Pressure | 4.4 psi |
Weights | |
Operating Weight | 10,718.0 lbs ( 4,862 kg ) |