2018 Caterpillar D6N XL For Sale in Turlock, CA
For Sale: $249,500.00 USD
Apply for Financing
This machine is available to rent.
| Daily | $1000 |
| Weekly | $3000 |
| Monthly | $9000 |
Machine Info:
| Serial Number: | NJN00355 |
| Stock Number: | DD6NXLNJN00355 |
| Machine Location: | TURLOCK, CA |
Description:
EROPS, A/C, 6 WAY DOZER, WIRED FOR TRIMBLE, NEW DIAMOND RIPPER WITH 3 SHANKS. JUST INSTALLED NEW CAT RAILS AND SPROCKETS. REMAINING U/C IS VERY GOOD!, REMAINING POWERTRAIN WARRANTY TILL 04/09/25 OR 2694 HOURS WHICHEVER COMES FIRST, THIS MACHINE IS "WORK READY" -CHECKED THROUGH OUR SHOP WITHIN SERVICE INTERVAL WITH NO LEAKS AND ALL GAUGES,LIGHTS, ETC WORKING PROPERLY
From the manufacturer:
Supplied by HeavyEquipmentData.com →
The latest in the line of Cat D6N dozers combines well-known
versatility with a range of technology features to give you more job
site productivity than ever before. A new transmission with lock-up
clutch torque converter delivers ease of operation, increased net
power, plus a 10-15 percent improvement in fuel efficiency. The D6N
has the weight and horsepower you want for dozing applications and
the balance and stability you need for finish grading – all in one easyto-transport machine.
| Dimensions |
| Drawbar Height (Center of Clevis) from Ground Face of Shoes |
23.5 in ( 60 cm ) |
| Ground Clearance |
1.4 ft ( 0 m ) |
| Height - Top of Cab |
10.2 ft ( 3 m ) |
| Length - Track on Ground |
100.4 in ( 255 cm ) |
| Length of Track on Ground |
8.5 ft ( 3 m ) |
| Length w/o Blade |
12.3 ft ( 4 m ) |
| Track Gauge |
6.3 ft ( 2 m ) |
| Width Over Tracks |
8.2 ft ( 3 m ) |
| Engine |
| Bore |
4.4 in ( 11 cm ) |
| Displacement |
439.0 cu in ( 7,194 cu cm ) |
| Engine Model |
Cat 3126B DITAAC |
| Flywheel Power |
145.0 hp ( 108 kw ) |
| Make |
Cat |
| Net Power - EU 80/1269 |
145.0 hp ( 108 kw ) |
| Net Power - ISO 9249 |
145.0 hp ( 108 kw ) |
| Net Power - SAE J1349 |
143.0 hp ( 107 kw ) |
| Number of Cylinders |
6.0 |
| Power Measured @ |
2,200.0 rpm |
| Stroke |
5.0 in ( 13 cm ) |
| General Specifications |
| ?Model |
D6N XL WH (Tier 4F) |
| Category |
Crawler Dozers Non LGP |
| Engine Power hp (kW) |
166 (124) |
| Engine Type |
C7.1 ACERT |
| Weight lb. (kg) |
40,818 (18,515) |
| Operating Specifications |
| Alternator Supplied Amperage |
70.0 amps |
| Cooling System Fluid Capacity |
9.3 gal ( 35 l ) |
| Final Drives Fluid Capacity |
1.9 gal ( 7 l ) |
| Fuel Capacity |
79.0 gal ( 299 l ) |
| Hydraulic Fluid Capacity |
7.8 gal ( 30 l ) |
| Operating Voltage |
12.0 volts |
| Ripper |
| Beam Cross Section |
216x254 mm 8.5x10.0 in |
| Number of Pockets |
3.0 |
| Overall Beam Width |
86.7 in ( 220 cm ) |
| Ripper Type |
Fixed Parallelogram |
| Weight - Each Additional Shank |
172.0 lbs ( 78 kg ) |
| Service Refill Capacities |
| Cooling System |
10.8 gal ( 41 l ) |
| Final Drive - Each |
1.8 gal ( 7 l ) |
| Fuel Tank |
79.0 gal ( 299 l ) |
| Hydraulic Tank |
7.8 gal ( 30 l ) |
| Standard Blade |
| Capacity |
4.2 cu yd ( 3 cu m ) |
| Height |
49.0 in ( 124 cm ) |
| Width |
10.8 ft ( 3 m ) |
| Transmission |
| 1 Forward |
2.1 mph ( 3 kph ) |
| 1 Reverse |
2.5 mph ( 4 kph ) |
| 2 Forward |
3.6 mph ( 6 kph ) |
| 2 Reverse |
4.3 mph ( 7 kph ) |
| 3 Forward |
6.3 mph ( 10 kph ) |
| 3 Reverse |
7.4 mph ( 12 kph ) |
| Max Speed - Forward |
6.3 mph ( 10 kph ) |
| Max Speed - Reverse |
7.5 mph ( 12 kph ) |
| Number of Forward Gears |
3.0 |
| Number of Reverse Gears |
3.0 |
| Transmission Type |
powershift |
| Undercarriage |
| Ground Contact Area |
4,882.0 cu in ( 80,002 cu cm ) |
| Ground Pressure |
7.4 psi |
| Grouser Height |
2.3 in ( 6 cm ) |
| Number of Shoes per Side |
40.0 |
| Number of Track Rollers per Side |
7.0 |
| Standard Shoe Size |
24.1 in ( 61 cm ) |
| Track Gauge |
6.3 ft ( 2 m ) |
| Winch |
| Drum Diameter |
10.0 in ( 25 cm ) |
| Drum Width |
12.4 in ( 32 cm ) |
| Flange Diameter |
19.8 in ( 50 cm ) |
| Oil Capacity |
19.6 gal ( 74 l ) |
| Weight |
2,814.0 lbs ( 1,276 kg ) |
| Winch and Bracket Length |
45.1 in ( 115 cm ) |
| Winch Case - Width |
38.4 in ( 98 cm ) |
