List Your Equipment For Free  /  Seller Login

Caterpillar D6N XL For Sale in Aurora, CO



For Sale: $310,000.00 USD

Apply for Financing

Wagner Equipment Co.



Contact: Equipment Manager

Click for Phone Number

Machine Info:

Hours:2368
Serial Number:NJN00701
Machine Location:AURORA, CO
More Information:https://catused.com/cu/10089664

Description:

12V CONVERTOR, 10AMP, GRAB IRONS, 2020 CATERPILLA D6N XL DOZER, 2064 GD 11/02/23, 7" COLOR MONITOR/DISPLAY W/EMS, ACCUGRADE,READY-HARNESS ONLY,, AES,EIS,GSA,-ENGINE, FLOOR MAT,, AIR CLEANER, STANDARD, ARO INSTALLATION, VPAT, AS IS / AS RECEIVED, BATTERY, HEAVY DUTY 950CCA, BLADE SHAKE, SLOPE,ASSIST,, BLADE, 129" ARO XL, BULLDOZER 6VPAT, XL, BULLDOZER, VPAT XL, STD PKG, CAB STANDARD PACKAGE, CAB W/EROPS,AC,HEAT,DEF, RADIO,, CAT CERTIFIED USED, COLD WEATHER, 120V, PACKAGE, COVER, COVER, CONSOLE, RIPPER, DIFFERENTIAL STEERING, ELECTRO, DOORS, ENGINE, STANDARD, ENCLOSURE(STD), ENGINE,C7.1, 166HP, TIER 4 FINAL, ETHER STARTING AID, FAN, DEMAND, STANDARD, FENDER(STD), FINAL DRIVE(STD), FRONT PULL DEVICE, TRAVEL ALARM, FUEL TANK GUARD (6 MM THICK), GRILL, FRONT LOUVERED, HD, GUARD GUIDING, CENTER, HD, GUARD, CRANKCASE, HD, GUARD, FRONT LINES, XL,STDR, GUARD, REAR, STANDARD, GUARD, VPAT, HEAVY DUTY, PKG, HEATER, ENGINE COOLANT, 120V, HYDRAULIC OIL, STANDARD, HYDRAULICS, 4 VALVE, 6VPAT, INTERM

Machine Details:

GENERAL APPEARANCE
Cleaning RequiredYes
S.O.S. TakenNo
SAFETY ITEMS
ROPSYes
ROPS Certification PlateYes
GAUGES, OPERATOR STATION, CONSOLE
Current O&MMYes
Current Parts ManualNo
Current Safety ManualYes
ENGINE
Blow ByNo
Compression in RadiatorNo
Fluid Levels OK?Yes
KnockingNo
Oil LeaksNo
Water in OilNo
COOLING SYSTEM
Folded Core RadiatorNo
Leaks - COOLING SYSTEMNo
Modular RadiatorNo
Standard RadiatorYes
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block HeaterNo
Ether AidNo
TRANSMISSION
Leaks - TRANSMISSIONNo
Transmission - NoisyNo
STEERING
Differential SteerGood
Differential Steering ControlsGood
Steering Operating ConditionGood
HYDRAULICS
Leaks - HYDRAULICSYes
BLADE
Cutting Edge & BitsGood
Face / MoldboardGood
KnuckleGood
PinsGood
Push ArmGood
Tilt ArmsGood
TrunnionsGood
RIPPER / GRAPPLE / WINCH
Hydraulic WinchNo
Mechanical WinchNo
UNDERCARRIAGE
Pins & Bushings Turned?No
FINAL DRIVES
Housings, LeftGood
Housings, RightGood
Planetaries / Differential, LeftGood
Planetaries / Differential, RightGood
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
Pins & Bushings Turned?Additional photos


From the manufacturer:

Supplied by HeavyEquipmentData.com →


The latest in the line of Cat D6N dozers combines well-known
versatility with a range of technology features to give you more job
site productivity than ever before. A new transmission with lock-up
clutch torque converter delivers ease of operation, increased net
power, plus a 10-15 percent improvement in fuel efficiency. The D6N
has the weight and horsepower you want for dozing applications and
the balance and stability you need for finish grading – all in one easyto-transport machine.
Dimensions
Drawbar Height (Center of Clevis) from Ground Face of Shoes 23.5 in  ( 60 cm )
Ground Clearance 1.4 ft  ( 0 m )
Height - Top of Cab 10.2 ft  ( 3 m )
Length - Track on Ground 100.4 in  ( 255 cm )
Length of Track on Ground 8.5 ft  ( 3 m )
Length w/o Blade 12.3 ft  ( 4 m )
Track Gauge 6.3 ft  ( 2 m )
Width Over Tracks 8.2 ft  ( 3 m )
Engine
Bore 4.4 in  ( 11 cm )
Displacement 439.0 cu in  ( 7,194 cu cm )
Engine Model Cat 3126B DITAAC
Flywheel Power 145.0 hp  ( 108 kw )
Make Cat
Net Power - EU 80/1269 145.0 hp  ( 108 kw )
Net Power - ISO 9249 145.0 hp  ( 108 kw )
Net Power - SAE J1349 143.0 hp  ( 107 kw )
Number of Cylinders 6.0
Power Measured @ 2,200.0 rpm
Stroke 5.0 in  ( 13 cm )
General Specifications
?Model D6N XL WH (Tier 4F)
Category Crawler Dozers Non LGP
Engine Power hp (kW) 166 (124)
Engine Type C7.1 ACERT
Weight lb. (kg) 40,818 (18,515)
Operating Specifications
Alternator Supplied Amperage 70.0 amps
Cooling System Fluid Capacity 9.3 gal  ( 35 l )
Final Drives Fluid Capacity 1.9 gal  ( 7 l )
Fuel Capacity 79.0 gal  ( 299 l )
Hydraulic Fluid Capacity 7.8 gal  ( 30 l )
Operating Voltage 12.0 volts
Ripper
Beam Cross Section 216x254 mm 8.5x10.0 in
Number of Pockets 3.0
Overall Beam Width 86.7 in  ( 220 cm )
Ripper Type Fixed Parallelogram
Weight - Each Additional Shank 172.0 lbs  ( 78 kg )
Service Refill Capacities
Cooling System 10.8 gal  ( 41 l )
Final Drive - Each 1.8 gal  ( 7 l )
Fuel Tank 79.0 gal  ( 299 l )
Hydraulic Tank 7.8 gal  ( 30 l )
Standard Blade
Capacity 4.2 cu yd  ( 3 cu m )
Height 49.0 in  ( 124 cm )
Width 10.8 ft  ( 3 m )
Transmission
1 Forward 2.1 mph  ( 3 kph )
1 Reverse 2.5 mph  ( 4 kph )
2 Forward 3.6 mph  ( 6 kph )
2 Reverse 4.3 mph  ( 7 kph )
3 Forward 6.3 mph  ( 10 kph )
3 Reverse 7.4 mph  ( 12 kph )
Max Speed - Forward 6.3 mph  ( 10 kph )
Max Speed - Reverse 7.5 mph  ( 12 kph )
Number of Forward Gears 3.0
Number of Reverse Gears 3.0
Transmission Type powershift
Undercarriage
Ground Contact Area 4,882.0 cu in  ( 80,002 cu cm )
Ground Pressure 7.4 psi
Grouser Height 2.3 in  ( 6 cm )
Number of Shoes per Side 40.0
Number of Track Rollers per Side 7.0
Standard Shoe Size 24.1 in  ( 61 cm )
Track Gauge 6.3 ft  ( 2 m )
Winch
Drum Diameter 10.0 in  ( 25 cm )
Drum Width 12.4 in  ( 32 cm )
Flange Diameter 19.8 in  ( 50 cm )
Oil Capacity 19.6 gal  ( 74 l )
Weight 2,814.0 lbs  ( 1,276 kg )
Winch and Bracket Length 45.1 in  ( 115 cm )
Winch Case - Width 38.4 in  ( 98 cm )

Dealer Contact Info:

Wagner Equipment Co.




Contact: Equipment Manager

Click for Phone Number


veritread button





39.96118 \\ -82.99879 \\ Columbus \\ OH