Equipment ↠ Caterpillar ↠ Crawler Dozers ↠ THIS 2007 Caterpillar D6R III LGP

2007 Caterpillar D6R III LGP

Name: 2007 Caterpillar D6R III LGP
Brand: Caterpillar
Price: 1 USD
Availability: OutOfStock

MACHINE SOLD

Click here to place a bid

Ritchie Bros. Auctioneers

Ritchie Bros. Auctioneers Dealer Info

Ritchie Bros. Auctioneers Website

Click here to email Ritchie Bros. Auctioneers.

Click for Phone Number

Machine Info:

Hours:	13190
Serial Number:	CAT00D6RALGP00258
Machine Location:	AUSTRALIA, AUS

Description:

Enclosed Cab, Air Conditioner, Rear View Camera, Pre-Wired for Grade Control, E-Stops, 2013 US EPA Label, Fast Fuel System, 4000 mm Wide Straight Blade w/ Single Tilt, 610 mm Single Grouser Track Shoes, 1 Cylinder Multi-Shank Ripper, Safety Rails LOCATED-IN-BRISBANE-QLD - SERVICE HISTORY INDICATES NEW CAT REMAN ENGINE FITTED @ 12,280 HRS - 10/05/2022 - ADDITIONAL INFORMATION AVAILABLE - THE CLOSING TIMES OF LOT#'s 293 & 294, ARE TIED TOGETHER. IF A BID IS RECEIVED, THEN A TIME-EXTENSION WILL BE APPLIED TO ALL LOTS. ONCE THE TIME CLOSES, THE HIGH BIDDER ON EACH PIECE WILL BE THE WINNER.

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Dimensions
Drawbar Height (Center of Clevis) from Ground Face of Shoes	22.7 in ( 58 cm )
Ground Clearance	1.3 ft ( 0 m )
Length - Track on Ground	104.9 in ( 266 cm )
Track Gauge	6.2 ft ( 2 m )
Engine
Bore	4.4 in ( 11 cm )
Displacement	537.0 cu in ( 8,800 cu cm )
Engine Model	Cat C9 ACERT
Flywheel Power	185.0 hp ( 138 kw )
Gross Power	213.0 hp ( 159 kw )
Net Power - Caterpillar	185.0 hp ( 138 kw )
Net Power - EU 80/1269	185.0 hp ( 138 kw )
Net Power - ISO 9249	185.0 hp ( 138 kw )
Net Power - SAE J1349	183.0 hp ( 136 kw )
Stroke	5.9 in ( 15 cm )
Hydraulic Controls - Pump
Ripper Cylinder Flow	42.3 gpm ( 160 lpm )
Tilt Cylinder Flow	21.1 gpm ( 80 lpm )
Ripper
Beam Cross Section	216 x 254 mm 8.5 x 10 in
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	20.1 in ( 51 cm )
Maximum Penetration	19.7 in ( 50 cm )
Maximum Penetration Force	14,557.0 lbs ( 6,603 kg )
Number of Pockets	3.0
Overall Beam Width	87.0 in ( 221 cm )
Pry-Out Force	20,137.0 lbs ( 9,134 kg )
Ripper Type	Fixed Parallelogram
Weight - Each Additional Shank	163.0 lbs ( 74 kg )
Weight - With One Shank	3,606.0 lbs ( 1,636 kg )
Service Refill Capacities
Cooling System	18.5 gal ( 70 l )
Engine Crankcase	7.4 gal ( 28 l )
Final Drive - Each	3.6 gal ( 14 l )
Fuel Tank	112.0 gal ( 424 l )
Hydraulic Tank	13.6 gal ( 51 l )
Pivot Shaft Compartment	1.3 gal ( 5 l )
Power Train	38.5 gal ( 146 l )
Roller Frames - Each	6.5 gal ( 25 l )
Standards
Brakes	Brakes meet criterion SAE J/ISO 10265 MAR99
Transmission
1 Forward	2.3 mph ( 4 kph )
1 Reverse	3.0 mph ( 5 kph )
2 Forward	4.1 mph ( 7 kph )
2 Reverse	5.2 mph ( 8 kph )
3 Forward	7.1 mph ( 11 kph )
3 Reverse	9.1 mph ( 15 kph )
Undercarriage
Ground Clearance	1.3 ft ( 0 m )
Ground Pressure	6.8 psi
Grouser Height	2.6 in ( 7 cm )
Track Gauge	6.7 ft ( 2 m )
Winch
Drum Capacity - 22 mm (0.88 in)	290.0 ft ( 88 m )
Drum Capacity - 25 mm (1.0 in)	220.0 ft ( 67 m )
Drum Capacity - 29 mm (1.13 in)	220.0 ft ( 67 m )
Drum Diameter	10.0 in ( 25 cm )
Drum Width	13.0 in ( 33 cm )
Ferrule Size (O.D. Length)	54 x 67 mm 2.10 x 2.63 in
Flange Diameter	19.8 in ( 50 cm )
Increased Tractor Length - LGP	15.6 in ( 40 cm )
Increased Tractor Length - STD	20.4 in ( 52 cm )
Increased Tractor Length - XL/XW	20.4 in ( 52 cm )
Oil Capacity	17.8 gal ( 67 l )
Weight	2,600.0 lbs ( 1,179 kg )
Winch and Bracket Length	47.6 in ( 121 cm )
Winch Case - Width	38.4 in ( 98 cm )

Dealer Contact Info:

Ritchie Bros. Auctioneers

Ritchie Bros. Auctioneers Dealer Info

Ritchie Bros. Auctioneers Website

Click here to email Ritchie Bros. Auctioneers.

Contact:

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon