List Your Equipment For Free  /  Seller Login

Caterpillar 12G For Sale in Salem, VA



For Sale: $35,500.00 USD

Apply for Financing

Machine Info:

Hours:8900
Serial Number:061M4655
Machine Location:SALEM, VA
More Information:https://catused.com/cu/10137657

Description:

Accugrade Ready, Air Conditioner, CAT 12G MOTOR GRADER, DRIVE, Moldboard Size, Online Owner's Manual , Ripper

Machine Details:

GENERAL CONDITION
Machine Starts and is OperableYes
S.O.S. (All Compartments)No
Tires are Aired Up and DrivableYes
GENERAL APPEARANCE
Cleaning RequiredYes
SAFETY ITEMS
ROPS Certification PlateNo
Safety Decals In PlaceNo
Safety Decals LegibleNo
OPERATOR STATION
Safety Decals LegibleNot equipped
ENGINE
Apparent Other Engine DamageNo
Blow ByNo
Fuel LeaksNo
KnockingNo
Oil LeaksNo
Water in OilNo
COOLING SYSTEM
Compression in RadiatorNo
Oil in Anti-FreezeNo
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block HeaterNo
Ether AidNo
Signal LightsNo
TRANSMISSION
Leaks - TRANSMISSIONNo
Transmission - NoisyNo
STEERING
Articulate P & BGood
King PinsGood
Steering CylinderGood
Steering LinkageGood
Tie Rods / Rod EndsGood
Wheel Lean Cylinder - STEERINGGood
BRAKE
Transmission - NoisyThere is a leak in one of the lines can hear air
DRIVECHAIN / TANDEMS
Wheel Lugs & RimsFair
HYDRAULICS
Leaks - HYDRAULICSYes
BLADE
Circle A FrameGood
Face / MoldboardGood
TIRES
Leaks - HYDRAULICS65
Leaks - HYDRAULICS15.5-25 L-2


From the manufacturer:

Supplied by HeavyEquipmentData.com →

Circle
Blade Tip Angle - Front 90.0 deg
Blade Tip Angle - Rear 90.0 deg
Diameter 60.3 in  ( 153 cm )
Max Lift Above Ground 17.3 in  ( 44 cm )
Max Reach Outside Tires - Left 72.1 in  ( 183 cm )
Max Reach Outside Tires - Right 73.7 in  ( 187 cm )
Rotation 360.0 deg
Dimensions
Blade Base 8.5 ft  ( 3 m )
Height to Top of Isomount Cab 11.0 ft  ( 3 m )
Overall Length 27.3 ft  ( 8 m )
Tandem Axle Wheelbase 5.0 ft  ( 2 m )
Wheelbase 19.5 ft  ( 6 m )
Width Over Tires 8.0 ft  ( 2 m )
Engine
Displacement 640.8 cu in  ( 10,501 cu cm )
Max Power 135.0 hp  ( 101 kw )
Net Power Gear 5-6 135.0 hp  ( 101 kw )
Number of Cylinders 6.0
Power Measured @ 2,200.0 rpm
Front Axle
Ground Clearance 2.1 ft  ( 1 m )
Oscillation - Total 32.0 deg
Wheel Lean 18.0 deg
Hydraulic System
Pump Flow 51.0 gpm  ( 193 lpm )
Pump Type closed-center constant-pressure system w/ variable displacement piston
Relief Valve Pressure 2,150.0 psi
Moldboard
Max Depth of Cut 17.8 in  ( 45 cm )
Moldboard Height 24.1 in  ( 61 cm )
Moldboard Thickness 0.9 in  ( 2 cm )
Moldboard Width 12.0 ft  ( 4 m )
Side Shift Left 26.4 in  ( 67 cm )
Side Shift Right 20.5 in  ( 52 cm )
Operating Specifications
Alternator Supplied Amperage 19.0 amps
Cooling System Fluid Capacity 12.5 gal  ( 47 l )
Fuel Capacity 74.8 gal  ( 283 l )
Hydraulic System Fluid Capacity 20.1 gal  ( 76 l )
Max Operation Weight - Front Axle 9,987.0 lbs  ( 4,530 kg )
Max Operation Weight - Rear Axle 21,605.4 lbs  ( 9,800 kg )
Max Operation Weight - Total 31,592.3 lbs  ( 14,330 kg )
Oil System Fluid Capacity 7.7 gal  ( 29 l )
Operating Voltage 24.0 volts
Std Operation Weight - Front Axle 7,870.6 lbs  ( 3,570 kg )
Std Operation Weight - Rear Axle 20,128.3 lbs  ( 9,130 kg )
Std Operation Weight - Total 27,998.8 lbs  ( 12,700 kg )
Tandem Case Fluid Capacity (each) 17.0 gal  ( 64 l )
Transmission Fluid Capacity 23.0 gal  ( 87 l )
Steering System
Articulation Angle 50.0 deg
Turning Radius 24.0 ft  ( 7 m )
Transmission
Max Speed - Forward 25.5 mph  ( 41 kph )
Max Speed - Reverse 25.5 mph  ( 41 kph )
Number of Gears - Forward 6.0
Number of Gears - Reverse 6.0
Transmission Type Cat-built direct drive power shift

Dealer Contact Info:

Carter Machinery

Fax: 540-387-1692



Contact: Tim Eldridge

Click for Phone Number


veritread button