Equipment ↠ Caterpillar ↠ Motor Graders ↠ THIS 2002 Caterpillar 12H VHP PLUS

2002 Caterpillar 12H VHP PLUS

Name: 2002 Caterpillar 12H VHP PLUS
Brand: Caterpillar
Price: 1 USD
Availability: OutOfStock

MACHINE SOLD

Click here to place a bid

Ritchie Bros. Auctioneers

Ritchie Bros. Auctioneers Dealer Info

Ritchie Bros. Auctioneers Website

Click here to email Ritchie Bros. Auctioneers.

Click for Phone Number

Machine Info:

Hours:	14811
Serial Number:	CAT0012HV2WR01205
Machine Location:	AUSTRALIA, AUS

Description:

Enclosed Cab, Air Conditioner, Rear View Camera, Pre-Wired for Grade Control, E-Stops, 14 ft Moldboard, Combination Ripper/Scarifier, 14.00R24 Tires LOCATED-IN-MITTAGONG-NSW - THE CLOSING TIMES OF LOT#'s 277 & 278, ARE TIED TOGETHER. IF A BID IS RECEIVED, THEN A TIME-EXTENSION WILL BE APPLIED TO ALL LOTS. ONCE THE TIME CLOSES, THE HIGH BIDDER ON EACH PIECE WILL BE THE WINNER.

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Circle
Blade Tip Angle - Front	40.0 deg
Blade Tip Angle - Rear	5.0 deg
Diameter	60.2 in ( 153 cm )
Max Lift Above Ground	18.9 in ( 48 cm )
Max Reach Outside Tires - Left	73.6 in ( 187 cm )
Max Reach Outside Tires - Right	71.2 in ( 181 cm )
Rotation	360.0 deg
Shift Left	27.4 in ( 70 cm )
Shift Right	28.7 in ( 73 cm )
Dimensions
Blade Base	8.5 ft ( 3 m )
Front Ground Clearance	2.0 ft ( 1 m )
Height to Top of Isomount Cab	10.3 ft ( 3 m )
Overall Length	28.2 ft ( 9 m )
Rear Ground Clearance	1.2 ft ( 0 m )
Tandem Axle Wheelbase	5.0 ft ( 2 m )
Wheelbase	20.0 ft ( 6 m )
Width Over Tires	8.1 ft ( 2 m )
Engine
Displacement	637.7 cu in ( 10,450 cu cm )
Net Power Gear 1-2	145.0 hp ( 108 kw )
Net Power Gear 4-6	165.0 hp ( 123 kw )
Net Power Gear 5-6	165.0 hp ( 123 kw )
Number of Cylinders	6.0
Power Measured @	2,000.0 rpm
Front Axle
Ground Clearance	2.0 ft ( 1 m )
Oscillation - Total	32.0 deg
Wheel Lean	18.0 deg
Hydraulic System
Relief Valve Pressure	3,500.0 psi
Moldboard
Blade Down Pressure	23,807.8 lbs ( 10,799 kg )
Blade Pull at Max Weight	28,867.0 lbs ( 13,094 kg )
Max Depth of Cut	28.9 in ( 73 cm )
Moldboard Height	24.1 in ( 61 cm )
Moldboard Thickness	0.9 in ( 2 cm )
Moldboard Width	12.1 ft ( 4 m )
Side Shift Left	20.6 in ( 52 cm )
Side Shift Right	26.0 in ( 66 cm )
Operating Specifications
Circle Gearbox Fluid Capacity	1.8 gal ( 7 l )
Cooling System Fluid Capacity	11.6 gal ( 44 l )
Max Operation Weight - Front Axle	13,744.0 lbs ( 6,234 kg )
Max Operation Weight - Rear Axle	32,074.0 lbs ( 14,549 kg )
Max Operation Weight - Total	45,818.0 lbs ( 20,783 kg )
Oil System Fluid Capacity	7.2 gal ( 27 l )
Operating Voltage	24.0 volts
Rear Diff/Final Drive Fluid Capacity	12.2 gal ( 46 l )
Std Operation Weight - Front Axle	8,346.0 lbs ( 3,786 kg )
Std Operation Weight - Rear Axle	22,974.0 lbs ( 10,421 kg )
Tandem Case Fluid Capacity (each)	16.9 gal ( 64 l )
Steering System
Turning Radius	24.3 ft ( 7 m )
Transmission
Number of Gears - Forward	8.0
Number of Gears - Reverse	6.0
Transmission Type	direct drive power shift

Dealer Contact Info:

Ritchie Bros. Auctioneers

Ritchie Bros. Auctioneers Dealer Info

Ritchie Bros. Auctioneers Website

Click here to email Ritchie Bros. Auctioneers.

Contact:

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon