List Your Equipment For Free  /  Seller Login

Caterpillar 12M For Sale in Harrisburg, PA



For Sale: $210,526.00 USD

Apply for Financing

Machine Info:

Hours:6900
Serial Number:N9P00228
Machine Location:HARRISBURG, PA
More Information:https://catused.com/cu/10086205

Description:

12FT MOLDBOARD, Accugrade Ready, AIR CONDITIONING, Air Suspension Seat, AM/FM RADIO, Anti-theft System, AUTO DIFFERENTIAL LOCK, CAT 12M AWD MOTOR GRADER, Circle Clutch, Defroster Fan, Differential Lock, Drive - All Wheel, Ether Aid, Mirrors, Online Owner's Manual , PRODUCT LINK PLE742, Radio - Bluetooth, Rear Window Defrost, REVIEW CAMERA, Rig Saver, Ripper, ROPS - Enclosed

Machine Details:

GENERAL CONDITION
Machine Starts and is OperableYes
S.O.S. (All Compartments)No
Tires are Aired Up and DrivableYes
GENERAL APPEARANCE
Cleaning RequiredYes
SAFETY ITEMS
ROPS Certification PlateYes
Safety Decals In PlaceYes
Safety Decals LegibleYes
OPERATOR STATION
Safety Decals LegibleFull
Safety Decals LegibleFull
ENGINE
Apparent Other Engine DamageNo
Blow ByNo
Fuel LeaksNo
KnockingNo
Oil LeaksNo
Water in OilNo
COOLING SYSTEM
Compression in RadiatorNo
Oil in Anti-FreezeNo
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block HeaterNo
Ether AidYes
Signal LightsYes
TRANSMISSION
Leaks - TRANSMISSIONNo
Transmission - NoisyNo
STEERING
Articulate P & BPoor
King PinsPoor
Tie Rods / Rod EndsFair
Wheel Lean Cylinder - STEERINGGood
BRAKE
AccumulatorsGood
Brake LinkageGood
CompressorGood
Control ValveGood
LinesGood
DRIVECHAIN / TANDEMS
Wheel Lugs & RimsGood
HYDRAULICS
Leaks - HYDRAULICSNo
BLADE
Circle A FrameGood
Face / MoldboardGood
RIPPER
FrameGood
Lines / Fittings - RIPPERGood
TIRES
Leaks - HYDRAULICSFront tires are bald. All four rear tires are about there.


From the manufacturer:

Supplied by HeavyEquipmentData.com →

Blades
Blade Tip Range - Backward 5.0 deg
Blade Tip Range - Forward 40.0 deg
Circle Centershift - Left 25.8 in  ( 66 cm )
Circle Centershift - Right 25.8 in  ( 66 cm )
Maximum Blade Position Angle 90.0 deg
Maximum Depth of Cut 28.3 in  ( 72 cm )
Maximum Lift Above Ground 16.8 in  ( 43 cm )
Maximum Shoulder Reach Outside of Tires - Left 68.6 in  ( 174 cm )
Maximum Shoulder Reach Outside of Tires - Right 75.0 in  ( 191 cm )
Moldboard Sideshift - Left 20.1 in  ( 51 cm )
Moldboard Sideshift - Right 26.0 in  ( 66 cm )
Circle
Blade Tip Angle - Front 40.0 deg
Blade Tip Angle - Rear 5.0 deg
Diameter 60.2 in  ( 153 cm )
Max Lift Above Ground 16.8 in  ( 43 cm )
Max Reach Outside Tires - Left 68.6 in  ( 174 cm )
Max Reach Outside Tires - Right 75.0 in  ( 191 cm )
Shift Left 25.8 in  ( 66 cm )
Shift Right 25.8 in  ( 66 cm )
Dimensions
Blade Base 8.3 ft  ( 3 m )
Front Ground Clearance 1.9 ft  ( 1 m )
Ground Clearance - Rear Axle 13.6 in  ( 35 cm )
Height - Exhaust Stack 112.4 in  ( 286 cm )
Height - Front Axle Center 22.5 in  ( 57 cm )
Height - Top of Cab 10.8 ft  ( 3 m )
Height - Top of Cylinders 113.7 in  ( 289 cm )
Height to Top of Isomount Cab 10.8 ft  ( 3 m )
Length - Between Tandem Axles 59.5 in  ( 151 cm )
Length - Counterweight to Ripper 389.3 in  ( 989 cm )
Length - Front Axle to Mid Tandem 232.8 in  ( 591 cm )
Length - Front Axle to Moldboard 98.9 in  ( 251 cm )
Length - Front Tire to Rear of Machine 334.1 in  ( 849 cm )
Overall Length 27.9 ft  ( 9 m )
Rear Ground Clearance 1.2 ft  ( 0 m )
Tandem Axle Wheelbase 5.0 ft  ( 2 m )
Wheelbase 19.4 ft  ( 6 m )
Width - Outside Front Tires 97.7 in  ( 248 cm )
Width - Outside Rear Tires 97.7 in  ( 248 cm )
Width - Tire Center Lines 84.1 in  ( 214 cm )
Width Over Tires 8.2 ft  ( 3 m )
Engine
Base Power (1st Gear) - Net 158.0 hp  ( 118 kw )
Base Power (All Gears) - Net 158.0 hp  ( 118 kw )
Bore 4.2 in  ( 11 cm )
Derating Altitude 11,500.0 ft  ( 3,505 m )
Displacement 403.0 cu in  ( 6,604 cu cm )
Engine Model Cat C6.6 ACERT VHP
High - Ambient Capability 122.0 deg
Max Power 173.0 hp  ( 129 kw )
Maximum Torque 690.0 lbs ft  ( 936 nm )
Net Power Gear 1-2 163.0 hp  ( 122 kw )
Net Power Gear 4-6 173.0 hp  ( 129 kw )
Net Power Gear 5-6 173.0 hp  ( 129 kw )
Net Power Gears 7-8 173.0 hp  ( 129 kw )
Number of Cylinders 6.0
Power Measured @ 2,000.0 rpm
Standard - Ambient Capability 109.0 deg
Stroke 5.0 in  ( 13 cm )
Torque Rise - V Plus 40%
V Plus Range - Net 118-144 kW (158-193)
V Range - Net 118 -129 kW (158-173)
Frame
Circle - Blade Beam Thickness 1.4 in  ( 4 cm )
Circle - Diameter 60.2 in  ( 153 cm )
Drawbar - Height 6.0 in  ( 15 cm )
Drawbar - Thickness 0.4 in  ( 1 cm )
Drawbar - Width 3.0 in  ( 8 cm )
Front Axle - Height to Center 22.5 in  ( 57 cm )
Front Axle - Total Oscillation per Side 32.0 deg
Front Axle - Wheel Lean - Left/Right 18.0 deg
Front Frame Structure - Height 0.9 ft  ( 0 m )
Front Frame Structure - Width 0.9 ft  ( 0 m )
Front Axle
Ground Clearance 1.9 ft  ( 1 m )
Oscillation - Total 32.0 deg
Wheel Lean 18.0 deg
Hydraulic System
Circuit Type Electro-hydraulic closed center load sensing
Maximum System Pressure 3,500.0 psi
Pump Flow 51.0 gpm  ( 193 lpm )
Pump Output 51.0 gpm  ( 193 lpm )
Pump Type Variable piston
Relief Valve Pressure 3,500.0 psi
Standby Pressure 450.0 psi
Moldboard
Arc Radius 16.3 in  ( 41 cm )
Blade Down Pressure 27,066.2 lbs  ( 12,277 kg )
Blade Down Pressure - Base GVW 17,566.0 lbs  ( 7,968 kg )
Blade Down Pressure - Maximum GVW 28,254.0 lbs  ( 12,816 kg )
Blade Pull - Base GVW 20,830.0 lbs  ( 9,448 kg )
Blade Pull - Maximum GVW 25,862.0 lbs  ( 11,731 kg )
Blade Pull at Max Weight 26,465.0 lbs  ( 12,004 kg )
Blade Width 12.0 ft  ( 4 m )
Cutting Edge Thickness 0.6 in  ( 2 cm )
Cutting Edge Width 6.0 in  ( 15 cm )
End Bit - Thickness 0.6 in  ( 2 cm )
End Bit - Width 6.0 in  ( 15 cm )
Max Depth of Cut 28.3 in  ( 72 cm )
Moldboard - Height 24.0 in  ( 61 cm )
Moldboard - Thickness 0.9 in  ( 2 cm )
Moldboard Height 24.0 in  ( 61 cm )
Moldboard Length 12.0 ft  ( 4 m )
Moldboard Thickness 0.9 in  ( 2 cm )
Moldboard Width 12.0 ft  ( 4 m )
Side Shift Left 20.1 in  ( 51 cm )
Side Shift Right 26.0 in  ( 66 cm )
Throat Clearance 4.9 in  ( 12 cm )
Operating Specifications
Articulation Angle - Left/Right 20.0 deg
Circle Gearbox Fluid Capacity 1.8 gal  ( 7 l )
Cooling System Fluid Capacity 10.4 gal  ( 39 l )
Forward - 1st 2.4 mph  ( 4 kph )
Forward - 2nd 3.3 mph  ( 5 kph )
Forward - 3rd 4.8 mph  ( 8 kph )
Forward - 4th 6.5 mph  ( 10 kph )
Forward - 5th 10.2 mph  ( 16 kph )
Forward - 6th 13.8 mph  ( 22 kph )
Forward - 7th 19.0 mph  ( 31 kph )
Forward - 8th 27.7 mph  ( 45 kph )
Fuel Capacity 90.0 gal  ( 341 l )
Hydraulic System Fluid Capacity 16.0 gal  ( 61 l )
Max Operation Weight - Front Axle 15,284.0 lbs  ( 6,933 kg )
Max Operation Weight - Rear Axle 29,406.0 lbs  ( 13,338 kg )
Max Operation Weight - Total 44,690.0 lbs  ( 20,271 kg )
Operating Weight 32,016.0 lbs  ( 14,522 kg )
Rear Diff/Final Drive Fluid Capacity 13.2 gal  ( 50 l )
Reverse - 1st 2.0
Reverse - 2nd 3.8 mph  ( 6 kph )
Reverse - 3rd 5.6 mph  ( 9 kph )
Reverse - 4th 8.6 mph  ( 14 kph )
Reverse - 5th 16.1 mph  ( 26 kph )
Reverse - 6th 23.5 mph  ( 38 kph )
Std Operation Weight - Front Axle 8,836.0 lbs  ( 4,008 kg )
Std Operation Weight - Rear Axle 23,180.0 lbs  ( 10,514 kg )
Std Operation Weight - Total 32,016.0 lbs  ( 14,522 kg )
Steering Range - Left/Right 47.5 deg
Tandem Case Fluid Capacity (each) 16.9 gal  ( 64 l )
Top Speed - Forward 27.7 mph  ( 45 kph )
Top Speed - Reverse 23.5 mph  ( 38 kph )
Turning Radius - Outside Front Tires 24.5 ft  ( 7 m )
Power Train
Brakes - Parking Multiple oil disc
Brakes - Secondary Dual circuit control system
Brakes - Service Multiple oil-disc
Brakes - Service - Surface Area 3,565.0 cu in  ( 58,420 cu cm )
Forward/Reverse Gears 8 Fwd / 6 Rev
Transmission Direct drive power shift countershaft
Ripper
Machine Length Increase, Beam Raised 39.2 in  ( 100 cm )
Penetration Force 18,911.0 lbs  ( 8,578 kg )
Pry-Out Force 25,972.0 lbs  ( 11,781 kg )
Scarifier
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in  ( 12 cm )
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in  ( 47 cm )
Front, V-Type, 5 or 11 Tooth - Working Width 47.4 in  ( 120 cm )
Mid, Straight - Scarifier Shank Holder Spacing 4.4 in  ( 11 cm )
Mid, Straight - Scarifier Shank Holders 17.0
Mid, Straight - Scarifying Depth, Maximum 12.5 in  ( 32 cm )
Mid, Straight - Working Width 71.0 in  ( 180 cm )
Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in  ( 12 cm )
Mid, V-Type - Scarifier Shank Holders 11.0
Mid, V-Type - Scarifying Depth, Maximum 11.5 in  ( 29 cm )
Mid, V-Type - Working Width 46.6 in  ( 118 cm )
Rear - Scarifier Shank Holder Spacing 10.5 in  ( 27 cm )
Rear - Scarifier Shank Holders 9.0
Rear - Scarifying Depth, Maximum 10.5 in  ( 27 cm )
Rear - Working Width 91.0 in  ( 231 cm )
Service Refill
Circle Drive Housing 1.8 gal  ( 7 l )
Cooling System 10.4 gal  ( 39 l )
Engine Oil 4.1 gal  ( 16 l )
Front Wheel Spindle Bearing Housing 0.1 gal  ( 0 l )
Fuel Capacity 90.0 gal  ( 341 l )
Hydraulic System - Tank 16.0 gal  ( 61 l )
Tandem Housing - Each 16.9 gal  ( 64 l )
Transmission - Differential - Final Drives 13.2 gal  ( 50 l )
Standards
Brakes ISO 3450:1996
ROPS/FOPS ISO 3471:1992 / ISO 3449:1992
Sound ISO 6394:1998 / ISO 6395:1988
Steering ISO 5010:1992
Steering System
Articulation Angle 20.0 deg
Turning Radius 24.5 ft  ( 7 m )
Tandems
Drive Chain Pitch 1.8 in  ( 5 cm )
Height 19.8 in  ( 50 cm )
Sidewall Thickness - Inner 0.5 in  ( 1 cm )
Sidewall Thickness - Outer 0.6 in  ( 2 cm )
Tandem Oscillation - Front Down 25.0 deg
Tandem Oscillation - Front Up 15.0 deg
Wheel Axle Spacing 59.5 in  ( 151 cm )
Width 6.8 in  ( 17 cm )
Transmission
Max Speed - Forward 27.7 mph  ( 45 kph )
Max Speed - Reverse 23.5 mph  ( 38 kph )
Number of Gears - Forward 8.0
Number of Gears - Reverse 6.0
Transmission Type direct drive power shift countershaft
Weights
Gross Vehicle Weight - Base - Front Axle 9,919.0 lbs  ( 4,499 kg )
Gross Vehicle Weight - Base - Rear Axle 23,145.0 lbs  ( 10,498 kg )
Gross Vehicle Weight - Base - Total 33,064.0 lbs  ( 14,998 kg )
Gross Vehicle Weight - Maximum - Front Axle 15,954.0 lbs  ( 7,237 kg )
Gross Vehicle Weight - Maximum - Rear Axle 48,736.0 lbs  ( 22,106 kg )
Gross Vehicle Weight - Maximum - Total 44,690.0 lbs  ( 20,271 kg )

Dealer Contact Info:

Cleveland Brothers

Fax: 717-564-6931



Contact: Erin Westbrook

Click for Phone Number


veritread button





\\ \\ \\