| Blades |
| Blade Tip Range - Backward |
5.0 deg |
| Blade Tip Range - Forward |
40.0 deg |
| Circle Centershift - Left |
25.8 in ( 66 cm ) |
| Circle Centershift - Right |
25.8 in ( 66 cm ) |
| Maximum Blade Position Angle |
90.0 deg |
| Maximum Depth of Cut |
28.3 in ( 72 cm ) |
| Maximum Lift Above Ground |
16.8 in ( 43 cm ) |
| Maximum Shoulder Reach Outside of Tires - Left |
68.6 in ( 174 cm ) |
| Maximum Shoulder Reach Outside of Tires - Right |
75.0 in ( 191 cm ) |
| Moldboard Sideshift - Left |
20.1 in ( 51 cm ) |
| Moldboard Sideshift - Right |
26.0 in ( 66 cm ) |
| Circle |
| Blade Tip Angle - Front |
40.0 deg |
| Blade Tip Angle - Rear |
5.0 deg |
| Diameter |
60.2 in ( 153 cm ) |
| Max Lift Above Ground |
16.8 in ( 43 cm ) |
| Max Reach Outside Tires - Left |
68.6 in ( 174 cm ) |
| Max Reach Outside Tires - Right |
75.0 in ( 191 cm ) |
| Shift Left |
25.8 in ( 66 cm ) |
| Shift Right |
25.8 in ( 66 cm ) |
| Dimensions |
| Blade Base |
8.3 ft ( 3 m ) |
| Front Ground Clearance |
1.9 ft ( 1 m ) |
| Ground Clearance - Rear Axle |
13.6 in ( 35 cm ) |
| Height - Exhaust Stack |
112.4 in ( 286 cm ) |
| Height - Front Axle Center |
22.5 in ( 57 cm ) |
| Height - Top of Cab |
10.8 ft ( 3 m ) |
| Height - Top of Cylinders |
113.7 in ( 289 cm ) |
| Height to Top of Isomount Cab |
10.8 ft ( 3 m ) |
| Length - Between Tandem Axles |
59.5 in ( 151 cm ) |
| Length - Counterweight to Ripper |
389.3 in ( 989 cm ) |
| Length - Front Axle to Mid Tandem |
232.8 in ( 591 cm ) |
| Length - Front Axle to Moldboard |
98.9 in ( 251 cm ) |
| Length - Front Tire to Rear of Machine |
334.1 in ( 849 cm ) |
| Overall Length |
27.9 ft ( 9 m ) |
| Rear Ground Clearance |
1.2 ft ( 0 m ) |
| Tandem Axle Wheelbase |
5.0 ft ( 2 m ) |
| Wheelbase |
19.4 ft ( 6 m ) |
| Width - Outside Front Tires |
97.7 in ( 248 cm ) |
| Width - Outside Rear Tires |
97.7 in ( 248 cm ) |
| Width - Tire Center Lines |
84.1 in ( 214 cm ) |
| Width Over Tires |
8.2 ft ( 3 m ) |
| Engine |
| Base Power (1st Gear) - Net |
158.0 hp ( 118 kw ) |
| Base Power (All Gears) - Net |
158.0 hp ( 118 kw ) |
| Bore |
4.2 in ( 11 cm ) |
| Derating Altitude |
11,500.0 ft ( 3,505 m ) |
| Displacement |
403.0 cu in ( 6,604 cu cm ) |
| Engine Model |
Cat C6.6 ACERT VHP |
| High - Ambient Capability |
122.0 deg |
| Max Power |
173.0 hp ( 129 kw ) |
| Maximum Torque |
690.0 lbs ft ( 936 nm ) |
| Net Power Gear 1-2 |
163.0 hp ( 122 kw ) |
| Net Power Gear 4-6 |
173.0 hp ( 129 kw ) |
| Net Power Gear 5-6 |
173.0 hp ( 129 kw ) |
| Net Power Gears 7-8 |
173.0 hp ( 129 kw ) |
| Number of Cylinders |
6.0 |
| Power Measured @ |
2,000.0 rpm |
| Standard - Ambient Capability |
109.0 deg |
| Stroke |
5.0 in ( 13 cm ) |
| Torque Rise - V Plus |
40% |
| V Plus Range - Net |
118-144 kW (158-193) |
| V Range - Net |
118 -129 kW (158-173) |
| Frame |
| Circle - Blade Beam Thickness |
1.4 in ( 4 cm ) |
| Circle - Diameter |
60.2 in ( 153 cm ) |
| Drawbar - Height |
6.0 in ( 15 cm ) |
| Drawbar - Thickness |
0.4 in ( 1 cm ) |
| Drawbar - Width |
3.0 in ( 8 cm ) |
| Front Axle - Height to Center |
22.5 in ( 57 cm ) |
| Front Axle - Total Oscillation per Side |
32.0 deg |
| Front Axle - Wheel Lean - Left/Right |
18.0 deg |
| Front Frame Structure - Height |
0.9 ft ( 0 m ) |
| Front Frame Structure - Width |
0.9 ft ( 0 m ) |
| Front Axle |
| Ground Clearance |
1.9 ft ( 1 m ) |
| Oscillation - Total |
32.0 deg |
| Wheel Lean |
18.0 deg |
| Hydraulic System |
| Circuit Type |
Electro-hydraulic closed center load sensing |
| Maximum System Pressure |
3,500.0 psi |
| Pump Flow |
51.0 gpm ( 193 lpm ) |
| Pump Output |
51.0 gpm ( 193 lpm ) |
| Pump Type |
Variable piston |
| Relief Valve Pressure |
3,500.0 psi |
| Standby Pressure |
450.0 psi |
| Moldboard |
| Arc Radius |
16.3 in ( 41 cm ) |
| Blade Down Pressure |
27,066.2 lbs ( 12,277 kg ) |
| Blade Down Pressure - Base GVW |
17,566.0 lbs ( 7,968 kg ) |
| Blade Down Pressure - Maximum GVW |
28,254.0 lbs ( 12,816 kg ) |
| Blade Pull - Base GVW |
20,830.0 lbs ( 9,448 kg ) |
| Blade Pull - Maximum GVW |
25,862.0 lbs ( 11,731 kg ) |
| Blade Pull at Max Weight |
26,465.0 lbs ( 12,004 kg ) |
| Blade Width |
12.0 ft ( 4 m ) |
| Cutting Edge Thickness |
0.6 in ( 2 cm ) |
| Cutting Edge Width |
6.0 in ( 15 cm ) |
| End Bit - Thickness |
0.6 in ( 2 cm ) |
| End Bit - Width |
6.0 in ( 15 cm ) |
| Max Depth of Cut |
28.3 in ( 72 cm ) |
| Moldboard - Height |
24.0 in ( 61 cm ) |
| Moldboard - Thickness |
0.9 in ( 2 cm ) |
| Moldboard Height |
24.0 in ( 61 cm ) |
| Moldboard Length |
12.0 ft ( 4 m ) |
| Moldboard Thickness |
0.9 in ( 2 cm ) |
| Moldboard Width |
12.0 ft ( 4 m ) |
| Side Shift Left |
20.1 in ( 51 cm ) |
| Side Shift Right |
26.0 in ( 66 cm ) |
| Throat Clearance |
4.9 in ( 12 cm ) |
| Operating Specifications |
| Articulation Angle - Left/Right |
20.0 deg |
| Circle Gearbox Fluid Capacity |
1.8 gal ( 7 l ) |
| Cooling System Fluid Capacity |
10.4 gal ( 39 l ) |
| Forward - 1st |
2.4 mph ( 4 kph ) |
| Forward - 2nd |
3.3 mph ( 5 kph ) |
| Forward - 3rd |
4.8 mph ( 8 kph ) |
| Forward - 4th |
6.5 mph ( 10 kph ) |
| Forward - 5th |
10.2 mph ( 16 kph ) |
| Forward - 6th |
13.8 mph ( 22 kph ) |
| Forward - 7th |
19.0 mph ( 31 kph ) |
| Forward - 8th |
27.7 mph ( 45 kph ) |
| Fuel Capacity |
90.0 gal ( 341 l ) |
| Hydraulic System Fluid Capacity |
16.0 gal ( 61 l ) |
| Max Operation Weight - Front Axle |
15,284.0 lbs ( 6,933 kg ) |
| Max Operation Weight - Rear Axle |
29,406.0 lbs ( 13,338 kg ) |
| Max Operation Weight - Total |
44,690.0 lbs ( 20,271 kg ) |
| Operating Weight |
32,016.0 lbs ( 14,522 kg ) |
| Rear Diff/Final Drive Fluid Capacity |
13.2 gal ( 50 l ) |
| Reverse - 1st |
2.0 |
| Reverse - 2nd |
3.8 mph ( 6 kph ) |
| Reverse - 3rd |
5.6 mph ( 9 kph ) |
| Reverse - 4th |
8.6 mph ( 14 kph ) |
| Reverse - 5th |
16.1 mph ( 26 kph ) |
| Reverse - 6th |
23.5 mph ( 38 kph ) |
| Std Operation Weight - Front Axle |
8,836.0 lbs ( 4,008 kg ) |
| Std Operation Weight - Rear Axle |
23,180.0 lbs ( 10,514 kg ) |
| Std Operation Weight - Total |
32,016.0 lbs ( 14,522 kg ) |
| Steering Range - Left/Right |
47.5 deg |
| Tandem Case Fluid Capacity (each) |
16.9 gal ( 64 l ) |
| Top Speed - Forward |
27.7 mph ( 45 kph ) |
| Top Speed - Reverse |
23.5 mph ( 38 kph ) |
| Turning Radius - Outside Front Tires |
24.5 ft ( 7 m ) |
| Power Train |
| Brakes - Parking |
Multiple oil disc |
| Brakes - Secondary |
Dual circuit control system |
| Brakes - Service |
Multiple oil-disc |
| Brakes - Service - Surface Area |
3,565.0 cu in ( 58,420 cu cm ) |
| Forward/Reverse Gears |
8 Fwd / 6 Rev |
| Transmission |
Direct drive power shift countershaft |
| Ripper |
| Machine Length Increase, Beam Raised |
39.2 in ( 100 cm ) |
| Penetration Force |
18,911.0 lbs ( 8,578 kg ) |
| Pry-Out Force |
25,972.0 lbs ( 11,781 kg ) |
| Scarifier |
| Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing |
4.6 in ( 12 cm ) |
| Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum |
18.4 in ( 47 cm ) |
| Front, V-Type, 5 or 11 Tooth - Working Width |
47.4 in ( 120 cm ) |
| Mid, Straight - Scarifier Shank Holder Spacing |
4.4 in ( 11 cm ) |
| Mid, Straight - Scarifier Shank Holders |
17.0 |
| Mid, Straight - Scarifying Depth, Maximum |
12.5 in ( 32 cm ) |
| Mid, Straight - Working Width |
71.0 in ( 180 cm ) |
| Mid, V-Type - Scarifier Shank Holder Spacing |
4.6 in ( 12 cm ) |
| Mid, V-Type - Scarifier Shank Holders |
11.0 |
| Mid, V-Type - Scarifying Depth, Maximum |
11.5 in ( 29 cm ) |
| Mid, V-Type - Working Width |
46.6 in ( 118 cm ) |
| Rear - Scarifier Shank Holder Spacing |
10.5 in ( 27 cm ) |
| Rear - Scarifier Shank Holders |
9.0 |
| Rear - Scarifying Depth, Maximum |
10.5 in ( 27 cm ) |
| Rear - Working Width |
91.0 in ( 231 cm ) |
| Service Refill |
| Circle Drive Housing |
1.8 gal ( 7 l ) |
| Cooling System |
10.4 gal ( 39 l ) |
| Engine Oil |
4.1 gal ( 16 l ) |
| Front Wheel Spindle Bearing Housing |
0.1 gal ( 0 l ) |
| Fuel Capacity |
90.0 gal ( 341 l ) |
| Hydraulic System - Tank |
16.0 gal ( 61 l ) |
| Tandem Housing - Each |
16.9 gal ( 64 l ) |
| Transmission - Differential - Final Drives |
13.2 gal ( 50 l ) |
| Standards |
| Brakes |
ISO 3450:1996 |
| ROPS/FOPS |
ISO 3471:1992 / ISO 3449:1992 |
| Sound |
ISO 6394:1998 / ISO 6395:1988 |
| Steering |
ISO 5010:1992 |
| Steering System |
| Articulation Angle |
20.0 deg |
| Turning Radius |
24.5 ft ( 7 m ) |
| Tandems |
| Drive Chain Pitch |
1.8 in ( 5 cm ) |
| Height |
19.8 in ( 50 cm ) |
| Sidewall Thickness - Inner |
0.5 in ( 1 cm ) |
| Sidewall Thickness - Outer |
0.6 in ( 2 cm ) |
| Tandem Oscillation - Front Down |
25.0 deg |
| Tandem Oscillation - Front Up |
15.0 deg |
| Wheel Axle Spacing |
59.5 in ( 151 cm ) |
| Width |
6.8 in ( 17 cm ) |
| Transmission |
| Max Speed - Forward |
27.7 mph ( 45 kph ) |
| Max Speed - Reverse |
23.5 mph ( 38 kph ) |
| Number of Gears - Forward |
8.0 |
| Number of Gears - Reverse |
6.0 |
| Transmission Type |
direct drive power shift countershaft |
| Weights |
| Gross Vehicle Weight - Base - Front Axle |
9,919.0 lbs ( 4,499 kg ) |
| Gross Vehicle Weight - Base - Rear Axle |
23,145.0 lbs ( 10,498 kg ) |
| Gross Vehicle Weight - Base - Total |
33,064.0 lbs ( 14,998 kg ) |
| Gross Vehicle Weight - Maximum - Front Axle |
15,954.0 lbs ( 7,237 kg ) |
| Gross Vehicle Weight - Maximum - Rear Axle |
48,736.0 lbs ( 22,106 kg ) |
| Gross Vehicle Weight - Maximum - Total |
44,690.0 lbs ( 20,271 kg ) |
