List Your Equipment For Free  /  Seller Login

Caterpillar 140M For Sale in Fargo, ND



For Sale: $115,000.00 USD

Apply for Financing

Machine Info:

Hours:8145
Serial Number:B9M00655
Machine Location:FARGO, ND
More Information:https://catused.com/cu/10127326

Description:

2009 CAT 140M MOTOR GRADER, Anti-theft System, Arrangement, Snow, AUTO DIFFERENTIAL LOCK, BLADE, 14' X 27" X 1", Circle Clutch, CONVERTER, COMMUNICATION (CB), COVER, HYDRAULIC OIL COOLER, CUTTING EDGE, 14' BLADE, DOOR, CAB, RIGHT HAND SIDE, DRAIN, ECOLOGY, ENGINE GRAVITY, END BITS, STANDARD, Fenders, FILM, ENGINE, VHP PLUS, GUARD, DEBRIS, HIGH PROFILE EROPS W/HEAT & A/C, HYDRAULICS, BASE & 3 FUNCTIONS, LADDER, CAB, RIGHT HAND SIDE, LANGUAGE, ENGLISH, LIFT GROUP, LIGHT, CAB, SNOW WING, RH 3X3, LIGHTS, RIPPER 3X3, LIGHTS, ROAD 3 X 3, LIGHTS, WORK, HEEL 3X3, LINES,STANDARD W/O ACCUMULATOR, MICHELIN 14.0R24 @ 90%, MOUNTING, FRONT LIFT, MOUNTING, SNOW WING, NO COMPRESSOR, OIL, HYDRAULIC,ARCTIC, Online Owner's Manual , PRECLEANER, SY-KLONE, PRODUCT LINK, PL321, RADIO READY, ENTERTAINMENT, RADIO, 12V, AM/FM WEATHERBAND, Rear Window Defrost, Ripper, SEAT, AIR SUSPENSION, CLOTH, SHADE, SUN, Snow Wing, Steering Type - Joystick, Supplemental Steering, TANK, FUEL, STANDARD, Throttle Lock

Machine Details:

GENERAL CONDITION
Machine Starts and is OperableYes
S.O.S. (All Compartments)Yes
Tires are Aired Up and DrivableYes
GENERAL APPEARANCE
Cleaning RequiredNo
SAFETY ITEMS
ROPS Certification PlateYes
Safety Decals In PlaceYes
Safety Decals LegibleYes
OPERATOR STATION
Current O&MMYes
Current Parts ManualYes
Current Safety ManualYes
ENGINE
Apparent Other Engine DamageNo
Blow ByNo
Fuel LeaksNo
KnockingNo
Oil LeaksNo
Water in OilNo
COOLING SYSTEM
Compression in RadiatorNo
Oil in Anti-FreezeNo
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block HeaterYes
Ether AidYes
Signal LightsYes
TRANSMISSION
Leaks - TRANSMISSIONNo
Transmission - NoisyNo
STEERING
Articulate P & BGood
King PinsGood
Steering CylinderGood
Steering LinkageGood
Tie Rods / Rod EndsGood
Wheel Lean Cylinder - STEERINGGood
BRAKE
AccumulatorsGood
Brake LinkageGood
CompressorGood
Control ValveGood
LinesGood
DRIVECHAIN / TANDEMS
Wheel Lugs & RimsGood
HYDRAULICS
Leaks - HYDRAULICSNo
BLADE
Circle A FrameGood
Face / MoldboardGood
RIPPER
FrameGood
Lines / Fittings - RIPPERGood
SNOW WING
Cylinder ConditionGood
Operating Condition - SNOW WINGFair


From the manufacturer:

Supplied by HeavyEquipmentData.com →

Blades
Blade Tip Range - Backward 5.0 deg
Blade Tip Range - Forward 40.0 deg
Circle Centershift - Left 27.4 in  ( 70 cm )
Circle Centershift - Right 28.7 in  ( 73 cm )
Maximum Blade Position Angle 90.0 deg
Maximum Depth of Cut 28.1 in  ( 71 cm )
Maximum Lift Above Ground 18.9 in  ( 48 cm )
Maximum Shoulder Reach Outside of Tires - Left 70.5 in  ( 179 cm )
Maximum Shoulder Reach Outside of Tires - Right 77.9 in  ( 198 cm )
Moldboard Sideshift - Left 20.1 in  ( 51 cm )
Moldboard Sideshift - Right 26.0 in  ( 66 cm )
Circle
Blade Tip Angle - Front 40.0 deg
Blade Tip Angle - Rear 5.0 deg
Diameter 60.2 in  ( 153 cm )
Max Reach Outside Tires - Left 70.5 in  ( 179 cm )
Max Reach Outside Tires - Right 77.9 in  ( 198 cm )
Shift Left 27.4 in  ( 70 cm )
Shift Right 28.7 in  ( 73 cm )
Dimensions
Blade Base 8.4 ft  ( 3 m )
Front Ground Clearance 1.9 ft  ( 1 m )
Ground Clearance - Rear Axle 13.3 in  ( 34 cm )
Height - Exhaust Stack 121.0 in  ( 307 cm )
Height - Front Axle Center 23.5 in  ( 60 cm )
Height - Top of Cab 130.0 ft  ( 40 m )
Height - Top of Cylinders 119.0 in  ( 302 cm )
Height to Top of Isomount Cab 10.8 ft  ( 3 m )
Length - Between Tandem Axles 60.0 in  ( 152 cm )
Length - Front Axle to Mid Tandem 241.0 in  ( 612 cm )
Length - Front Axle to Moldboard 100.0 in  ( 254 cm )
Length - Front Tire to Rear of Machine 344.0 in  ( 874 cm )
Overall Length 28.6 ft  ( 9 m )
Rear Ground Clearance 1.2 ft  ( 0 m )
Tandem Axle Wheelbase 5.0 ft  ( 2 m )
Wheelbase 20.1 ft  ( 6 m )
Width - Outside Front Tires 98.0 in  ( 249 cm )
Width - Outside Rear Tires 98.0 in  ( 249 cm )
Width - Tire Center Lines 84.0 in  ( 213 cm )
Width Over Tires 8.2 ft  ( 3 m )
Engine
Base Power (1st Gear) - Net 183.0 hp  ( 136 kw )
Base Power (1st Gear) - Net - Metric 186.0 hp  ( 139 kw )
Bore 4.3 in  ( 11 cm )
Derating Altitude 10,000.0 ft  ( 3,048 m )
Displacement 439.0 cu in  ( 7,194 cu cm )
Emissions Emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Engine Model Cat C7 ACERT
High - Ambient Capability 122.0 deg
High Ambient - Fan Speed - Maximum 1,650.0 rpm
High Ambient - Fan Speed - Minimum 600.0 rpm
Max Power 183.0 hp  ( 136 kw )
Net Power Gears 7-8 183.0 hp  ( 136 kw )
Number of Cylinders 6.0
Power Measured @ 2,000.0 rpm
Speed at Rated Power 2,000.0 rpm
Standard - Ambient Capability 109.0 deg
Standard - Fan Speed - Maximum 1,450.0 rpm
Standard - Fan Speed - Minimum 600.0 rpm
Stroke 5.0 in  ( 13 cm )
Torque Rise - V Plus 39%
V Plus Range - Net 136-174 kW (183-233)
V Plus Range - Net - Metric 136-174 kW (186-237)
Frame
Circle - Blade Beam Thickness 1.6 in  ( 4 cm )
Circle - Diameter 60.2 in  ( 153 cm )
Drawbar - Height 6.0 in  ( 15 cm )
Drawbar - Width 3.0 in  ( 8 cm )
Front Axle - Height to Center 23.0 in  ( 58 cm )
Front Axle - Total Oscillation per Side 32.0 deg
Front Axle - Wheel Lean - Left/Right 18.0 deg
Front Frame Structure - Height 12.0 ft  ( 4 m )
Front Frame Structure - Width 12.0 ft  ( 4 m )
Front Axle
Ground Clearance 1.9 ft  ( 1 m )
Oscillation - Total 32.0 deg
Wheel Lean 18.0 deg
Hydraulic System
Circuit Type Electro-hydraulic load sensing closed center
Maximum System Pressure 3,500.0 psi
Pump Flow 55.7 gpm  ( 211 lpm )
Pump Output 55.7 gpm  ( 211 lpm )
Pump Type Variable piston
Relief Valve Pressure 3,500.0 psi
Standby Pressure 450.0 psi
Moldboard
Arc Radius 16.3 in  ( 41 cm )
Blade Pull - Base GVW 24,294.0 lbs  ( 11,020 kg )
Blade Pull - Maximum GVW 31,758.0 lbs  ( 14,405 kg )
Blade Pull at Max Weight 45,787.8 lbs  ( 20,769 kg )
Blade Width 12.0 ft  ( 4 m )
Cutting Edge Thickness 0.6 in  ( 2 cm )
Cutting Edge Width 6.0 in  ( 15 cm )
End Bit - Thickness 0.6 in  ( 2 cm )
End Bit - Width 6.0 in  ( 15 cm )
Max Depth of Cut 28.1 in  ( 71 cm )
Moldboard - Height 24.0 in  ( 61 cm )
Moldboard - Thickness 0.9 in  ( 2 cm )
Moldboard - Width 12.0 ft  ( 4 m )
Moldboard Height 24.0 in  ( 61 cm )
Moldboard Length 12.0 ft  ( 4 m )
Moldboard Thickness 0.9 in  ( 2 cm )
Moldboard Width 12.0 ft  ( 4 m )
Side Shift Left 20.1 in  ( 51 cm )
Side Shift Right 26.0 in  ( 66 cm )
Throat Clearance 6.5 in  ( 17 cm )
Operating Specifications
Articulation Angle - Left/Right 20.0 deg
Circle Gearbox Fluid Capacity 1.8 gal  ( 7 l )
Cooling System Fluid Capacity 12.4 gal  ( 47 l )
Forward - 1st 2.5 mph  ( 4 kph )
Forward - 2nd 3.4 mph  ( 5 kph )
Forward - 3rd 5.0 mph  ( 8 kph )
Forward - 4th 6.8 mph  ( 11 kph )
Forward - 5th 10.6 mph  ( 17 kph )
Forward - 6th 14.5 mph  ( 23 kph )
Forward - 7th 19.9 mph  ( 32 kph )
Forward - 8th 29.0 mph  ( 47 kph )
Fuel Capacity 110.0 gal  ( 416 l )
Hydraulic System Fluid Capacity 15.9 gal  ( 60 l )
Max Operation Weight - Front Axle 17,908.0 lbs  ( 8,123 kg )
Max Operation Weight - Rear Axle 32,967.0 lbs  ( 14,954 kg )
Max Operation Weight - Total 50,875.0 lbs  ( 23,077 kg )
Operating Weight 33,356.0 lbs  ( 15,130 kg )
Rear Diff/Final Drive Fluid Capacity 17.2 gal  ( 65 l )
Reverse - 1st 2.0
Reverse - 2nd 3.7 mph  ( 6 kph )
Reverse - 3rd 5.4 mph  ( 9 kph )
Reverse - 4th 8.4 mph  ( 14 kph )
Reverse - 5th 15.7 mph  ( 25 kph )
Reverse - 6th 22.9 mph  ( 37 kph )
Std Operation Weight - Front Axle 9,173.0 lbs  ( 4,161 kg )
Std Operation Weight - Rear Axle 24,183.0 lbs  ( 10,969 kg )
Std Operation Weight - Total 33,356.0 lbs  ( 15,130 kg )
Steering Range - Left/Right 47.5 deg
Tandem Case Fluid Capacity (each) 16.9 gal  ( 64 l )
Top Speed - Forward 29.0 mph  ( 47 kph )
Top Speed - Reverse 22.9 mph  ( 37 kph )
Turning Radius - Outside Front Tires 25.0 ft  ( 8 m )
Power Train
Brakes - Parking Multiple oil disc
Brakes - Secondary Dual circuit control system
Brakes - Service Multiple oil disc
Brakes - Service - Surface Area 3,565.0 cu in  ( 58,420 cu cm )
Forward/Reverse Gears 8 Forward/6 Reverse
Transmission Direct drive power shift countershaft
Ripper
Machine Length Increase, Beam Raised 36.2 in  ( 92 cm )
Penetration Force 20,540.0 lbs  ( 9,317 kg )
Pry-Out Force 26,259.0 lbs  ( 11,911 kg )
Ripper Shank Holder Spacing 21.0 in  ( 53 cm )
Ripper Shank Holders 5.0
Ripping Depth - Maximum 16.8 in  ( 43 cm )
Scarifier
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in  ( 12 cm )
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in  ( 47 cm )
Front, V-Type, 5 or 11 Tooth - Working Width 47.4 in  ( 120 cm )
Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in  ( 12 cm )
Mid, V-Type - Scarifier Shank Holders 11.0
Mid, V-Type - Scarifying Depth, Maximum 11.5 in  ( 29 cm )
Mid, V-Type - Working Width 46.6 in  ( 118 cm )
Rear - Scarifier Shank Holder Spacing 10.5 in  ( 27 cm )
Rear - Scarifier Shank Holders 9.0
Rear - Scarifying Depth, Maximum 10.5 in  ( 27 cm )
Rear - Working Width 91.0 in  ( 231 cm )
Service Refill
Circle Drive Housing 1.8 gal  ( 7 l )
Cooling System 10.6 gal  ( 40 l )
Engine Oil 6.6 gal  ( 25 l )
Front Wheel Spindle Bearing Housing 0.2 gal  ( 1 l )
Fuel Capacity 110.0 gal  ( 416 l )
Hydraulic System - Tank 16.9 gal  ( 64 l )
Tandem Housing - Each 16.9 gal  ( 64 l )
Transmission - Differential - Final Drives 16.9 gal  ( 64 l )
Standards
Brakes ISO 3450:1996
ROPS/FOPS ISO 3471:2008 ISO 3449:2005 Level II
Sound ISO 6394:2008 ISO 6395:2008
Steering ISO 5010:2007
Steering System
Articulation Angle 20.0 deg
Turning Radius 25.5 ft  ( 8 m )
Tandems
Drive Chain Pitch 2.0 in  ( 5 cm )
Height 19.9 in  ( 51 cm )
Sidewall Thickness - Inner 0.6 in  ( 2 cm )
Sidewall Thickness - Outer 0.7 in  ( 2 cm )
Tandem Oscillation - Front Down 25.0 deg
Tandem Oscillation - Front Up 15.0 deg
Wheel Axle Spacing 60.0 in  ( 152 cm )
Width 7.9 in  ( 20 cm )
Transmission
Max Speed - Forward 29.0 mph  ( 47 kph )
Max Speed - Reverse 22.9 mph  ( 37 kph )
Number of Gears - Forward 8.0
Number of Gears - Reverse 6.0
Transmission Type direct drive power shift countershaft
Weights
Gross Vehicle Weight - Base - Front Axle 9,561.0 lbs  ( 4,337 kg )
Gross Vehicle Weight - Base - Rear Axle 26,993.0 lbs  ( 12,244 kg )
Gross Vehicle Weight - Base - Total 36,554.0 lbs  ( 16,581 kg )
Gross Vehicle Weight - Maximum - Front Axle 16,606.0 lbs  ( 7,532 kg )
Gross Vehicle Weight - Maximum - Rear Axle 35,287.0 lbs  ( 16,006 kg )
Gross Vehicle Weight - Maximum - Total 51,893.0 lbs  ( 23,538 kg )
Gross Vehicle Weight - Typically Equipped 41,868.0 lbs  ( 18,991 kg )
Gross Vehicle Weight - Typically Equipped - Front Axle 11,716.0 lbs  ( 5,314 kg )
Gross Vehicle Weight - Typically Equipped - Total 41,868.0 lbs  ( 18,991 kg )
Operating Weight - Typically Equipped 41,868.0 lbs  ( 18,991 kg )

Dealer Contact Info:

Butler Machinery

Fax: 701-298-1810



Contact: Bill Bauer

Click for Phone Number


veritread button





39.96118 (ip) \\ -82.99879 (ip) \\ Columbus (ip) \\ OH (ip)