| Blades |
| Blade Tip Range - Backward |
5.0 deg |
| Blade Tip Range - Forward |
40.0 deg |
| Circle Centershift - Left |
27.4 in ( 70 cm ) |
| Circle Centershift - Right |
28.7 in ( 73 cm ) |
| Maximum Blade Position Angle |
90.0 deg |
| Maximum Depth of Cut |
29.5 in ( 75 cm ) |
| Maximum Lift Above Ground |
17.8 in ( 45 cm ) |
| Maximum Shoulder Reach Outside of Tires - Left |
82.3 in ( 209 cm ) |
| Maximum Shoulder Reach Outside of Tires - Right |
89.7 in ( 228 cm ) |
| Moldboard Sideshift - Left |
20.1 in ( 51 cm ) |
| Moldboard Sideshift - Right |
26.0 in ( 66 cm ) |
| Circle |
| Blade Tip Angle - Front |
40.0 deg |
| Blade Tip Angle - Rear |
5.0 deg |
| Diameter |
60.3 in ( 153 cm ) |
| Max Lift Above Ground |
17.8 in ( 45 cm ) |
| Max Reach Outside Tires - Left |
82.3 in ( 209 cm ) |
| Max Reach Outside Tires - Right |
89.7 in ( 228 cm ) |
| Rotation |
360.0 deg |
| Shift Left |
27.4 in ( 70 cm ) |
| Shift Right |
28.7 in ( 73 cm ) |
| Dimensions |
| Blade Base |
8.4 ft ( 3 m ) |
| Front Ground Clearance |
2.0 ft ( 1 m ) |
| Height to Top of Isomount Cab |
10.8 ft ( 3 m ) |
| Overall Length |
29.2 ft ( 9 m ) |
| Rear Ground Clearance |
1.2 ft ( 0 m ) |
| Tandem Axle Wheelbase |
5.0 ft ( 2 m ) |
| Wheelbase |
20.1 ft ( 6 m ) |
| Width Over Tires |
8.5 ft ( 3 m ) |
| Engine |
| Base Power (1st Gear) - Net |
213.0 hp ( 159 kw ) |
| Base Power (1st Gear) - Net - Metric |
216.0 hp ( 161 kw ) |
| Base Power (All Gears) - Net |
213.0 hp ( 159 kw ) |
| Bore |
4.5 in ( 11 cm ) |
| Derating Altitude |
10,000.0 ft ( 3,048 m ) |
| Emissions |
U.S. Tier 4 Interim/EU Stage IIIB |
| Engine Model |
Cat C9.3 ACERT |
| High - Ambient Capability |
122.0 deg |
| High Ambient - Fan Speed - Maximum |
1,550.0 rpm |
| High Ambient - Fan Speed - Minimum |
500.0 rpm |
| High Ambient - Fan Speed - Standard |
1,400.0 rpm |
| Maximum Torque |
1,000.0 lbs ft ( 1,356 nm ) |
| Net Torque Gears 7-8 |
1,000.0 lbs ft ( 1,356 nm ) |
| Number of Cylinders |
6.0 |
| Power Measured @ |
2,100.0 rpm |
| Speed at Rated Power |
2,100.0 rpm |
| Standard Capability |
109.0 deg |
| Stroke |
5.9 in ( 15 cm ) |
| Torque Measured @ |
2,100.0 rpm |
| V Plus - Gear 1F, Net |
213.0 hp ( 159 kw ) |
| V Plus - Gear 2F, Net |
223.0 hp ( 166 kw ) |
| V Plus - Gear 3F, Net |
233.0 hp ( 174 kw ) |
| V Plus - Gear 4F, Net |
243.0 hp ( 181 kw ) |
| V Plus - Gear 5F, Net |
248.0 hp ( 185 kw ) |
| V Plus - Gear 6F, Net |
253.0 hp ( 189 kw ) |
| V Plus - Gear 7F, Net |
258.0 hp ( 192 kw ) |
| V Plus - Gear 8F, Net |
263.0 hp ( 196 kw ) |
| V Plus Range - Net |
159-196 kW (213-263) |
| V Plus Range - Net - Metric |
159-196 kW (216-267) |
| Frame |
| Circle - Blade Beam Thickness |
1.6 in ( 4 cm ) |
| Circle - Diameter |
60.2 in ( 153 cm ) |
| Drawbar - Height |
6.0 in ( 15 cm ) |
| Drawbar - Thickness |
0.5 in ( 1 cm ) |
| Drawbar - Width |
3.0 in ( 8 cm ) |
| Front Axle - Height to Center |
23.6 in ( 60 cm ) |
| Front Axle - Total Oscillation per Side |
32.0 deg |
| Front Axle - Wheel Lean - Left/Right |
18.0 deg |
| Front Frame Structure - Height |
1.1 ft ( 0 m ) |
| Front Frame Structure - Width |
0.9 ft ( 0 m ) |
| Front-Top/Bottom Plate - Thickness |
0.9 in ( 2 cm ) |
| Front-Top/Bottom Plate - Width |
12.0 in ( 30 cm ) |
| Front Axle |
| Ground Clearance |
2.0 ft ( 1 m ) |
| Oscillation - Total |
32.0 deg |
| Wheel Lean |
18.0 deg |
| Hydraulic System |
| Circuit Type |
Parallel |
| Maximum System Pressure |
3,503.0 psi |
| Pump Flow |
55.5 gpm ( 210 lpm ) |
| Pump Output |
55.5 gpm ( 210 lpm ) |
| Pump Type |
Variable Piston |
| Relief Valve Pressure |
3,503.0 psi |
| Reservoir Tank Capacity |
15.9 gal ( 60 l ) |
| Standby Pressure |
609.0 psi |
| Moldboard |
| Arc Radius |
16.3 in ( 41 cm ) |
| Blade Down Pressure |
22,884.0 lbs ( 10,380 kg ) |
| Blade Down Pressure - Base GVW |
17,171.0 lbs ( 7,789 kg ) |
| Blade Down Pressure - Maximum GVW |
29,195.0 lbs ( 13,243 kg ) |
| Blade Pull - Base GVW |
25,908.0 lbs ( 11,752 kg ) |
| Blade Pull - Maximum GVW |
34,072.0 lbs ( 15,455 kg ) |
| Blade Pull at Max Weight |
20,044.0 lbs ( 9,092 kg ) |
| Blade Width |
14.0 ft ( 4 m ) |
| Cutting Edge Thickness |
0.6 in ( 2 cm ) |
| Cutting Edge Width |
6.0 in ( 15 cm ) |
| End Bit - Thickness |
0.6 in ( 2 cm ) |
| End Bit - Width |
6.0 in ( 15 cm ) |
| Max Depth of Cut |
29.6 in ( 75 cm ) |
| Moldboard - Height |
24.0 in ( 61 cm ) |
| Moldboard - Thickness |
0.9 in ( 2 cm ) |
| Moldboard Height |
24.0 in ( 61 cm ) |
| Moldboard Thickness |
0.9 in ( 2 cm ) |
| Moldboard Width |
14.0 ft ( 4 m ) |
| Side Shift Left |
20.1 in ( 51 cm ) |
| Side Shift Right |
26.0 in ( 66 cm ) |
| Throat Clearance |
6.5 in ( 17 cm ) |
| Operating Specifications |
| Alternator Supplied Amperage |
150.0 amps |
| Articulation Angle - Left/Right |
20.0 deg |
| Circle Gearbox Fluid Capacity |
1.8 gal ( 7 l ) |
| Cooling System Fluid Capacity |
14.8 gal ( 56 l ) |
| Forward - 1st |
2.6 mph ( 4 kph ) |
| Forward - 2nd |
3.5 mph ( 6 kph ) |
| Forward - 3rd |
5.1 mph ( 8 kph ) |
| Forward - 4th |
7.0 mph ( 11 kph ) |
| Forward - 5th |
10.8 mph ( 17 kph ) |
| Forward - 6th |
14.7 mph ( 24 kph ) |
| Forward - 7th |
20.3 mph ( 33 kph ) |
| Forward - 8th |
29.5 mph ( 47 kph ) |
| Fuel Capacity |
110.0 gal ( 416 l ) |
| Hydraulic System Fluid Capacity |
26.4 gal ( 100 l ) |
| Max Operation Weight - Front Axle |
13,343.0 lbs ( 6,052 kg ) |
| Max Operation Weight - Rear Axle |
36,444.0 lbs ( 16,531 kg ) |
| Max Operation Weight - Total |
52,795.0 lbs ( 23,947 kg ) |
| Oil System Fluid Capacity |
7.9 gal ( 30 l ) |
| Operating Voltage |
24.0 volts |
| Reverse - 1st |
2.0 |
| Reverse - 2nd |
3.8 mph ( 6 kph ) |
| Reverse - 3rd |
5.5 mph ( 9 kph ) |
| Reverse - 4th |
8.5 mph ( 14 kph ) |
| Reverse - 5th |
16.0 mph ( 26 kph ) |
| Reverse - 6th |
23.3 mph ( 38 kph ) |
| Steering Range - Left/Right |
47.5 deg |
| Tandem Case Fluid Capacity (each) |
16.9 gal ( 64 l ) |
| Top Speed - Forward |
29.5 mph ( 47 kph ) |
| Top Speed - Reverse |
23.3 mph ( 38 kph ) |
| Transmission Fluid Capacity |
17.2 gal ( 65 l ) |
| Turning Radius - Outside Front Tires |
25.0 ft ( 8 m ) |
| Power Train |
| Brakes - Parking |
Multiple Oil Disc |
| Brakes - Secondary |
Dual Circuit Control |
| Brakes - Service |
Multiple Oil Disc |
| Brakes - Service - Surface Area |
3,565.0 cu in ( 58,420 cu cm ) |
| Forward/Reverse Gears |
8 Fwd/6 Rev |
| Transmission |
Direct Drive Powershift |
| Ripper |
| Machine Length Increase, Beam Raised |
40.6 in ( 103 cm ) |
| Penetration Force |
20,443.0 lbs ( 9,273 kg ) |
| Pry-Out Force |
258,201.0 lbs ( 117,118 kg ) |
| Ripper Shank Holder Spacing |
21.0 in ( 53 cm ) |
| Ripper Shank Holders |
5.0 |
| Ripping Depth - Maximum |
16.8 in ( 43 cm ) |
| Scarifier |
| Front, V-Type - Scarifier Shank Holder Spacing |
18.4 in ( 47 cm ) |
| Front, V-Type - Scarifying Depth, Maximum |
40.6 in ( 103 cm ) |
| Front, V-Type - Working Width |
47.4 in ( 120 cm ) |
| Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing |
4.6 in ( 12 cm ) |
| Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum |
18.4 in ( 47 cm ) |
| Front, V-Type, 5 or 11 Tooth - Working Width |
40.6 in ( 103 cm ) |
| Mid, Straight - Scarifier Shank Holder Spacing |
4.4 in ( 11 cm ) |
| Mid, Straight - Scarifier Shank Holders |
17.0 |
| Mid, Straight - Scarifying Depth, Maximum |
12.5 in ( 32 cm ) |
| Mid, Straight - Working Width |
70.9 in ( 180 cm ) |
| Mid, V-Type - Scarifier Shank Holder Spacing |
4.6 in ( 12 cm ) |
| Mid, V-Type - Scarifier Shank Holders |
11.0 |
| Mid, V-Type - Scarifying Depth, Maximum |
11.5 in ( 29 cm ) |
| Mid, V-Type - Working Width |
46.6 in ( 118 cm ) |
| Rear - Scarifier Shank Holder Spacing |
10.5 in ( 27 cm ) |
| Rear - Scarifier Shank Holders |
9.0 |
| Rear - Scarifying Depth, Maximum |
16.8 in ( 43 cm ) |
| Rear - Working Width |
84.0 in ( 213 cm ) |
| Service Refill |
| Circle Drive Housing |
1.8 gal ( 7 l ) |
| Cooling System |
14.8 gal ( 56 l ) |
| Engine Oil |
7.9 gal ( 30 l ) |
| Front Wheel Spindle Bearing Housing |
0.2 gal ( 1 l ) |
| Fuel Capacity |
110.0 gal ( 416 l ) |
| Hydraulic System - Tank |
16.9 gal ( 64 l ) |
| Hydraulic System - Total |
26.4 gal ( 100 l ) |
| Tandem Housing - Each |
16.9 gal ( 64 l ) |
| Transmission - Differential - Final Drives |
17.2 gal ( 65 l ) |
| Standards |
| Brakes |
ISO 3450 ISO 10265 |
| ROPS/FOPS |
ISO 3471/ISO 3499 |
| Sound |
ISO 6394; ISO 6395 |
| Steering |
ISO 5010 |
| Steering System |
| Articulation Angle |
20.0 deg |
| Turning Radius |
25.5 ft ( 8 m ) |
| Tandems |
| Drive Chain Pitch |
2.0 in ( 5 cm ) |
| Height |
19.9 in ( 51 cm ) |
| Sidewall Thickness - Inner |
0.7 in ( 2 cm ) |
| Sidewall Thickness - Outer |
0.8 in ( 2 cm ) |
| Tandem Oscillation - Front Down |
25.0 deg |
| Tandem Oscillation - Front Up |
15.0 deg |
| Wheel Axle Spacing |
60.0 in ( 152 cm ) |
| Width |
8.3 in ( 21 cm ) |
| Transmission |
| Max Speed - Forward |
29.0 mph ( 47 kph ) |
| Max Speed - Reverse |
22.9 mph ( 37 kph ) |
| Number of Gears - Forward |
8.0 |
| Number of Gears - Reverse |
6.0 |
| Transmission Type |
Direct Drive Powershift |
| Weights |
| Gross Vehicle Weight - Maximum - Front Axle |
17,009.0 lbs ( 7,715 kg ) |
| Gross Vehicle Weight - Maximum - Rear Axle |
37,860.0 lbs ( 17,173 kg ) |
| Gross Vehicle Weight - Maximum - Total |
54,869.0 lbs ( 24,888 kg ) |
