Equipment ↠ Caterpillar ↠ Off-Highway Trucks ↠ THIS Caterpillar 725C

Caterpillar 725C For Sale in Casper, WY

Name: Caterpillar 725C
Brand: Caterpillar
Price: 370000 USD
Availability: InStock

❮

❯

For Sale: $370,000.00 USD

Apply for Financing

Wyoming Machinery Company

Wyoming Machinery Company Dealer Info

Wyoming Machinery Company Website

Click here to email Wyoming Machinery Company.

Click for Phone Number

Machine Info:

Hours:	6864
Serial Number:	TFB00148
Machine Location:	CASPER, WY
More Information:	https://catused.com/cu/10126894

Description:

4 HYDRAULIC SPRAY HEADS, AID, STANDARD STARTING, AM/FM RADIO (BLUETOOTH READY), ANTIFREEZE, -36C (-33F), BERKELEY 5X4 HYD PUMP, BODY, STANDARD, CHASSIS, STANDARD, EXHAUST, HEATED BODY, FILM GROUP, ANSI, HAMILTON 5000 GALLON WATER TANK, LUBRICATION, MANUAL, MIRROR, STANDARD, NO MACHINE SECURITY SYSTEM, NO ROOF LIGHTS, Online Owner's Manual , PRODUCT LINK, CELLULAR PL522, ROLL ON-ROLL OFF, SEAT, STANDARD, SERIALIZED TECHNICAL MEDIA KIT, TANK, STANDARD FUEL, TIRES, 23.5R25 MX ** XADN+ E-3

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Body Capacities
Heaped (SAE 2:1)	19.6 cu yd ( 15 cu m )
Struck	14.4 cu yd ( 11 cu m )
Tailgate Heaped SAE 2:1	20.4 cu yd ( 16 cu m )
Tailgate Struck	14.5 cu yd ( 11 cu m )
Body Hoist
Lower Time	8.0 seconds
Raise Time	10.0 seconds
Body Plate
Body Plate Type	High Strength Brinell HB450 Wear Resistant Steel
Dump
Capacity - Heaped	20.4 cu yd ( 16 cu m )
Capacity - Struck	14.4 cu yd ( 11 cu m )
Dump Angle	45.0 deg
Lower Time	8.0 seconds
Raise Time	10.0 seconds
Engine
Bore	4.6 in ( 12 cm )
Displacement	567.0 cu in ( 9,291 cu cm )
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV	Cat C9.3 ACERT
Gross Power	320.0 hp ( 239 kw )
Gross Power - SAE J1995	320.0 hp ( 239 kw )
Max Torque	1,263.0 lbs ft ( 1,712 nm )
Net Power	314.0 hp ( 234 kw )
Net Power - ISO 14396	316.0 hp ( 236 kw )
Net Power - SAE J1349	314.0 hp ( 234 kw )
No Engine De-rating Required Below	8,400.0 ft ( 2,560 m )
Peak Engine Torque Gross (SAE J1995)	1,275.0 lbs ft ( 1,729 nm )
Peak Engine Torque Net (ISO 14396)	1,263.0 lbs ft ( 1,712 nm )
Peak Engine Torque Speed	1,200.0 rpm
Stroke	5.9 in ( 15 cm )
Torque Measured @	1,200.0 rpm
Operating Specifications
Cooling System Fluid Capacity	5.8 gal ( 22 l )
Engine Oil Capacity	2.7 gal ( 10 l )
Fuel Capacity	28.6 gal ( 108 l )
Hydraulic System Fluid Capacity	7.7 gal ( 29 l )
Transmission Fluid Capacity	3.3 gal ( 12 l )
Operating Weights
Center Axle - Empty	10,030.0 lbs ( 4,550 kg )
Center Axle - Loaded	33,333.0 lbs ( 15,120 kg )
Center Axle - Rated Load	23,303.0 lbs ( 10,570 kg )
Front Axle - Empty	31,813.0 lbs ( 14,430 kg )
Front Axle - Loaded	37,236.0 lbs ( 16,890 kg )
Front Axle - Rated Load	5,423.0 lbs ( 2,460 kg )
Rear Axle - Empty	9,348.0 lbs ( 4,240 kg )
Rear Axle - Loaded	32,651.0 lbs ( 14,810 kg )
Rear Axle - Rated Load	23,303.0 lbs ( 10,570 kg )
Total - Empty	51,191.0 lbs ( 23,220 kg )
Total - Loaded	103,220.0 lbs ( 46,820 kg )
Total - Rated Load	52,029.0 lbs ( 23,600 kg )
Service Refill Capacities
Cooling System	21.9 gal ( 83 l )
DEF Tank (ISO 2224-1)	5.3 gal ( 20 l )
Engine Crankcase	10.0 gal ( 38 l )
Final Drives/Differential	35.7 gal ( 135 l )
Fuel Tank	108.8 gal ( 412 l )
Hydraulic System	29.1 gal ( 110 l )
Output Transfer Gear Box	6.3 gal ( 24 l )
Transmission	12.4 gal ( 47 l )
Sound Levels
Interior Cab	76 dB(A)
Standards
Brakes	ISO 3450 - 2011
Cab - FOPS	ISO 3449 Level II - 2005
Cab - ROPS	ISO 3471 - 2008
Steering	ISO 5010 - 2007
Steering System
Lock to Lock	4.75 seconds @ 60 rpm
Transmission
Forward - 1	5.0 mph ( 8 kph )
Forward - 2	9.0 mph ( 14 kph )
Forward - 3	14.0 mph ( 23 kph )
Forward - 4	21.0 mph ( 34 kph )
Forward - 5	30.0 mph ( 48 kph )
Forward - 6	35.0 mph ( 56 kph )
Number of Forward Gears	6.0
Number of Reverse Gears	1.0
Reverse - 1	6.0 mph ( 10 kph )
Turning Circle
Turning Dimensions - Aisle Width	210.0 in ( 533 cm )
Turning Dimensions - Clearance Radius	318.0 in ( 808 cm )
Turning Dimensions - Inside Radius	153.0 in ( 389 cm )
Turning Dimensions - SAE Turning Radius	294.0 in ( 747 cm )
Turning Dimensions - Steer Angle - Left/Right	45.0 deg
Weights
Center Axle - empty	10,030.0 lbs ( 4,550 kg )
Center Axle - loaded	23,303.0 lbs ( 10,570 kg )
Front Axle - empty	31,813.0 lbs ( 14,430 kg )
Front Axle - loaded	5,423.0 lbs ( 2,460 kg )
Rear Axle - empty	9,348.0 lbs ( 4,240 kg )
Rear Axle - loaded	23,303.0 lbs ( 10,570 kg )
Total Empty	51,191.0 lbs ( 23,220 kg )
Total Loaded	103,220.0 lbs ( 46,820 kg )

Dealer Contact Info:

Wyoming Machinery Company

Wyoming Machinery Company Dealer Info

Wyoming Machinery Company Website

Click here to email Wyoming Machinery Company.

Fax: 307-261-4486

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon