Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Auction Pricing
Hours: | 8640 |
Serial Number: | CAT0725CL2T300706 |
Machine Location: | ORLANDO, FL |
Supplied by HeavyEquipmentData.com →
Body Capacities | |
Heaped (SAE 2:1) | 19.6 cu yd ( 15 cu m ) |
Struck | 14.4 cu yd ( 11 cu m ) |
Tailgate Heaped SAE 2:1 | 20.4 cu yd ( 16 cu m ) |
Tailgate Struck | 14.5 cu yd ( 11 cu m ) |
Body Hoist | |
Lower Time | 8.0 seconds |
Raise Time | 10.0 seconds |
Body Plate | |
Body Plate Type | High strength Brinell HB450 wear resistant steel |
Engine | |
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV | Cat C9.3 ACERT |
Gross Power - SAE J1995 | 320.0 hp ( 239 kw ) |
Net Power - ISO 14396 | 316.0 hp ( 236 kw ) |
Net Power - SAE J1349 | 314.0 hp ( 234 kw ) |
No Engine De-rating Required Below | 7,500.0 ft ( 2,286 m ) |
Peak Engine Torque Gross (SAE J1995) | 1,275.0 lbs ft ( 1,729 nm ) |
Peak Engine Torque Net (ISO 14396) | 1,262.0 lbs ft ( 1,711 nm ) |
Peak Engine Torque Net (SAE J1349) | 1,262.0 lbs ft ( 1,711 nm ) |
Peak Engine Torque Speed | 1,200.0 rpm |
General Specifications | |
Articulated/Rigid | A |
Category | Trucks |
Drive Configuration | 6WD |
Engine Type | Cat C9.3 ACERT |
Mfg. Model | 725C2 |
Operating Weight Pounds (Kgs) | 50,795 (23,040) |
Planetary Powershift Transmission | Powershift w/ lockup torque converter |
Rated Payload Tons (Metric Tons) | 26.5 (24) |
Operating Weights | |
Center Axle - Empty | 9,755.0 lbs ( 4,425 kg ) |
Center Axle - Loaded | 33,455.0 lbs ( 15,175 kg ) |
Center Axle - Rated Load | 23,700.0 lbs ( 10,750 kg ) |
Front Axle - Empty | 31,835.0 lbs ( 14,440 kg ) |
Front Axle - Loaded | 37,374.0 lbs ( 16,953 kg ) |
Front Axle - Rated Load | 5,512.0 lbs ( 2,500 kg ) |
Rear Axle - Empty | 9,205.0 lbs ( 4,175 kg ) |
Rear Axle - Loaded | 32,905.0 lbs ( 14,925 kg ) |
Rear Axle - Rated Load | 23,700.0 lbs ( 10,750 kg ) |
Total - Empty | 50,795.0 lbs ( 23,040 kg ) |
Total - Loaded | 103,707.0 lbs ( 47,041 kg ) |
Total - Rated Load | 52,912.0 lbs ( 24,001 kg ) |
Service Refill Capacities | |
Cooling System | 21.9 gal ( 83 l ) |
DEF Tank | 5.3 gal ( 20 l ) |
DEF Tank (ISO 2224-1) | 5.2 gal ( 20 l ) |
Engine Crankcase | 10.0 gal ( 38 l ) |
Final Drives/Differential | 33.0 gal ( 125 l ) |
Fuel Tank | 108.8 gal ( 412 l ) |
Hydraulic System | 29.1 gal ( 110 l ) |
Output Transfer Gear Box | 6.3 gal ( 24 l ) |
Transmission | 12.4 gal ( 47 l ) |
Sound Levels | |
Interior Cab | 76 dB(A) |
Steering System | |
Lock to Lock | 4.75 seconds @ 60 rpm |
Transmission | |
Forward - 1 | 5.0 mph ( 8 kph ) |
Forward - 2 | 9.0 mph ( 14 kph ) |
Forward - 3 | 14.0 mph ( 23 kph ) |
Forward - 4 | 21.0 mph ( 34 kph ) |
Forward - 5 | 29.0 mph ( 47 kph ) |
Forward - 6 | 36.0 mph ( 58 kph ) |
Reverse - 1 | 6.0 mph ( 10 kph ) |
Turning Circle | |
Turning Dimensions - Aisle Width | 210.0 in ( 533 cm ) |
Turning Dimensions - Clearance Radius | 318.0 in ( 808 cm ) |
Turning Dimensions - Inside Radius | 153.0 in ( 389 cm ) |
Turning Dimensions - SAE Turning Radius | 294.0 in ( 747 cm ) |
Turning Dimensions - Steer Angle - Left/Right | 45.0 deg |
Wheel Base Length | |
Long Wheel Base | 215.2 in ( 547 cm ) |
Standard Wheel Base | 156.7 in ( 398 cm ) |