| Articulating/Rigid |
| Articulating/Rigid |
Articulated |
| Body Capacities |
| Heaped (SAE 2:1) |
23.0 cu yd ( 18 cu m ) |
| Struck |
17.4 cu yd ( 13 cu m ) |
| Tailgate Heaped SAE 2:1 |
24.6 cu yd ( 19 cu m ) |
| Tailgate Struck |
18.2 cu yd ( 14 cu m ) |
| Body Hoist |
| Lower Time |
8.0 seconds |
| Raise Time |
12.0 seconds |
| Body Plate |
| Body Plate Type |
High strength Brinell HB450 wear resistant steel |
| Body Plate Thickness |
| Base |
0.6 in ( 2 cm ) |
| Front |
0.4 in ( 1 cm ) |
| Scow |
0.6 in ( 2 cm ) |
| Side |
0.5 in ( 1 cm ) |
| Dimensions |
| Dump Ground Clearance |
1.9 ft ( 1 m ) |
| Dump Height |
21.4 ft ( 7 m ) |
| Ground Clearance |
1.7 ft ( 1 m ) |
| Overall Height |
11.3 ft ( 3 m ) |
| Overall Length |
32.6 ft ( 10 m ) |
| Overall Width |
9.5 ft ( 3 m ) |
| Wheelbase |
15.4 ft ( 5 m ) |
| DRIVE SYSTEM |
| Drive Config |
6x6 |
| Dump |
| Capacity - Heaped |
22.2 cu yd ( 17 cu m ) |
| Capacity - Struck |
17.2 cu yd ( 13 cu m ) |
| Lower Time |
12.0 seconds |
| Raise Time |
12.0 seconds |
| Rated Payload |
61,949.9 lbs ( 28,100 kg ) |
| Engine |
| Aspiration |
Turbochaarged |
| Bore |
5.1 in ( 13 cm ) |
| Displacement |
762.8 cu in ( 12,500 cu cm ) |
| Engine Model |
Cat C13 ACERT |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage IV |
Cat C13 ACERT |
| Gross Power |
329.0 hp ( 245 kw ) |
| Gross Power - SAE J1995 |
375.0 hp ( 280 kw ) |
| Make |
Cat |
| Model |
3196C ATAAC |
| Net Power |
325.0 hp ( 242 kw ) |
| Net Power - EEC 80/1269 |
321.0 hp ( 239 kw ) |
| Net Power - ISO 14396 |
370.0 hp ( 276 kw ) |
| Net Power - ISO 9249 |
321.0 hp ( 239 kw ) |
| Net Power - SAE J1349 |
367.0 hp ( 274 kw ) |
| Number of Cylinders |
6.0 |
| Peak Engine Torque Gross (SAE J1995) |
1,579.0 lbs ft ( 2,141 nm ) |
| Peak Engine Torque Net (SAE J1349) |
1,564.0 lbs ft ( 2,120 nm ) |
| Peak Engine Torque Speed |
1,200.0 rpm |
| Stroke |
6.2 in ( 16 cm ) |
| General Specifications |
| Articulated/Rigid |
A |
| Category |
Trucks |
| Drive Configuration |
6WD |
| Engine Type |
Cat C13 |
| Mfg. Model |
730.0 |
| Operating Weight Pounds (Kgs) |
52,690 (23,900) |
| Planetary Powershift Transmission |
Powershift w/ lockup torque converter |
| Rated Payload Tons (Metric Tons) |
31 (28) |
| Operating Specifications |
| Cooling System Fluid Capacity |
22.5 gal ( 85 l ) |
| Engine Oil Capacity |
9.8 gal ( 37 l ) |
| Fuel Capacity |
95.2 gal ( 360 l ) |
| Hydraulic System Fluid Capacity |
27.0 gal ( 102 l ) |
| Tire Size |
23.5R25 |
| Transmission Fluid Capacity |
9.6 gal ( 36 l ) |
| Operating Weights |
| Center Axle - Empty |
10,053.0 lbs ( 4,560 kg ) |
| Center Axle - Loaded |
37,302.0 lbs ( 16,920 kg ) |
| Center Axle - Rated Load |
27,249.0 lbs ( 12,360 kg ) |
| Front Axle - Empty |
33,069.0 lbs ( 15,000 kg ) |
| Front Axle - Loaded |
40,300.0 lbs ( 18,280 kg ) |
| Front Axle - Rated Load |
7,231.0 lbs ( 3,280 kg ) |
| Rear Axle - Empty |
9,568.0 lbs ( 4,340 kg ) |
| Rear Axle - Loaded |
36,817.0 lbs ( 16,700 kg ) |
| Rear Axle - Rated Load |
27,249.0 lbs ( 12,360 kg ) |
| Total - Empty |
52,690.0 lbs ( 23,900 kg ) |
| Total - Loaded |
114,420.0 lbs ( 51,900 kg ) |
| Total - Rated Load |
61,729.0 lbs ( 28,000 kg ) |
| Service Refill Capacities |
| Cooling System |
21.9 gal ( 83 l ) |
| DEF Tank |
5.3 gal ( 20 l ) |
| Engine Crankcase |
10.0 gal ( 38 l ) |
| Final Drives/Differential |
33.0 gal ( 125 l ) |
| Fuel Tank |
108.8 gal ( 412 l ) |
| Hydraulic System |
29.1 gal ( 110 l ) |
| Output Transfer Gear Box |
6.3 gal ( 24 l ) |
| Transmission |
12.4 gal ( 47 l ) |
| Sound Levels |
| Interior Cab |
72 dB(A) |
| Standards |
| Brakes |
ISO 3450 2011 |
| Cab - FOPS |
ISO 3449 Level II 2005 |
| Cab - ROPS |
ISO 3471 2008 |
| Steering |
ISO 5010 2007 |
| Steering System |
| Lock to Lock |
4.75 seconds @ 60 rpm |
| Transmission |
| Forward - 1 |
5.0 mph ( 8 kph ) |
| Forward - 2 |
9.0 mph ( 14 kph ) |
| Forward - 3 |
14.0 mph ( 23 kph ) |
| Forward - 4 |
21.0 mph ( 34 kph ) |
| Forward - 5 |
29.0 mph ( 47 kph ) |
| Forward - 6 |
34.0 mph ( 55 kph ) |
| Max Speed |
34.4 mph ( 55 kph ) |
| Number of Forward Gears |
6.0 |
| Number of Reverse Gears |
1.0 |
| Reverse - 1 |
6.0 mph ( 10 kph ) |
| Turning Circle |
| Turning Dimensions - Aisle Width |
210.0 in ( 533 cm ) |
| Turning Dimensions - Clearance Radius |
318.0 in ( 808 cm ) |
| Turning Dimensions - Inside Radius |
153.0 in ( 389 cm ) |
| Turning Dimensions - SAE Turning Radius |
294.0 in ( 747 cm ) |
| Weights |
| Center Axle - empty |
11,023.2 lbs ( 5,000 kg ) |
| Center Axle - loaded |
39,021.9 lbs ( 17,700 kg ) |
| Front Axle - empty |
28,968.8 lbs ( 13,140 kg ) |
| Front Axle - loaded |
34,965.4 lbs ( 15,860 kg ) |
| Operating Weight |
109,600.0 lbs ( 49,714 kg ) |
| Rear Axle - empty |
10,383.8 lbs ( 4,710 kg ) |
| Rear Axle - loaded |
38,382.5 lbs ( 17,410 kg ) |
| Total Empty |
50,375.7 lbs ( 22,850 kg ) |
| Total Loaded |
112,369.7 lbs ( 50,970 kg ) |
