Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $70,000.00 USD
Apply for FinancingHours: | 14561 |
Serial Number: | B1N00135 |
Machine Location: | CARUGATE, ITALY |
More Information: | https://catused.com/cu/10135603 |
Supplied by HeavyEquipmentData.com →
Articulating/Rigid | |
Articulating/Rigid | Articulated |
Body Capacities | |
Heaped (SAE 2:1) | 25.8 cu yd ( 20 cu m ) |
Struck | 19.0 cu yd ( 15 cu m ) |
Tailgate Heaped SAE 2:1 | 27.3 cu yd ( 21 cu m ) |
Tailgate Struck | 19.9 cu yd ( 15 cu m ) |
Body Hoist | |
Lower Time | 7.0 seconds |
Raise Time | 11.0 seconds |
Body Plate | |
Body Plate Type | High strength Brinell HB450 wear resistant steel |
Body Plate Thickness | |
Base | 0.6 in ( 2 cm ) |
Front | 0.4 in ( 1 cm ) |
Scow | 0.6 in ( 2 cm ) |
Side | 0.5 in ( 1 cm ) |
Dimensions | |
Dump Ground Clearance | 2.1 ft ( 1 m ) |
Dump Height | 22.9 ft ( 7 m ) |
Ground Clearance | 1.8 ft ( 1 m ) |
Overall Height | 12.2 ft ( 4 m ) |
Overall Length | 35.8 ft ( 11 m ) |
Overall Width | 11.1 ft ( 3 m ) |
Wheelbase | 17.2 ft ( 5 m ) |
DRIVE SYSTEM | |
Drive Config | 6x6 |
Dump | |
Capacity - Heaped | 25.8 cu yd ( 20 cu m ) |
Capacity - Struck | 19.3 cu yd ( 15 cu m ) |
Lower Time | 7.0 seconds |
Raise Time | 11.0 seconds |
Rated Payload | 72,091.2 lbs ( 32,700 kg ) |
Engine | |
Aspiration | Turbocharged |
Bore | 5.4 in ( 14 cm ) |
Displacement | 926.0 cu in ( 15,174 cu cm ) |
Engine Model | Cat C15 ACERT |
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV | Cat C13 ACERT |
Flywheel Power | 385.0 hp ( 287 kw ) |
Gross Power | 413.0 hp ( 308 kw ) |
Gross Power - SAE J1995 | 435.0 hp ( 324 kw ) |
Make | Cat |
Max Torque | 1,524.6 lbs ft ( 2,067 nm ) |
Model | 3408E ATAAC |
Net Power | 394.0 hp ( 294 kw ) |
Net Power - EEC 80/1269 | 424.0 hp ( 316 kw ) |
Net Power - ISO 14396 | 429.0 hp ( 320 kw ) |
Net Power - ISO 9249 | 424.0 hp ( 316 kw ) |
Net Power - SAE J1349 | 419.0 hp ( 312 kw ) |
Number of Cylinders | 6.0 |
Peak Engine Torque Gross (SAE J1995) | 1,614.0 lbs ft ( 2,188 nm ) |
Peak Engine Torque Net (SAE J1349) | 1,597.0 lbs ft ( 2,165 nm ) |
Peak Engine Torque Speed | 1,200.0 rpm |
Stroke | 6.8 in ( 17 cm ) |
Torque Measured @ | 1,200.0 rpm |
General Specifications | |
Articulated/Rigid | A |
Category | Trucks |
Drive Configuration | 6WD |
Engine Type | Cat C13 |
Mfg. Model | 735.0 |
Operating Weight Pounds (Kgs) | 55,645 (25,240) |
Planetary Powershift Transmission | Powershift w/ lockup torque converter |
Rated Payload Tons (Metric Tons) | 35 (32) |
Operating Specifications | |
Cooling System Fluid Capacity | 21.2 gal ( 80 l ) |
Engine Oil Capacity | 10.1 gal ( 38 l ) |
Fuel Capacity | 148.0 gal ( 560 l ) |
Hydraulic System Fluid Capacity | 61.6 gal ( 233 l ) |
Tire Size | 26.5R25 |
Transmission Fluid Capacity | 19.1 gal ( 72 l ) |
Operating Weights | |
Center Axle - Empty | 14,406.0 lbs ( 6,534 kg ) |
Center Axle - Loaded | 46,743.0 lbs ( 21,202 kg ) |
Center Axle - Rated Load | 32,337.0 lbs ( 14,668 kg ) |
Front Axle - Empty | 41,881.0 lbs ( 18,997 kg ) |
Front Axle - Loaded | 49,298.0 lbs ( 22,361 kg ) |
Front Axle - Rated Load | 7,417.0 lbs ( 3,364 kg ) |
Rear Axle - Empty | 12,919.0 lbs ( 5,860 kg ) |
Rear Axle - Loaded | 45,256.0 lbs ( 20,528 kg ) |
Rear Axle - Rated Load | 32,337.0 lbs ( 14,668 kg ) |
Total - Empty | 69,206.0 lbs ( 31,391 kg ) |
Total - Loaded | 141,297.0 lbs ( 64,091 kg ) |
Total - Rated Load | 72,091.0 lbs ( 32,700 kg ) |
Service Refill Capacities | |
Cooling System | 25.1 gal ( 95 l ) |
DEF Tank | 5.3 gal ( 20 l ) |
Engine Crankcase | 10.6 gal ( 40 l ) |
Final Drives/Differential | 21.1 gal ( 80 l ) |
Fuel Tank | 148.0 gal ( 560 l ) |
Hydraulic System | 86.6 gal ( 328 l ) |
Output Transfer Gear Box | 6.3 gal ( 24 l ) |
Transmission | 22.5 gal ( 85 l ) |
Sound Levels | |
Interior Cab | 79 dB(A) |
Standards | |
Brakes | SAE J/ISO 3450-1998 |
Cab - FOPS | SAE J231 JAN81 and ISO 3449-1992 Level II |
Cab - ROPS | SAE J1040 May 1994 and ISO 3471-1994 |
Steering | ISO 5010 1992E |
Steering System | |
Lock to Lock | 4.75 seconds @ 60 rpm |
Transmission | |
Forward - 1 | 5.2 mph ( 8 kph ) |
Forward - 2 | 7.1 mph ( 11 kph ) |
Forward - 3 | 9.6 mph ( 15 kph ) |
Forward - 4 | 12.9 mph ( 21 kph ) |
Forward - 5 | 17.5 mph ( 28 kph ) |
Forward - 6 | 23.5 mph ( 38 kph ) |
Forward - 7 | 31.9 mph ( 51 kph ) |
Max Speed | 36.3 mph ( 58 kph ) |
Number of Forward Gears | 8.0 |
Number of Reverse Gears | 1.0 |
Reverse - 1 | 5.0 mph ( 8 kph ) |
Reverse - 2 | 6.8 mph ( 11 kph ) |
Turning Circle | |
Turning Dimensions - Aisle Width | 212.0 in ( 538 cm ) |
Turning Dimensions - Clearance Radius | 318.0 in ( 808 cm ) |
Turning Dimensions - Inside Radius | 149.0 in ( 378 cm ) |
Turning Dimensions - SAE Turning Radius | 294.0 in ( 747 cm ) |
Weights | |
Center Axle - empty | 14,087.6 lbs ( 6,390 kg ) |
Center Axle - loaded | 45,900.3 lbs ( 20,820 kg ) |
Front Axle - empty | 40,014.0 lbs ( 18,150 kg ) |
Front Axle - loaded | 48,479.7 lbs ( 21,990 kg ) |
Operating Weight | 135,610.0 lbs ( 61,512 kg ) |
Rear Axle - empty | 12,588.4 lbs ( 5,710 kg ) |
Rear Axle - loaded | 44,401.2 lbs ( 20,140 kg ) |
Total Empty | 66,689.9 lbs ( 30,250 kg ) |
Total Loaded | 138,781.1 lbs ( 62,950 kg ) |