| Articulating/Rigid |
| Articulating/Rigid |
Articulated |
| Body Capacities |
| Heaped (SAE 2:1) |
25.8 cu yd ( 20 cu m ) |
| Struck |
19.0 cu yd ( 15 cu m ) |
| Tailgate Heaped SAE 2:1 |
27.3 cu yd ( 21 cu m ) |
| Tailgate Struck |
19.9 cu yd ( 15 cu m ) |
| Body Hoist |
| Lower Time |
7.0 seconds |
| Raise Time |
11.0 seconds |
| Body Plate |
| Body Plate Type |
High strength Brinell HB450 wear resistant steel |
| Body Plate Thickness |
| Base |
0.6 in ( 2 cm ) |
| Front |
0.4 in ( 1 cm ) |
| Scow |
0.6 in ( 2 cm ) |
| Side |
0.5 in ( 1 cm ) |
| Dimensions |
| Dump Ground Clearance |
2.1 ft ( 1 m ) |
| Dump Height |
22.9 ft ( 7 m ) |
| Ground Clearance |
1.8 ft ( 1 m ) |
| Overall Height |
12.2 ft ( 4 m ) |
| Overall Length |
35.8 ft ( 11 m ) |
| Overall Width |
11.1 ft ( 3 m ) |
| Wheelbase |
17.2 ft ( 5 m ) |
| DRIVE SYSTEM |
| Drive Config |
6x6 |
| Dump |
| Capacity - Heaped |
25.8 cu yd ( 20 cu m ) |
| Capacity - Struck |
19.3 cu yd ( 15 cu m ) |
| Lower Time |
7.0 seconds |
| Raise Time |
11.0 seconds |
| Rated Payload |
72,091.2 lbs ( 32,700 kg ) |
| Engine |
| Aspiration |
Turbocharged |
| Bore |
5.4 in ( 14 cm ) |
| Displacement |
926.0 cu in ( 15,174 cu cm ) |
| Engine Model |
Cat C15 ACERT |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage IV |
Cat C13 ACERT |
| Flywheel Power |
385.0 hp ( 287 kw ) |
| Gross Power |
413.0 hp ( 308 kw ) |
| Gross Power - SAE J1995 |
435.0 hp ( 324 kw ) |
| Make |
Cat |
| Max Torque |
1,524.6 lbs ft ( 2,067 nm ) |
| Model |
3408E ATAAC |
| Net Power |
394.0 hp ( 294 kw ) |
| Net Power - EEC 80/1269 |
424.0 hp ( 316 kw ) |
| Net Power - ISO 14396 |
429.0 hp ( 320 kw ) |
| Net Power - ISO 9249 |
424.0 hp ( 316 kw ) |
| Net Power - SAE J1349 |
419.0 hp ( 312 kw ) |
| Number of Cylinders |
6.0 |
| Peak Engine Torque Gross (SAE J1995) |
1,614.0 lbs ft ( 2,188 nm ) |
| Peak Engine Torque Net (SAE J1349) |
1,597.0 lbs ft ( 2,165 nm ) |
| Peak Engine Torque Speed |
1,200.0 rpm |
| Stroke |
6.8 in ( 17 cm ) |
| Torque Measured @ |
1,200.0 rpm |
| General Specifications |
| Articulated/Rigid |
A |
| Category |
Trucks |
| Drive Configuration |
6WD |
| Engine Type |
Cat C13 |
| Mfg. Model |
735.0 |
| Operating Weight Pounds (Kgs) |
55,645 (25,240) |
| Planetary Powershift Transmission |
Powershift w/ lockup torque converter |
| Rated Payload Tons (Metric Tons) |
35 (32) |
| Operating Specifications |
| Cooling System Fluid Capacity |
21.2 gal ( 80 l ) |
| Engine Oil Capacity |
10.1 gal ( 38 l ) |
| Fuel Capacity |
148.0 gal ( 560 l ) |
| Hydraulic System Fluid Capacity |
61.6 gal ( 233 l ) |
| Tire Size |
26.5R25 |
| Transmission Fluid Capacity |
19.1 gal ( 72 l ) |
| Operating Weights |
| Center Axle - Empty |
14,406.0 lbs ( 6,534 kg ) |
| Center Axle - Loaded |
46,743.0 lbs ( 21,202 kg ) |
| Center Axle - Rated Load |
32,337.0 lbs ( 14,668 kg ) |
| Front Axle - Empty |
41,881.0 lbs ( 18,997 kg ) |
| Front Axle - Loaded |
49,298.0 lbs ( 22,361 kg ) |
| Front Axle - Rated Load |
7,417.0 lbs ( 3,364 kg ) |
| Rear Axle - Empty |
12,919.0 lbs ( 5,860 kg ) |
| Rear Axle - Loaded |
45,256.0 lbs ( 20,528 kg ) |
| Rear Axle - Rated Load |
32,337.0 lbs ( 14,668 kg ) |
| Total - Empty |
69,206.0 lbs ( 31,391 kg ) |
| Total - Loaded |
141,297.0 lbs ( 64,091 kg ) |
| Total - Rated Load |
72,091.0 lbs ( 32,700 kg ) |
| Service Refill Capacities |
| Cooling System |
25.1 gal ( 95 l ) |
| DEF Tank |
5.3 gal ( 20 l ) |
| Engine Crankcase |
10.6 gal ( 40 l ) |
| Final Drives/Differential |
21.1 gal ( 80 l ) |
| Fuel Tank |
148.0 gal ( 560 l ) |
| Hydraulic System |
86.6 gal ( 328 l ) |
| Output Transfer Gear Box |
6.3 gal ( 24 l ) |
| Transmission |
22.5 gal ( 85 l ) |
| Sound Levels |
| Interior Cab |
79 dB(A) |
| Standards |
| Brakes |
SAE J/ISO 3450-1998 |
| Cab - FOPS |
SAE J231 JAN81 and ISO 3449-1992 Level II |
| Cab - ROPS |
SAE J1040 May 1994 and ISO 3471-1994 |
| Steering |
ISO 5010 1992E |
| Steering System |
| Lock to Lock |
4.75 seconds @ 60 rpm |
| Transmission |
| Forward - 1 |
5.2 mph ( 8 kph ) |
| Forward - 2 |
7.1 mph ( 11 kph ) |
| Forward - 3 |
9.6 mph ( 15 kph ) |
| Forward - 4 |
12.9 mph ( 21 kph ) |
| Forward - 5 |
17.5 mph ( 28 kph ) |
| Forward - 6 |
23.5 mph ( 38 kph ) |
| Forward - 7 |
31.9 mph ( 51 kph ) |
| Max Speed |
36.3 mph ( 58 kph ) |
| Number of Forward Gears |
8.0 |
| Number of Reverse Gears |
1.0 |
| Reverse - 1 |
5.0 mph ( 8 kph ) |
| Reverse - 2 |
6.8 mph ( 11 kph ) |
| Turning Circle |
| Turning Dimensions - Aisle Width |
212.0 in ( 538 cm ) |
| Turning Dimensions - Clearance Radius |
318.0 in ( 808 cm ) |
| Turning Dimensions - Inside Radius |
149.0 in ( 378 cm ) |
| Turning Dimensions - SAE Turning Radius |
294.0 in ( 747 cm ) |
| Weights |
| Center Axle - empty |
14,087.6 lbs ( 6,390 kg ) |
| Center Axle - loaded |
45,900.3 lbs ( 20,820 kg ) |
| Front Axle - empty |
40,014.0 lbs ( 18,150 kg ) |
| Front Axle - loaded |
48,479.7 lbs ( 21,990 kg ) |
| Operating Weight |
135,610.0 lbs ( 61,512 kg ) |
| Rear Axle - empty |
12,588.4 lbs ( 5,710 kg ) |
| Rear Axle - loaded |
44,401.2 lbs ( 20,140 kg ) |
| Total Empty |
66,689.9 lbs ( 30,250 kg ) |
| Total Loaded |
138,781.1 lbs ( 62,950 kg ) |
