Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
MACHINE SOLD
Hours: | 8914 |
Serial Number: | 3T800114 |
Machine Location: | PISCATAWAY, NJ |
More Information: | https://catused.com/cu/10138480 |
Supplied by HeavyEquipmentData.com →
BODY CAPACITIES | |
Heaped (SAE 2:1) | 29.7 cu yd ( 23 cu m ) |
Struck | 22.2 cu yd ( 17 cu m ) |
Tailgate Heaped SAE 2:1 | 31.9 cu yd ( 24 cu m ) |
Tailgate Struck | 23.4 cu yd ( 18 cu m ) |
BODY HOIST | |
Lower Time | 12 s |
Raise Time | 12 s |
BODY PLATE | |
Type | High strength Brinell HB450 wear resistant steel |
BODY PLATE THICKNESS | |
Base Plate | 0.5 in ( 1 cm ) |
Front Plate | 0.3 in ( 1 cm ) |
Side Plates | 0.4 in ( 1 cm ) |
ENGINE | |
Bore | 5.4 in ( 14 cm ) |
Displacement | 926.0 cu in ( 15,174 cu cm ) |
Emissions | Meets Tier 4 Final and Stage V standards |
Engine Model | Cat® C15 |
Engine Model - U.S. EPA Tier 4 Final/EU Stage V | Cat C15 |
Gross Power - SAE J1995 | 452.0 hp ( 337 kw ) |
Net Power - ISO 14396 | 447.0 hp ( 333 kw ) |
Net Power - SAE J1349 | 439.0 hp ( 327 kw ) |
No Engine De-rating Below | 10,000.0 ft ( 3,048 m ) |
Peak Engine Torque Gross (SAE J1995) | 1,711.0 lbs ft ( 2,320 nm ) |
Peak Engine Torque Net (SAE J1349) | 1,670.0 lbs ft ( 2,264 nm ) |
Peak Engine Torque Speed | 1200 r/min |
Stroke | 6.8 in ( 17 cm ) |
NOTES | |
Note (1) | References to emission standards |
Note (2) | Power ratings at 1,700 rpm |
Note (3) | Power available at the flywheel |
Note (4) | Net power at max fan speed is 327 kW (439 hp) |
Note (5) | DEF must meet ISO 22241-1 standard |
OPERATING WEIGHTS | |
Total - Empty | 71,377.0 lbs ( 32,376 kg ) |
Total - Loaded | 151,405.0 lbs ( 68,676 kg ) |
Total - Rated Load | 80,027.0 lbs ( 36,300 kg ) |
SERVICE REFILL CAPACITIES | |
Cooling System | 23.7 gal ( 90 l ) |
DEF Tank | 6.5 gal ( 25 l ) |
Engine Crankcase | 13.7 gal ( 52 l ) |
Fuel Tank | 145.3 gal ( 550 l ) |
Transmission - OTG | 19.8 gal ( 75 l ) |
SOUND LEVELS | |
Interior Cab | 72 dB(A) |
STANDARDS | |
Brakes | ISO 3450 – 2011 |
Cab - FOPS | ISO 3449 Level II – 2005 |
STEERING | |
Lock to Lock | 4.75 seconds @ 60 rpm |
TRANSMISSION | |
Forward - 1 | 4.0 mph ( 6 kph ) |
Forward - 2 | 5.3 mph ( 9 kph ) |
Forward - 3 | 7.3 mph ( 12 kph ) |
Forward - 4 | 9.2 mph ( 15 kph ) |
Forward - 5 | 12.2 mph ( 20 kph ) |
Forward - 6 | 14.9 mph ( 24 kph ) |
Forward - 7 | 20.6 mph ( 33 kph ) |
Forward - 8 | 24.7 mph ( 40 kph ) |
Forward - 9 | 35.7 mph ( 57 kph ) |
Reverse - 1 | 4.2 mph ( 7 kph ) |
Reverse - 2 | 9.8 mph ( 16 kph ) |
TURNING CIRCLE | |
Note | Dimensions are for machines equipped with 29.5 R25 tires. |
Turning Dimensions - Aisle Width | 220.0 in ( 559 cm ) |
Turning Dimensions - Clearance Radius | 330.0 in ( 838 cm ) |
Turning Dimensions - Inside Radius | 156.0 in ( 396 cm ) |
Turning Dimensions - SAE Turning Radius | 303.0 in ( 770 cm ) |
Turning Dimensions - Steer Angle - Left/Right | 45° |
WEIGHTS | |
Rated Payload | 40.0 t ( 40,000 kg ) |