Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $560,000.00 USD
Apply for FinancingHours: | 3330 |
Serial Number: | 3T603540 |
Machine Location: | SAN ANTONIO, TX |
More Information: | https://catused.com/cu/10136695 |
Supplied by HeavyEquipmentData.com →
BODY CAPACITIES | |
Heaped (SAE 2:1) | 32.7 cu yd ( 25 cu m ) |
Struck | 24.2 cu yd ( 19 cu m ) |
Tailgate Heaped SAE 2:1 | 34.7 cu yd ( 27 cu m ) |
Tailgate Struck | 25.5 cu yd ( 20 cu m ) |
BODY HOIST | |
Lower (automatic) | 10 s |
Lower (manual) | 10 s |
Raise (automatic) | 13 s |
Raise (manual) | 12 s |
BODY PLATE | |
Base | 0.6 in ( 1 cm ) |
Chute | 0.6 in ( 1 cm ) |
Front | 0.3 in ( 1 cm ) |
Side | 0.4 in ( 1 cm ) |
Type | High Strength Brinell HB450 Wear Resistant Steel |
ENGINE | |
Bore | 5.7 in ( 14 cm ) |
Displacement | 1,106.0 cu in ( 18,124 cu cm ) |
Emissions | Meets Tier 4 Final and Stage V standards |
Engine Model | Cat C18 |
Engine Model - Regulations | Cat® C18 (U.S. EPA Tier 4 Final EU Stage V etc.) |
Gross Power - SAE J1995 | 511.0 hp ( 381 kw ) |
Net Power - ISO 14396 | 504.0 hp ( 376 kw ) |
Net Power - SAE J1349 | 496.0 hp ( 370 kw ) |
Peak Engine Torque Gross (SAE J1995) | 1,931.0 lbs ft ( 2,618 nm ) |
Peak Engine Torque Net (SAE J1349) | 1,887.0 lbs ft ( 2,558 nm ) |
Peak Engine Torque Speed | 1200 r/min |
Stroke | 7.2 in ( 18 cm ) |
NOTES ON ENGINE | |
Note (1) | Power ratings at 1700 rpm |
Note (2) | Power at the flywheel with minimum equipment |
Note (3) | Net power with fan at max is 348 kW (467 hp) |
Note (4) | DEF must meet ISO 22241-1 standard |
OPERATING WEIGHTS | |
Center Axle - Empty | 15,309.0 lbs ( 6,944 kg ) |
Center Axle - Loaded | 54,000.0 lbs ( 24,494 kg ) |
Center Axle - Rated Load | 38,691.0 lbs ( 17,550 kg ) |
Front Axle - Empty | 43,515.0 lbs ( 19,738 kg ) |
Front Axle - Loaded | 56,522.0 lbs ( 25,638 kg ) |
Front Axle - Rated Load | 13,007.0 lbs ( 5,900 kg ) |
Rear Axle - Empty | 14,731.0 lbs ( 6,682 kg ) |
Rear Axle - Loaded | 53,422.0 lbs ( 24,232 kg ) |
Rear Axle - Rated Load | 38,691.0 lbs ( 17,550 kg ) |
Total - Empty | 73,553.0 lbs ( 33,363 kg ) |
Total - Loaded | 163,942.0 lbs ( 74,363 kg ) |
Total - Rated Load | 90,390.0 lbs ( 41,000 kg ) |
SERVICE REFILL CAPACITIES | |
Axles - Each | 15.8 gal ( 60 l ) |
Brake Cooling Tank | 17.7 gal ( 67 l ) |
Cooling System | 23.7 gal ( 90 l ) |
DEF Tank | 5.3 gal ( 20 l ) |
Engine Crankcase | 13.7 gal ( 52 l ) |
Final Drive - Each | 1.3 gal ( 5 l ) |
Fuel Tank | 145.3 gal ( 550 l ) |
Steering/Hoist Hydraulic System | 36.9 gal ( 140 l ) |
Transmission - OTG | 19.8 gal ( 75 l ) |
SOUND LEVELS | |
Interior Cab | 72 dB(A) |
Note (1) | Operator sound exposure Leq is 76 dB(A) |
Note (2) | Hearing protection may be needed in certain settings |
STANDARDS | |
Brakes | ISO 3450 – 2011 |
Cab - FOPS | ISO 3449 Level II – 2005 |
Cab - ROPS | ISO 3471 – 2008 |
Steering | ISO 5010 – 2007 |
STEERING | |
Lock to Lock | 4.8 seconds @ 60 rpm |
TRANSMISSION | |
Forward - 1 | 3.8 mph ( 6 kph ) |
Forward - 2 | 5.0 mph ( 8 kph ) |
Forward - 3 | 7.0 mph ( 11 kph ) |
Forward - 4 | 8.8 mph ( 14 kph ) |
Forward - 5 | 11.6 mph ( 19 kph ) |
Forward - 6 | 14.2 mph ( 23 kph ) |
Forward - 7 | 19.6 mph ( 32 kph ) |
Forward - 8 | 23.5 mph ( 38 kph ) |
Forward - 9 | 34.0 mph ( 55 kph ) |
Reverse - 1 | 4.0 mph ( 6 kph ) |
Reverse - 2 | 9.1 mph ( 15 kph ) |
TURNING CIRCLE | |
Note | Dimensions are for machines equipped with 29.5R25 tires. |
Turning Dimensions - Aisle Width | 233.0 in ( 592 cm ) |
Turning Dimensions - Clearance Radius | 359.0 in ( 912 cm ) |
Turning Dimensions - Inside Radius | 174.0 in ( 442 cm ) |
Turning Dimensions - SAE Turning Radius | 340.0 in ( 864 cm ) |
Turning Dimensions - Steer Angle - Left/Right | 45° |
WEIGHTS | |
Rated Payload | 45.2 t ( 45,200 kg ) |