Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $155,000.00 USD
Apply for FinancingSerial Number: | CAT0745CCTFK00712 |
Machine Location: | PLEASUREVILLE, KY |
Supplied by HeavyEquipmentData.com →
Body Capacities | |
Heaped (SAE 2:1) | 32.7 cu yd ( 25 cu m ) |
Struck | 24.2 cu yd ( 19 cu m ) |
Tailgate Heaped SAE 2:1 | 34.7 cu yd ( 27 cu m ) |
Tailgate Struck | 25.5 cu yd ( 20 cu m ) |
Body Hoist | |
Lower Time | 8.0 seconds |
Raise Time | 12.0 seconds |
Body Plate | |
Body Plate Type | High strength Brinell HB450 wear resistant steel |
Dump | |
Capacity - Heaped | 32.7 cu yd ( 25 cu m ) |
Capacity - Struck | 24.2 cu yd ( 19 cu m ) |
Lower Time | 8.0 seconds |
Raise Time | 12.0 seconds |
Engine | |
Bore | 5.7 in ( 14 cm ) |
Displacement | 1,106.0 cu in ( 18,124 cu cm ) |
Engine Model | Cat C18 ACERT |
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final | Cat C18 ACERT |
Gross Power | 511.0 hp ( 381 kw ) |
Gross Power - SAE J1995 | 511.0 hp ( 381 kw ) |
Net Power | 496.0 hp ( 370 kw ) |
Net Power - ISO 14396 | 504.0 hp ( 376 kw ) |
Net Power - SAE J1349 | 496.0 hp ( 370 kw ) |
No Engine De-rating Required Below | 10,000.0 ft ( 3,048 m ) |
Peak Engine Torque Gross (SAE J1995) | 1,931.0 lbs ft ( 2,618 nm ) |
Peak Engine Torque Net (SAE J1349) | 1,887.0 lbs ft ( 2,558 nm ) |
Peak Engine Torque Speed | 1,200.0 rpm |
Stroke | 7.2 in ( 18 cm ) |
Torque Measured @ | 1,200.0 rpm |
Operating Specifications | |
Cooling System Fluid Capacity | 23.7 gal ( 90 l ) |
Fuel Capacity | 145.3 gal ( 550 l ) |
Hydraulic System Fluid Capacity | 36.9 gal ( 140 l ) |
Transmission Fluid Capacity | 19.8 gal ( 75 l ) |
Operating Weights | |
Center Axle - Empty | 15,300.0 lbs ( 6,940 kg ) |
Center Axle - Loaded | 53,991.0 lbs ( 24,490 kg ) |
Center Axle - Rated Load | 38,691.0 lbs ( 17,550 kg ) |
Front Axle - Empty | 43,585.0 lbs ( 19,770 kg ) |
Front Axle - Loaded | 56,593.0 lbs ( 25,670 kg ) |
Front Axle - Rated Load | 13,007.0 lbs ( 5,900 kg ) |
Rear Axle - Empty | 14,749.0 lbs ( 6,690 kg ) |
Rear Axle - Loaded | 53,440.0 lbs ( 24,240 kg ) |
Rear Axle - Rated Load | 38,691.0 lbs ( 17,550 kg ) |
Total - Empty | 73,634.0 lbs ( 33,400 kg ) |
Total - Loaded | 164,024.0 lbs ( 74,400 kg ) |
Total - Rated Load | 90,389.0 lbs ( 41,000 kg ) |
Service Refill Capacities | |
Axles - Each | 15.8 gal ( 60 l ) |
Brake Cooling Tank | 17.7 gal ( 67 l ) |
Cooling System | 23.7 gal ( 90 l ) |
DEF Tank | 6.6 gal ( 25 l ) |
Engine Crankcase | 13.7 gal ( 52 l ) |
Final Drive - Each | 1.3 gal ( 5 l ) |
Fuel Tank | 145.3 gal ( 550 l ) |
Steering/Hoist Hydraulic System | 36.9 gal ( 140 l ) |
Transmission - OTG | 19.8 gal ( 75 l ) |
Sound Levels | |
Interior Cab | 79 dB(A) |
Standards | |
Brakes | ISO 3450 2011 |
Cab - FOPS | ISO 3449 Level II 2005 |
Cab - ROPS | ISO 3471 2008 |
Steering | ISO 5010 2007 |
Steering System | |
Lock to Lock | 4.8 seconds @ 60 rpm |
Transmission | |
Forward - 1 | 3.8 mph ( 6 kph ) |
Forward - 2 | 5.0 mph ( 8 kph ) |
Forward - 3 | 7.0 mph ( 11 kph ) |
Forward - 4 | 8.8 mph ( 14 kph ) |
Forward - 5 | 11.6 mph ( 19 kph ) |
Forward - 6 | 14.2 mph ( 23 kph ) |
Forward - 7 | 19.6 mph ( 32 kph ) |
Forward - 8 | 23.5 mph ( 38 kph ) |
Forward - 9 | 34.0 mph ( 55 kph ) |
Number of Forward Gears | 9.0 |
Number of Reverse Gears | 2.0 |
Reverse - 1 | 4.0 mph ( 6 kph ) |
Reverse - 2 | 9.1 mph ( 15 kph ) |
Turning Circle | |
Turning Dimensions - Aisle Width | 235.0 in ( 597 cm ) |
Turning Dimensions - Clearance Radius | 358.0 in ( 909 cm ) |
Turning Dimensions - Inside Radius | 174.0 in ( 442 cm ) |
Turning Dimensions - SAE Turning Radius | 340.0 in ( 864 cm ) |
Weights | |
Center Axle - empty | 15,300.0 lbs ( 6,940 kg ) |
Center Axle - loaded | 53,991.0 lbs ( 24,490 kg ) |
Front Axle - empty | 43,585.0 lbs ( 19,770 kg ) |
Front Axle - loaded | 56,593.0 lbs ( 25,670 kg ) |
Rear Axle - empty | 14,749.0 lbs ( 6,690 kg ) |
Rear Axle - loaded | 53,440.0 lbs ( 24,240 kg ) |
Total Empty | 73,634.0 lbs ( 33,400 kg ) |
Total Loaded | 90,389.0 lbs ( 41,000 kg ) |
Wheel Base Length | |
Long Wheel Base | 228.4 in ( 580 cm ) |
Standard Wheel Base | 180.7 in ( 459 cm ) |