List Your Equipment For Free  /  Seller Login

Caterpillar 772 For Sale in Edmonton, AB



For Sale: $445,000.00 USD

Apply for Financing

Finning CAT



Contact: Kelly Kittson

Click for Phone Number

Machine Info:

Hours:17236
Serial Number:RLB00359
Machine Location:EDMONTON, AB
More Information:https://catused.com/cu/10097775

Description:

Online Owner's Manual


From the manufacturer:

Supplied by HeavyEquipmentData.com →

Approximate Weights - Dual Slope
Gross Weight - Empty 112,000.0 lbs  ( 50,802 kg )
Approximate Weights - Flat Floor
Chassis 35.0 lbs  ( 16 kg )
Articulating/Rigid
Articulating/Rigid Rigid
Body Hoists
Body Lower Time - Float 12.5 seconds
Body Power Down - High Idle 12.5 seconds
Body Raise Time - High Idle 9.5 seconds
Pump Flow - High Idle 136.0 gpm  ( 515 lpm )
Relief Valve Setting - Raise 2,500.0 psi
Brakes
Brake Surface - Rear 7,794.0 cu in  ( 127,721 cu cm )
Standards 2.74:1
Capacity - Flat Floor - 100% Fill Factor
Heaped 2:1 (SAE) 41.0 cu yd  ( 31 cu m )
Dimensions
Centerline Front Tire Width 10.4 ft  ( 3 m )
Dump Ground Clearance 1.9 ft  ( 1 m )
Dump Height 27.5 ft  ( 8 m )
Front Canopy Height 13.9 ft  ( 4 m )
Ground Clearance 2.4 ft  ( 1 m )
Inside Body Depth - Maximum 5.6 ft  ( 2 m )
Inside Body Length 18.3 ft  ( 6 m )
Loading Height - Empty 11.5 ft  ( 4 m )
Operating Width 15.6 ft  ( 5 m )
Overall Canopy Width 500.0 ft  ( 152 m )
Overall Height 14.0 ft  ( 4 m )
Overall Height - Body Raised 27.5 ft  ( 8 m )
Overall Length 28.7 ft  ( 9 m )
Overall Width 15.7 ft  ( 5 m )
Wheel Base 13.0 ft  ( 4 m )
Wheelbase 13.0 ft  ( 4 m )
DRIVE SYSTEM
Drive Config 4x2
Dump
Dump Angle 1,800.0
Load Capacity - heaped 41.0 cu yd  ( 31 cu m )
Load Capacity - Struck 30.5 cu yd  ( 23 cu m )
Lower Time 14.7 seconds
Raise Time 8.1 seconds
Rated Payload 100,000.0 lbs  ( 45,359 kg )
Engine
Aspiration Turbocharged
Bore 5.7 in  ( 14 cm )
Displacement 1,105.0 cu in  ( 18,108 cu cm )
Engine Model Cat C18 ACERT
Gross Power 598.0 hp  ( 446 kw )
Gross Power - SAE J1995 598.0 hp  ( 446 kw )
Make Cat
Max Torque 1,988.0 lbs ft  ( 2,695 nm )
Model C16 ACERT
Net Power 535.0 hp  ( 399 kw )
Net Power - 80/1269/EEC 535.0 hp  ( 399 kw )
Net Power - ISO 9249 535.0 hp  ( 399 kw )
Net Power - SAE J1349 535.0 hp  ( 399 kw )
Number of Cylinders 6.0
Peak Torque 1,988.0 lbs ft  ( 2,695 nm )
Power Measured @ 1,800.0 rpm
Stroke 7.2 in  ( 18 cm )
Torque Measured @ Turbocharged rpm
Torque Rise 12.5
Final Drives
Planetary Ratio 4.80:1
Total Reduction Ratio 13.15:1
Operating Specifications
Alternator Supplied Amperage Gear
Body Capacity - SAE 2:1 41.0 cu yd  ( 31 cu m )
Brake/Hoist System Fluid Capacity 73.0 gal  ( 276 l )
Cooling System Fluid Capacity 30.0 gal  ( 114 l )
Diff and Final Drive Fluid Capacity 42.0 gal  ( 159 l )
Engine Oil Capacity 14.0 gal  ( 53 l )
Fuel Capacity 140.0 gal  ( 530 l )
Maximum Capacity 100,000.0 lbs  ( 45,359 kg )
Nominal Payload Capacity 22.0 lbs  ( 10 kg )
Nominal Payload Class (100%) 102,000.0 lbs  ( 46,266 kg )
Not to Exceed Payload (120%)* 122,000.0 lbs  ( 55,338 kg )
Steering System Fluid Capacity 15.0 gal  ( 57 l )
Tire Size 21.00R33(E4)
Top Speed - Loaded 49.5 mph  ( 80 kph )
Service Refill Capacities
Brake / Hoist / Fan Hydraulic Tank 35.0 gal  ( 132 l )
Brake/Hoist Hydraulic Tank 100,000.0 gal  ( 378,500 l )
Cooling System 30.0 gal  ( 114 l )
Crankcase 16.0 gal  ( 61 l )
Fuel Tank 140.0 gal  ( 530 l )
Steering System - Including Tank 15.0 gal  ( 57 l )
Steering Tank 9.0 gal  ( 34 l )
Torque Converter - Transmission Sump 55,171.0 gal  ( 208,822 l )
Steering System
Steer Angle 36.0 deg
Steering Standards ISO 5010:1992
Turning Circle - Clearance Diameter ISO 3450: 1996 ft
Suspension
Effective Cylinder Stroke - Rear 5.9 in  ( 15 cm )
Tires
Standard Tire 21.00R33 (E4)
Standard Tires 216.0
Transmission
Forward - 1 8.0 mph  ( 13 kph )
Forward - 2 11.0 mph  ( 18 kph )
Forward - 3 14.9 mph  ( 24 kph )
Forward - 4 20.0 mph  ( 32 kph )
Forward - 5 27.1 mph  ( 44 kph )
Forward - 6 36.5 mph  ( 59 kph )
Forward - 7 49.5 mph  ( 80 kph )
Max Speed 49.5 mph  ( 80 kph )
Number of Gears - Forward 7.0
Number of Gears - Reverse 1.0
Reverse 10.5 mph  ( 17 kph )
Weights
Body Weight 22,984.0 lbs  ( 10,425 kg )
Chassis Weight 55,171.0 lbs  ( 25,025 kg )
Empty Weight 78,155.0 lbs  ( 35,451 kg )
Front Axle - Empty 48%
Front Axle - Loaded 34%
Loaded Weight 181,000.0 lbs  ( 82,100 kg )
Operating Weight - Loaded ISO 5010:1992 lbs
Rear Axle - Empty 52%
Rear Axle - Loaded 66%
Weight Distribution Front - empty 48%
Weight Distribution Front - loaded 34%
Weight Distribution Rear - empty 52%
Weight Distribution Rear - loaded 66%

Dealer Contact Info:

Finning CAT

Fax: 780-930-4801



Contact: Kelly Kittson

Click for Phone Number


veritread button





\\ \\ \\