Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $439,000.00 USD
Apply for FinancingHours: | 16327 |
Serial Number: | RLB00356 |
Machine Location: | EDMONTON, AB |
More Information: | https://catused.com/cu/10097770 |
Supplied by HeavyEquipmentData.com →
Approximate Weights - Dual Slope | |
Gross Weight - Empty | 112,000.0 lbs ( 50,802 kg ) |
Approximate Weights - Flat Floor | |
Chassis | 35.0 lbs ( 16 kg ) |
Articulating/Rigid | |
Articulating/Rigid | Rigid |
Body Hoists | |
Body Lower Time - Float | 12.5 seconds |
Body Power Down - High Idle | 12.5 seconds |
Body Raise Time - High Idle | 9.5 seconds |
Pump Flow - High Idle | 136.0 gpm ( 515 lpm ) |
Relief Valve Setting - Raise | 2,500.0 psi |
Brakes | |
Brake Surface - Rear | 7,794.0 cu in ( 127,721 cu cm ) |
Standards | 2.74:1 |
Capacity - Flat Floor - 100% Fill Factor | |
Heaped 2:1 (SAE) | 41.0 cu yd ( 31 cu m ) |
Dimensions | |
Centerline Front Tire Width | 10.4 ft ( 3 m ) |
Dump Ground Clearance | 1.9 ft ( 1 m ) |
Dump Height | 27.5 ft ( 8 m ) |
Front Canopy Height | 13.9 ft ( 4 m ) |
Ground Clearance | 2.4 ft ( 1 m ) |
Inside Body Depth - Maximum | 5.6 ft ( 2 m ) |
Inside Body Length | 18.3 ft ( 6 m ) |
Loading Height - Empty | 11.5 ft ( 4 m ) |
Operating Width | 15.6 ft ( 5 m ) |
Overall Canopy Width | 500.0 ft ( 152 m ) |
Overall Height | 14.0 ft ( 4 m ) |
Overall Height - Body Raised | 27.5 ft ( 8 m ) |
Overall Length | 28.7 ft ( 9 m ) |
Overall Width | 15.7 ft ( 5 m ) |
Wheel Base | 13.0 ft ( 4 m ) |
Wheelbase | 13.0 ft ( 4 m ) |
DRIVE SYSTEM | |
Drive Config | 4x2 |
Dump | |
Dump Angle | 1,800.0 |
Load Capacity - heaped | 41.0 cu yd ( 31 cu m ) |
Load Capacity - Struck | 30.5 cu yd ( 23 cu m ) |
Lower Time | 14.7 seconds |
Raise Time | 8.1 seconds |
Rated Payload | 100,000.0 lbs ( 45,359 kg ) |
Engine | |
Aspiration | Turbocharged |
Bore | 5.7 in ( 14 cm ) |
Displacement | 1,105.0 cu in ( 18,108 cu cm ) |
Engine Model | Cat C18 ACERT |
Gross Power | 598.0 hp ( 446 kw ) |
Gross Power - SAE J1995 | 598.0 hp ( 446 kw ) |
Make | Cat |
Max Torque | 1,988.0 lbs ft ( 2,695 nm ) |
Model | C16 ACERT |
Net Power | 535.0 hp ( 399 kw ) |
Net Power - 80/1269/EEC | 535.0 hp ( 399 kw ) |
Net Power - ISO 9249 | 535.0 hp ( 399 kw ) |
Net Power - SAE J1349 | 535.0 hp ( 399 kw ) |
Number of Cylinders | 6.0 |
Peak Torque | 1,988.0 lbs ft ( 2,695 nm ) |
Power Measured @ | 1,800.0 rpm |
Stroke | 7.2 in ( 18 cm ) |
Torque Measured @ | Turbocharged rpm |
Torque Rise | 12.5 |
Final Drives | |
Planetary Ratio | 4.80:1 |
Total Reduction Ratio | 13.15:1 |
Operating Specifications | |
Alternator Supplied Amperage | Gear |
Body Capacity - SAE 2:1 | 41.0 cu yd ( 31 cu m ) |
Brake/Hoist System Fluid Capacity | 73.0 gal ( 276 l ) |
Cooling System Fluid Capacity | 30.0 gal ( 114 l ) |
Diff and Final Drive Fluid Capacity | 42.0 gal ( 159 l ) |
Engine Oil Capacity | 14.0 gal ( 53 l ) |
Fuel Capacity | 140.0 gal ( 530 l ) |
Maximum Capacity | 100,000.0 lbs ( 45,359 kg ) |
Nominal Payload Capacity | 22.0 lbs ( 10 kg ) |
Nominal Payload Class (100%) | 102,000.0 lbs ( 46,266 kg ) |
Not to Exceed Payload (120%)* | 122,000.0 lbs ( 55,338 kg ) |
Steering System Fluid Capacity | 15.0 gal ( 57 l ) |
Tire Size | 21.00R33(E4) |
Top Speed - Loaded | 49.5 mph ( 80 kph ) |
Service Refill Capacities | |
Brake / Hoist / Fan Hydraulic Tank | 35.0 gal ( 132 l ) |
Brake/Hoist Hydraulic Tank | 100,000.0 gal ( 378,500 l ) |
Cooling System | 30.0 gal ( 114 l ) |
Crankcase | 16.0 gal ( 61 l ) |
Fuel Tank | 140.0 gal ( 530 l ) |
Steering System - Including Tank | 15.0 gal ( 57 l ) |
Steering Tank | 9.0 gal ( 34 l ) |
Torque Converter - Transmission Sump | 55,171.0 gal ( 208,822 l ) |
Steering System | |
Steer Angle | 36.0 deg |
Steering Standards | ISO 5010:1992 |
Turning Circle - Clearance Diameter | ISO 3450: 1996 ft |
Suspension | |
Effective Cylinder Stroke - Rear | 5.9 in ( 15 cm ) |
Tires | |
Standard Tire | 21.00R33 (E4) |
Standard Tires | 216.0 |
Transmission | |
Forward - 1 | 8.0 mph ( 13 kph ) |
Forward - 2 | 11.0 mph ( 18 kph ) |
Forward - 3 | 14.9 mph ( 24 kph ) |
Forward - 4 | 20.0 mph ( 32 kph ) |
Forward - 5 | 27.1 mph ( 44 kph ) |
Forward - 6 | 36.5 mph ( 59 kph ) |
Forward - 7 | 49.5 mph ( 80 kph ) |
Max Speed | 49.5 mph ( 80 kph ) |
Number of Gears - Forward | 7.0 |
Number of Gears - Reverse | 1.0 |
Reverse | 10.5 mph ( 17 kph ) |
Weights | |
Body Weight | 22,984.0 lbs ( 10,425 kg ) |
Chassis Weight | 55,171.0 lbs ( 25,025 kg ) |
Empty Weight | 78,155.0 lbs ( 35,451 kg ) |
Front Axle - Empty | 48% |
Front Axle - Loaded | 34% |
Loaded Weight | 181,000.0 lbs ( 82,100 kg ) |
Operating Weight - Loaded | ISO 5010:1992 lbs |
Rear Axle - Empty | 52% |
Rear Axle - Loaded | 66% |
Weight Distribution Front - empty | 48% |
Weight Distribution Front - loaded | 34% |
Weight Distribution Rear - empty | 52% |
Weight Distribution Rear - loaded | 66% |