Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Auction Pricing
Serial Number: | CAT0216BKRLL03512 |
Machine Location: | TORONTO, ON |
Supplied by HeavyEquipmentData.com →
Cab | |
FOPS | SAE J1043 SEPT87 ISO 3449:1992 Level I |
FOPS Level II | SAE J231 JAN81 ISO 3449:1992 Level II |
ROPS | SAE J1040 MAY94 ISO 3471:1994 |
Dimensions | |
Bucket Pin Height - Carry Position | 9.3 in ( 24 cm ) |
Bucket Pin Height - Maximum Lift | 9.4 ft ( 3 m ) |
Bumper Overhang - Rear Axle | 38.0 in ( 97 cm ) |
Clearance at Max Lift and Dump | 7.1 ft ( 2 m ) |
Clearance at Maximum Lift and Dump | 85.0 in ( 216 cm ) |
Departure Angle | 26 deg |
Ground Clearance | 8.0 in ( 20 cm ) |
Height - Top of Cab | 6.5 ft ( 2 m ) |
Length - With Bucket on Ground | 127.0 in ( 323 cm ) |
Length - Without Bucket | 99.0 in ( 251 cm ) |
Length w/o Bucket | 8.3 ft ( 3 m ) |
Length with Bucket | 10.6 ft ( 3 m ) |
Maximum Dump Angle | 40 deg |
Maximum Overall Height | 146.0 in ( 371 cm ) |
Maximum Reach - With Arms Parallel | 50.4 in ( 128 cm ) |
Rack Back Angle - Maximum Height | 96.7 deg |
Reach - Maximum Lift/Dump | 20.0 in ( 51 cm ) |
Reach at Max Lift and Dump | 20.0 in ( 51 cm ) |
Turn Radius from Center - Bucket | 76.4 in ( 194 cm ) |
Turn Radius from Center - Coupler | 47.2 in ( 120 cm ) |
Turn Radius from Center - Rear | 58.5 in ( 149 cm ) |
Turning Radius from Center - inc bucket | 76.4 in ( 194 cm ) |
Turning Radius from Center - machine rear | 58.5 in ( 149 cm ) |
Vehicle Width over Tires | 60.0 in ( 152 cm ) |
Wheel Base | 3.3 ft ( 1 m ) |
Wheelbase | 3.3 ft ( 1 m ) |
Width Over Tires | 5.0 ft ( 2 m ) |
Engine | |
Bore | 3.3 in ( 8 cm ) |
Displacement | 134.0 cu in ( 2,196 cu cm ) |
Engine Make | Caterpillar |
Engine Model | Cat C2.2 |
Gross Power - SAE J1995 | 51.0 hp ( 38 kw ) |
Net Flywheel Power | 47.0 hp ( 35 kw ) |
Net Power - SAE 1349 | 47.0 hp ( 35 kw ) |
Stroke | 3.9 in ( 10 cm ) |
Hydraulic System | |
Hydraulic Flow | Standard |
Hydraulic Power | 30.4 hp ( 23 kw ) |
Loader Hydraulic Flow | 15.6 gpm ( 59 lpm ) |
Loader Hydraulic Pressure | 3,335.0 psi |
Pump Flow Capacity | 15.6 gpm ( 59 lpm ) |
Relief Valve Pressure | 3,335.0 psi |
Loader | |
Breakout Force | 4,083.0 psi |
Operating Load Rating | 1,400.0 lbs ( 635 kg ) |
Tipping Angle | 2800 deg |
Operating Specifications | |
Breakout Force - Tilt Cylinder | 4,083.0 lbs ( 1,852 kg ) |
Chain Box Fluid Capacity - each side | 1.6 gal ( 6 l ) |
Cooling System Fluid Capacity | 2.6 gal ( 10 l ) |
Engine Oil Fluid Capacity | 2.6 gal ( 10 l ) |
Fuel Capacity | 15.4 gal ( 58 l ) |
Hydraulic System Fluid Capacity | 14.5 gal ( 55 l ) |
Max Speed | 7.0 mph ( 11 kph ) |
Operational Weight | 5,609.0 lbs ( 2,544 kg ) |
Rated Operating Capacity | 1,400.0 lbs ( 635 kg ) |
Rated Operating Capacity with Optional Counterweight | 1,500.0 lbs ( 680 kg ) |
Tipping Load | 2,800.0 lbs ( 1,270 kg ) |
Power Train | |
Travel Speed Forward | 7.0 mph ( 11 kph ) |
Travel Speed Reverse | 7.0 mph ( 11 kph ) |
Service Refill Capacities | |
Chain Box - Each Side | 1.6 gal ( 6 l ) |
Cooling System | 2.6 gal ( 10 l ) |
Engine Crankcase | 2.6 gal ( 10 l ) |
Fuel Tank | 15.4 gal ( 58 l ) |
Hydraulic System | 14.5 gal ( 55 l ) |
Hydraulic Tank | 9.2 gal ( 35 l ) |
Weights | |
Operating Weight | 5,609.0 lbs ( 2,544 kg ) |