Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Auction Pricing
Auction Info: Starting on 2024-12-17
Serial Number: | CAT0242BABXM03475 |
Machine Location: | BROOKLYN, MS |
More Information: | https://www.jeffmartinauctioneers.com/auctions/986/lot/234542-2006-CATERPILLAR-242B-SKID-STEER-SN%3A-CAT0242BABXM03475 |
Supplied by HeavyEquipmentData.com →
Cab | |
FOPS | SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
FOPS Level II | SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional) |
ROPS | SAE J1040 MAY94 and ISO3471:1994 |
Dimensions | |
Bucket Pin Height - Carry Position | 12.0 in ( 30 cm ) |
Bucket Pin Height - Maximum Lift | 10.0 ft ( 3 m ) |
Bumper Overhang - Rear Axle | 39.0 in ( 99 cm ) |
Clearance at Max Lift and Dump | 7.5 ft ( 2 m ) |
Clearance at Maximum Lift and Dump | 88.0 in ( 224 cm ) |
Ground Clearance | 7.0 in ( 18 cm ) |
Length - With Bucket on Ground | 135.0 in ( 343 cm ) |
Length - Without Bucket | 109.0 in ( 277 cm ) |
Length w/o Bucket | 9.1 ft ( 3 m ) |
Length with Bucket | 11.3 ft ( 3 m ) |
Maximum Overall Height | 155.0 in ( 394 cm ) |
Maximum Reach - With Arms Parallel | 48.4 in ( 123 cm ) |
Reach - Maximum Lift/Dump | 30.0 in ( 76 cm ) |
Reach at Max Lift and Dump | 30.2 in ( 77 cm ) |
Turn Radius from Center - Bucket | 87.4 in ( 222 cm ) |
Turn Radius from Center - Coupler | 56.5 in ( 144 cm ) |
Turn Radius from Center - Rear | 60.8 in ( 154 cm ) |
Turning Radius from Center - inc bucket | 87.5 in ( 222 cm ) |
Turning Radius from Center - machine rear | 60.9 in ( 155 cm ) |
Vehicle Width over Tires | 66.0 in ( 168 cm ) |
Wheel Base | 3.6 ft ( 1 m ) |
Wheelbase | 3.6 ft ( 1 m ) |
Width Over Tires | 5.5 ft ( 2 m ) |
Engine | |
Aspiration | turbocharged |
Bore | 3.3 in ( 8 cm ) |
Engine Make | Caterpillar |
Engine Model | Cat 3024C T |
Engine Power - ISO 14396 | 61.0 hp ( 45 kw ) |
Gross Power | 57.7 hp ( 43 kw ) |
Gross Power - SAE J1995 | 62.0 hp ( 46 kw ) |
Net Flywheel Power | 57.0 hp ( 43 kw ) |
Net Power - EEC 80/1269 | 57.0 hp ( 43 kw ) |
Net Power - ISO 9249 EEC | 57.0 hp ( 43 kw ) |
Net Power - SAE 1349 | 57.0 hp ( 43 kw ) |
Stroke | 3.9 in ( 10 cm ) |
Hydraulic System | |
Hydraulic Flow (1) | Standard flow |
Hydraulic Flow (2) | High Flow |
Loader Hydraulic Flow | 15.6 gpm ( 59 lpm ) |
Loader Hydraulic Pressure | 3,335.0 psi |
Maximum Loader Hydraulic Flow | 26.0 gpm ( 98 lpm ) |
Pump Flow Capacity | 15.9 gpm ( 60 lpm ) |
Relief Valve Pressure | 3,335.9 psi |
Loader | |
Breakout Force | 4,058.8 psi |
Operating Load Rating | 1,999.6 lbs ( 907 kg ) |
Tipping Angle | 3,999.2 deg |
Operating Specifications | |
Alternator Supplied Amperage | 85.0 amps |
Breakout Force - Lift Cylinder | 3,841.0 lbs ( 1,742 kg ) |
Breakout Force - Tilt Cylinder | 4,059.0 lbs ( 1,841 kg ) |
Chain Box Fluid Capacity - each side | 1.6 gal ( 6 l ) |
Cooling System Fluid Capacity | 2.7 gal ( 10 l ) |
Engine Oil Fluid Capacity | 2.2 gal ( 8 l ) |
Fuel Capacity | 17.2 gal ( 65 l ) |
Hydraulic System Fluid Capacity | 14.6 gal ( 55 l ) |
Max Speed | 7.5 mph ( 12 kph ) |
Operating Voltage | 12.0 volts |
Operational Weight | 6,801.3 lbs ( 3,085 kg ) |
Rated Operating Capacity | 2,000.0 lbs ( 907 kg ) |
Rated Operating Capacity with Optional Counterweight | 2,047.0 lbs ( 929 kg ) |
Tipping Load | 4,000.0 lbs ( 1,814 kg ) |
Tire Size | 12x16.5 10PR |
Power Train | |
Travel Speed Forward | 7.4 mph ( 12 kph ) |
Travel Speed Reverse | 7.4 mph ( 12 kph ) |
Service Refill Capacities | |
Chain Box - Each Side | 1.6 gal ( 6 l ) |
Cooling System | 2.6 gal ( 10 l ) |
Engine Crankcase | 2.1 gal ( 8 l ) |
Fuel Tank | 17.0 gal ( 64 l ) |
Hydraulic System | 14.5 gal ( 55 l ) |
Hydraulic Tank | 9.2 gal ( 35 l ) |
Weights | |
Operating Weight | 6,802.0 lbs ( 3,085 kg ) |