Equipment ↠ Caterpillar ↠ Skid Steer Loaders ↠ THIS 2016 Caterpillar 262D

2016 Caterpillar 262D

Name: 2016 Caterpillar 262D
Brand: Caterpillar
Availability: OutOfStock

❮

❯

MACHINE SOLD

Marshall Machinery, Inc.

Marshall Machinery, Inc. Dealer Info

Marshall Machinery, Inc. Website

Click here to email Marshall Machinery, Inc..

Contact: Sales Department

Click for Phone Number

Machine Info:

Serial Number:	CAT0262DHDTB05926
Stock Number:	M16560
Machine Location:	HONESDALE, PA

Description:

2016 Caterpillar 262D Skid Steer; 1150 Hours; S/N: CAT0262DHDTB05926; EROPS; Hyd Coupler; 14 Pin Harness; Good Tires; W/ Bucket; Located At 3207 Route 6, Middletown, NY 10940

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.
Cab
FOPS	ISO 3449:2005 Level I
FOPS Level II	ISO 3449:2005 Level II
ROPS	ISO 3471:2008
Dimensions
Bucket Pin Height - Carry Position	7.9 in ( 20 cm )
Bucket Pin Height - Maximum Lift	10.5 ft ( 3 m )
Bucket Pin Reach - Maximum Lift	15.5 in ( 39 cm )
Bumper Overhang - Rear Axle	42.6 in ( 108 cm )
Clearance at Max Lift and Dump	7.9 ft ( 2 m )
Clearance at Maximum Lift and Dump	93.7 in ( 238 cm )
Departure Angle	26.0 deg
Ground Clearance	8.9 in ( 23 cm )
Height - Top of Cab	7.0 ft ( 2 m )
Hinge pin height - fully raised	124.9 in ( 317 cm )
Length - With Bucket on Ground	146.2 in ( 371 cm )
Length - Without Bucket	117.9 in ( 299 cm )
Length w/o Bucket	9.9 ft ( 3 m )
Length with Bucket	12.2 ft ( 4 m )
Maximum Dump Angle	51.0 deg
Maximum Overall Height	157.8 in ( 401 cm )
Maximum Reach - With Arms Parallel	50.9 in ( 129 cm )
Rack Back Angle - Maximum Height	84.0 deg
Reach - Maximum Lift/Dump	30.9 in ( 78 cm )
Reach at Max Lift and Dump	31.0 in ( 79 cm )
Turn Radius from Center - Bucket	85.9 in ( 218 cm )
Turn Radius from Center - Coupler	55.2 in ( 140 cm )
Turn Radius from Center - Rear	71.1 in ( 181 cm )
Turning Radius from Center - inc bucket	85.9 in ( 218 cm )
Turning Radius from Center - machine rear	71.1 in ( 181 cm )
Vehicle Width over Tires	66.0 in ( 168 cm )
Wheel Base	4.1 ft ( 1 m )
Wheelbase	4.1 ft ( 1 m )
Engine
Bore	3.7 in ( 9 cm )
Displacement	203.0 cu in ( 3,327 cu cm )
Engine Model	Cat C3.3B DIT (Turbo)
Gross Power - SAE J1995	74.3 hp ( 55 kw )
Max Torque	195.5 lbs ft ( 265 nm )
Net Flywheel Power	72.9 hp ( 54 kw )
Net Power - ISO 9249 EEC	73.7 hp ( 55 kw )
Net Power - SAE 1349	72.9 hp ( 54 kw )
Stroke	4.7 in ( 12 cm )
Torque Measured @	1,500.0 rpm
General Specifications
Category	Skid Steer Loaders
category	SKID STEERS
ENGINE POWER HP (KW)	73 (54)
MODEL	262D
OPERATING LOAD LBS. (KG)	2,700 (1,225)
OPERATING WIDTH IN. (CM)	66 (168)
RATED OPERATING CAPACITY LBS. (KG) (50%)	2,700 (1,225)
Hydraulic System
Hydraulic Flow (1)	Standard
Hydraulic Flow (2)	High Flow XPS
Pump Flow Capacity	32.0 gpm ( 121 lpm )
Loader
Operating Load Rating	2,700.0 lbs ( 1,225 kg )
Operating Width	66.0 in ( 168 cm )
Operating Specifications
Alternator Supplied Amperage	80.0 amps
Breakout Force - Tilt Cylinder	7,355.0 lbs ( 3,336 kg )
Chain Box Fluid Capacity - each side	3.4 gal ( 13 l )
Cooling System Fluid Capacity	3.7 gal ( 14 l )
Fuel Capacity	24.9 gal ( 94 l )
Hydraulic System Fluid Capacity	13.8 gal ( 52 l )
Max Speed	7.7 mph ( 12 kph )
Operating Voltage	12.0 volts
Operational Weight	8,011.6 lbs ( 3,634 kg )
Rated Operating Capacity	2,700.0 lbs ( 1,225 kg )
Rated Operating Capacity with Optional Counterweight	2,950.0 lbs ( 1,338 kg )
Tipping Load	5,400.0 lbs ( 2,449 kg )
Tire Size	12 Ã— 16.5
Power Train
Travel Speed Forward	7.7 mph ( 12 kph )
Travel Speed Forward - 2-Speed Option	11.0 mph ( 18 kph )
Travel Speed Reverse	7.7 mph ( 12 kph )
Travel Speed Reverse - 2-Speed Option	11.0 mph ( 18 kph )
Service Refill Capacities
Chain Box - Each Side	3.3 gal ( 12 l )
Cooling System	3.7 gal ( 14 l )
Engine Crankcase	3.0 gal ( 11 l )
Fuel Tank	24.8 gal ( 94 l )
Hydraulic System	13.7 gal ( 52 l )
Hydraulic Tank	10.3 gal ( 39 l )
Weights
Operating Weight	8,011.0 lbs ( 3,634 kg )

Dealer Contact Info:

Marshall Machinery, Inc.

Marshall Machinery, Inc. Dealer Info

Marshall Machinery, Inc. Website

Click here to email Marshall Machinery, Inc..

Fax: 570-729-8455

Contact: Sales Department

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon