Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Auction Pricing
Serial Number: | CAT0262DVDTB04285 |
Machine Location: | COLUMBUS, OH |
Supplied by HeavyEquipmentData.com →
Air Conditioning System | |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. |
Cab | |
FOPS | ISO 3449:2005 Level I |
FOPS Level II | ISO 3449:2005 Level II |
ROPS | ISO 3471:2008 |
Dimensions | |
Bucket Pin Height - Carry Position | 7.9 in ( 20 cm ) |
Bucket Pin Height - Maximum Lift | 10.5 ft ( 3 m ) |
Bucket Pin Reach - Maximum Lift | 15.5 in ( 39 cm ) |
Bumper Overhang - Rear Axle | 42.6 in ( 108 cm ) |
Clearance at Max Lift and Dump | 7.9 ft ( 2 m ) |
Clearance at Maximum Lift and Dump | 93.7 in ( 238 cm ) |
Departure Angle | 26.0 deg |
Ground Clearance | 8.9 in ( 23 cm ) |
Height - Top of Cab | 7.0 ft ( 2 m ) |
Hinge pin height - fully raised | 124.9 in ( 317 cm ) |
Length - With Bucket on Ground | 146.2 in ( 371 cm ) |
Length - Without Bucket | 117.9 in ( 299 cm ) |
Length w/o Bucket | 9.9 ft ( 3 m ) |
Length with Bucket | 12.2 ft ( 4 m ) |
Maximum Dump Angle | 51.0 deg |
Maximum Overall Height | 157.8 in ( 401 cm ) |
Maximum Reach - With Arms Parallel | 50.9 in ( 129 cm ) |
Rack Back Angle - Maximum Height | 84.0 deg |
Reach - Maximum Lift/Dump | 30.9 in ( 78 cm ) |
Reach at Max Lift and Dump | 31.0 in ( 79 cm ) |
Turn Radius from Center - Bucket | 85.9 in ( 218 cm ) |
Turn Radius from Center - Coupler | 55.2 in ( 140 cm ) |
Turn Radius from Center - Rear | 71.1 in ( 181 cm ) |
Turning Radius from Center - inc bucket | 85.9 in ( 218 cm ) |
Turning Radius from Center - machine rear | 71.1 in ( 181 cm ) |
Vehicle Width over Tires | 66.0 in ( 168 cm ) |
Wheel Base | 4.1 ft ( 1 m ) |
Wheelbase | 4.1 ft ( 1 m ) |
Engine | |
Bore | 3.7 in ( 9 cm ) |
Displacement | 203.0 cu in ( 3,327 cu cm ) |
Engine Model | Cat C3.3B DIT (Turbo) |
Gross Power - SAE J1995 | 74.3 hp ( 55 kw ) |
Max Torque | 195.5 lbs ft ( 265 nm ) |
Net Flywheel Power | 72.9 hp ( 54 kw ) |
Net Power - ISO 9249 EEC | 73.7 hp ( 55 kw ) |
Net Power - SAE 1349 | 72.9 hp ( 54 kw ) |
Stroke | 4.7 in ( 12 cm ) |
Torque Measured @ | 1,500.0 rpm |
General Specifications | |
Category | Skid Steer Loaders |
category | SKID STEERS |
ENGINE POWER HP (KW) | 73 (54) |
MODEL | 262D |
OPERATING LOAD LBS. (KG) | 2,700 (1,225) |
OPERATING WIDTH IN. (CM) | 66 (168) |
RATED OPERATING CAPACITY LBS. (KG) (50%) | 2,700 (1,225) |
Hydraulic System | |
Hydraulic Flow (1) | Standard |
Hydraulic Flow (2) | High Flow XPS |
Pump Flow Capacity | 32.0 gpm ( 121 lpm ) |
Loader | |
Operating Load Rating | 2,700.0 lbs ( 1,225 kg ) |
Operating Width | 66.0 in ( 168 cm ) |
Operating Specifications | |
Alternator Supplied Amperage | 80.0 amps |
Breakout Force - Tilt Cylinder | 7,355.0 lbs ( 3,336 kg ) |
Chain Box Fluid Capacity - each side | 3.4 gal ( 13 l ) |
Cooling System Fluid Capacity | 3.7 gal ( 14 l ) |
Fuel Capacity | 24.9 gal ( 94 l ) |
Hydraulic System Fluid Capacity | 13.8 gal ( 52 l ) |
Max Speed | 7.7 mph ( 12 kph ) |
Operating Voltage | 12.0 volts |
Operational Weight | 8,011.6 lbs ( 3,634 kg ) |
Rated Operating Capacity | 2,700.0 lbs ( 1,225 kg ) |
Rated Operating Capacity with Optional Counterweight | 2,950.0 lbs ( 1,338 kg ) |
Tipping Load | 5,400.0 lbs ( 2,449 kg ) |
Tire Size | 12 × 16.5 |
Power Train | |
Travel Speed Forward | 7.7 mph ( 12 kph ) |
Travel Speed Forward - 2-Speed Option | 11.0 mph ( 18 kph ) |
Travel Speed Reverse | 7.7 mph ( 12 kph ) |
Travel Speed Reverse - 2-Speed Option | 11.0 mph ( 18 kph ) |
Service Refill Capacities | |
Chain Box - Each Side | 3.3 gal ( 12 l ) |
Cooling System | 3.7 gal ( 14 l ) |
Engine Crankcase | 3.0 gal ( 11 l ) |
Fuel Tank | 24.8 gal ( 94 l ) |
Hydraulic System | 13.7 gal ( 52 l ) |
Hydraulic Tank | 10.3 gal ( 39 l ) |
Weights | |
Operating Weight | 8,011.0 lbs ( 3,634 kg ) |