Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $26,500.00 USD
Apply for FinancingHours: | 4678 |
Serial Number: | B5W01109 |
Machine Location: | PISCATAWAY, NJ |
More Information: | https://catused.com/cu/10119530 |
Supplied by HeavyEquipmentData.com →
Cab | |
FOPS | SAE J1043 SEPT87 ISO 3449:1992 Level I |
FOPS Level II | SAE J231 JAN81 ISO 3449:1992 Level II |
ROPS | SAE J1040 MAY94 ISO 3471:1994 |
Dimensions | |
Bucket Pin Height - Carry Position | 7.9 in ( 20 cm ) |
Bucket Pin Height - Maximum Lift | 10.6 ft ( 3 m ) |
Bucket Pin Reach - Maximum Lift | 16.1 in ( 41 cm ) |
Bumper Overhang - Rear Axle | 42.7 in ( 108 cm ) |
Clearance at Max Lift and Dump | 8.0 ft ( 2 m ) |
Clearance at Maximum Lift and Dump | 95.2 in ( 242 cm ) |
Departure Angle | 25.0 deg |
Ground Clearance | 8.9 in ( 23 cm ) |
Height - Top of Cab | 7.0 ft ( 2 m ) |
Hinge pin height - fully raised | 126.7 in ( 322 cm ) |
Length - With Bucket on Ground | 151.6 in ( 385 cm ) |
Length - Without Bucket | 123.6 in ( 314 cm ) |
Length w/o Bucket | 10.3 ft ( 3 m ) |
Length with Bucket | 12.7 ft ( 4 m ) |
Maximum Dump Angle | 52.0 deg |
Maximum Overall Height | 159.4 in ( 405 cm ) |
Maximum Reach - With Arms Parallel | 50.7 in ( 129 cm ) |
Rack Back Angle - Maximum Height | 83.0 deg |
Reach - Maximum Lift/Dump | 30.9 in ( 78 cm ) |
Reach at Max Lift and Dump | 31.0 in ( 79 cm ) |
Turn Radius from Center - Bucket | 91.5 in ( 232 cm ) |
Turn Radius from Center - Coupler | 58.9 in ( 150 cm ) |
Turn Radius from Center - Rear | 73.8 in ( 187 cm ) |
Turning Radius from Center - machine rear | 73.8 in ( 187 cm ) |
Vehicle Width over Tires | 76.0 in ( 193 cm ) |
Wheel Base | 4.6 ft ( 1 m ) |
Wheelbase | 4.6 ft ( 1 m ) |
Width Over Tires | 6.4 ft ( 2 m ) |
Engine | |
Bore | 3.9 in ( 10 cm ) |
Displacement | 232.0 cu in ( 3,802 cu cm ) |
Engine Model | Cat C3.8 (turbocharged) |
Gross Power - SAE J1995 | 98.0 hp ( 73 kw ) |
Net Flywheel Power | 95.0 hp ( 71 kw ) |
Net Power - ISO 9249 EEC | 95.0 hp ( 71 kw ) |
Net Power - SAE 1349 | 95.0 hp ( 71 kw ) |
Stroke | 4.7 in ( 12 cm ) |
Hydraulic System | |
Hydraulic Flow (1) | Standard |
Hydraulic Flow (2) | High Flow XPS |
Loader Hydraulic Flow | 23.0 gpm ( 87 lpm ) |
Loader Hydraulic Pressure | 3,335.0 psi |
Maximum Loader Hydraulic Flow | 32.0 gpm ( 121 lpm ) |
Maximum Loader Hydraulic Pressure | 4,061.0 psi |
Loader | |
Operating Load Rating | 3,200.0 lbs ( 1,452 kg ) |
Operating Width | 72.0 in ( 183 cm ) |
Tipping load (ISO 14397) | 6,400.1 lbs ( 2,903 kg ) |
Operating Specifications | |
Alternator Supplied Amperage | 100.0 amps |
Breakout Force - Lift Cylinder | 6,100.0 lbs ( 2,767 kg ) |
Breakout Force - Tilt Cylinder | 7,405.0 lbs ( 3,359 kg ) |
Chain Box Fluid Capacity - each side | 2.3 gal ( 9 l ) |
Cooling System Fluid Capacity | 3.7 gal ( 14 l ) |
Engine Oil Fluid Capacity | 2.7 gal ( 10 l ) |
Fuel Capacity | 31.0 gal ( 117 l ) |
Hydraulic System Fluid Capacity | 16.2 gal ( 61 l ) |
Max Speed | 6.6 mph ( 11 kph ) |
Operating Voltage | 12.0 volts |
Operational Weight | 18,527.7 lbs ( 8,404 kg ) |
Rated Operating Capacity | 3,200.0 lbs ( 1,452 kg ) |
Rated Operating Capacity with Optional Counterweight | 3,450.0 lbs ( 1,565 kg ) |
Tipping Load | 6,400.0 lbs ( 2,903 kg ) |
Tire Size | 14 x 17.5 |
Power Train | |
Travel Speed Forward | 6.6 mph ( 11 kph ) |
Travel Speed Forward - 2-Speed Option | 9.4 mph ( 15 kph ) |
Travel Speed Reverse | 6.6 mph ( 11 kph ) |
Travel Speed Reverse - 2-Speed Option | 9.4 mph ( 15 kph ) |
Service Refill Capacities | |
Chain Box - Each Side | 2.3 gal ( 9 l ) |
Cooling System | 3.7 gal ( 14 l ) |
Engine Crankcase | 2.6 gal ( 10 l ) |
Fuel Tank | 30.8 gal ( 117 l ) |
Hydraulic System | 16.0 gal ( 61 l ) |
Hydraulic Tank | 10.3 gal ( 39 l ) |
Weights | |
Operating Weight | 8,404.0 lbs ( 3,812 kg ) |