List Your Equipment For Free  /  Seller Login

Caterpillar TL642 For Sale in Casper, WY



For Sale: $194,753.00 USD

Apply for Financing

Machine Info:

Hours:83
Serial Number:T6901165
Machine Location:CASPER, WY
More Information:https://catused.com/cu/10124415

Description:

ALARM, BACK-UP, STANDARD, BELT, SEAT, 3", CAB, ENCLOSED, AC+ HEAT, CARRIAGE, SIDE TILT, 50", CLIMATE PK, STD, SGL BATTERY, COUPLER, HYDRAULIC, IT, ELECTRICAL HARNESS, HYD QC, FENDERS, SINGLE, FORK, PALLET 2.36" X 6" X 60", FRAME, STABILIZER, HEATER, ENGINE BLOCK, 120V, INSTRUCTIONS, ANSI, LANE 3 ORDER, LEVER, MANUAL, FNR/WIPERS/IND, LIGHTS,ROADING, RH, STABILIZER, LOAD CHART, ANSI, STABILIZERS, MANUAL, O&M, ENGLISH, MONITOR, NONE, Online Owner's Manual , PACK, ROLL ON/ROLL OFF, TL, PREPARATION PACK, AM-N, PRODUCT LINK, CELLULAR PL641, RIDE CONTROL, NONE, SENSOR, BOOM ANGLE, STD, STEERING, STANDARD, SUN SCREEN, ROOF, TIRES, 13.00-24, CAT, G2, TL642 NORTH AMERICAN ORDER, WASHER/WIPER, REAR, WINDOW,REAR, EXT RELEASE, ANSI, WORKLIGHTS,LED, A/C COMPATIBLE


From the manufacturer:

Supplied by HeavyEquipmentData.com →

Axles
Manufacturer Dana
Boom Performance
Boom Down 10.0 seconds
Boom Up 13.0 seconds
Drawbar Pull - Basic 18,000.0 lbs  ( 8,165 kg )
Tele In 13.0 seconds
Tele Out 14.0 seconds
Brakes
Features Service Brakes - inboard wet disc brakes on front and rear axles; Parking Brakes- spring-applied hydraulic release on front axle
Parking Brake Spring-applied hydraulic release on front axle
Dimensions
Ground Clearance 16.8 in  ( 43 cm )
Height 7.8 ft  ( 2 m )
Length - Fork Face 18.5 ft  ( 6 m )
Length to Fork Face 18.5 ft  ( 6 m )
Overall Height 7.9 ft  ( 2 m )
Turning Radius - Over Tires 12.0 ft  ( 4 m )
Turning Radius Outside Tires 12.0 ft  ( 4 m )
Wheel Base 10.7 ft  ( 3 m )
Wheelbase 10.7 ft  ( 3 m )
Width Over Tires 8.0 ft  ( 2 m )
Engine
Bore 4.2 in  ( 11 cm )
Displacement 268.5 cu in  ( 4,400 cu cm )
Engine Model Cat C4.4 DITAAC Tier III
Gross Power 99.0 hp  ( 74 kw )
Gross Power - Basic 99.0 hp  ( 74 kw )
Maximum Torque - Standard 302.4 lbs ft  ( 410 nm )
Net Power 94.5 hp  ( 70 kw )
Stroke 5.0 in  ( 13 cm )
General Specifications
Engine C3.6
Gross Power 100.0 hp  ( 75 kw )
Load Capacity 6,500.0 lbs  ( 2,948 kg )
Max Forward Reach 30.0 ft  ( 9 m )
Max Lift Height 42.0 ft  ( 13 m )
Operating Weight 22,002.0 lbs  ( 9,980 kg )
Top Travel Speed 19.0 mph  ( 31 kph )
Instrumentation
Features Volt meter hourmeter engine oil pressure gauge fuel gauge water temperature gauge
Lift System
Max Forward Reach 30.0 ft  ( 9 m )
Max Lift Capacity 6,500.0 lbs  ( 2,948 kg )
Max Lift Height 42.0 ft  ( 13 m )
Max Load at Max Height 6,500.0 lbs  ( 2,948 kg )
Max Load at Max Reach 700.0 lbs  ( 318 kg )
Operating Specifications
Fuel Capacity 38.0 gal  ( 144 l )
Hydraulic System Fluid Capacity 40.0 gal  ( 151 l )
Load at Maximum Height 6,500.0 lbs  ( 2,948 kg )
Load at Maximum Height - No Stabilizers 6,500.0 lbs  ( 2,948 kg )
Load at Maximum Reach 700.0 lbs  ( 318 kg )
Load at Maximum Reach - No Stabilizers 700.0 lbs  ( 318 kg )
Maximum Forward Reach 30.0 ft  ( 9 m )
Maximum Lift Height 42.0 ft  ( 13 m )
Operating Weight 20,240.0 lbs  ( 9,181 kg )
Rated Load Capacity 6,500.0 lbs  ( 2,948 kg )
Tire Size 13.00 x 24 12-PR
Top Travel Speed 20.4 mph  ( 33 kph )
Operator Station
Features Vinyl suspension seat single electronic joystick spacious interior ergonomic cab
Service Refill Capacities
Fuel Tank 38.0 gal  ( 144 l )
Hydraulic System 40.0 gal  ( 151 l )
Hydraulic Tank 40.0 gal  ( 151 l )
Tires
Optional Construction 13.00 x 24 Foam Filled or Rock Lug or Solid
Standard 13.00 x 24 12-PR
Transmission
Max Speed - forward 20.4 mph  ( 33 kph )
Weights
Operating Weight 20,240.0 lbs  ( 9,181 kg )

Dealer Contact Info:

Wyoming Machinery Company

Fax: 307-261-4486

Click for Phone Number


veritread button





39.96118 \\ -82.99879 \\ Columbus \\ OH \\ 43085