Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Auction Pricing
Auction Info: Starting on 2024-11-21 Click here to place a bid Minimum Bid: $10
Supplied by HeavyEquipmentData.com →
Bucket | |
Breakout Force | 13,710.0 lbs ( 6,219 kg ) |
Bucket Capacity - heaped | 0.8 cu yd ( 1 cu m ) |
Dump Clearance at Max Raise | 10.4 ft ( 3 m ) |
Cab | |
FOPS | meets the following criteria: SAE J231 JAN81 ISO 3449:1992 |
ROPS | meets the following criteria: SAE J1040 MAY94 ISO 3471-1:1986 |
Dimensions | |
Height - Top of Cab | 9.1 ft ( 3 m ) |
Hinge Pin - Max Height | 11.1 ft ( 3 m ) |
Length with Bucket on Ground | 17.5 ft ( 5 m ) |
Tread Width | 62.4 in ( 159 cm ) |
Wheelbase | 7.3 ft ( 2 m ) |
Width Over Tires | 6.5 ft ( 2 m ) |
Engine | |
Bore | 3.7 in ( 9 cm ) |
EEC 80/1269 Rating | 80.0 hp ( 60 kw ) |
Gross Power | 84.0 hp ( 63 kw ) |
ISO 9249 Rating | 80.0 hp ( 60 kw ) |
Net Power | 76.0 hp ( 57 kw ) |
SAE J1349 Rating | 80.0 hp ( 60 kw ) |
Stroke | 4.8 in ( 12 cm ) |
General Specifications | |
?Model | 908.0 |
Breakout Force | 11,446.0 lbf |
Bucket Capacity | 2.Jan cu yd |
Bucket Capacity cu. yd. (cu m) | 1.0 - 1.5 (.80 - 1.15) |
Category | Wheel Loaders |
Engine | C2.8 |
Engine Power hp (kw) | 74 (56) |
Engine type | Cat C2.8 |
Full-Turn Tipping Load | 8,895.0 lbs ( 4,035 kg ) |
Net Power | 74.7 hp ( 56 kw ) |
Operating Weight | 14,617.0 lbs ( 6,630 kg ) |
Operating?Weight | 14,617 (6,632) |
Tip Load | 10,604 (4,812) |
Travel Speed (Fwd/Rev) | 25 / 19 mph |
Travel Speed | 25 / 12.5 mph |
Hydraulic System | |
3rd Valve Flow | 21.6 gpm ( 82 lpm ) |
Dump Time | 2.4 seconds |
Lower Time | 3.2 seconds |
Main Relief | 3,400.0 psi |
Pump Flow Capacity | 15.9 gpm ( 60 lpm ) |
Pump Type | Gear |
Raise Time | 4.5 seconds |
Relief Valve Setting | 3,400.0 psi |
Operating Specifications | |
Alternator Supplied Amperage | 90.0 amps |
Articulation | 40.0 deg |
Breakout Force | 13,710.0 lbs ( 6,219 kg ) |
Cooling System Fluid Capacity | 5.8 gal ( 22 l ) |
Dump Height at Full Lift | 10.4 ft ( 3 m ) |
Engine Oil Fluid Capacity | 2.6 gal ( 10 l ) |
Fuel Capacity | 21.0 gal ( 79 l ) |
Full Turn Static Tipping Load - Bucket | 8,270.0 lbs ( 3,751 kg ) |
Full Turn Static Tipping Load - Forks | 6860 lb |
Hydraulic Lift Capacity | 9,900.0 lbs ( 4,491 kg ) |
Hydraulic System Fluid Capacity | 17.0 gal ( 64 l ) |
Operating Voltage | 12.0 volts |
Operating Weight | 13,288.0 lbs ( 6,027 kg ) |
Oscillation +/- | 11.0 deg |
Rack Back - Transport Position | 56.0 deg |
Rated Bucket Capacity | 1.3 cu yd ( 1 cu m ) |
Rated Operating Load at Full Turn - Bucket | 4,136.0 lbs ( 1,876 kg ) |
Rated Operating Load at Full Turn - Forks | 5291 lb |
Reach - Without Teeth | 2.8 ft ( 1 m ) |
Rear Axle Oscillation | 22.0 deg |
Static Tipping Weight | 9,636.0 lbs ( 4,371 kg ) |
Straight Tipping Load - Bucket | 9,636.0 lbs ( 4,371 kg ) |
Tire Size | 12.5-18 |
Transmission Fluid Capacity | 2.6 gal ( 10 l ) |
Power Train, Axles and Brakes | |
Axle and Final Drives | fixed front axle with limited slip differential and planetary ge |
Brake Standards | Brake meets ISO 3450:1996 |
Maximum Travel Speeds - Forward and Reverse, High | 12.0 mph ( 19 kph ) |
Maximum Travel Speeds - With 12.5-18 Tires, Forward and Reverse, Low | 4.0 mph ( 6 kph ) |
Service and Parking Brake | Are combined in a single dry-disc driveline brake |
Transmission Type | Closed-loop two-speed hydrostatic single-path transmission. |
Service Refill Capacities | |
Cooling System | 5.8 gal ( 22 l ) |
Engine Oil | 2.6 gal ( 10 l ) |
Fuel Tank | 21.0 gal ( 79 l ) |
Hydraulic System | 17.0 gal ( 64 l ) |
Transmission | |
Max Speed - Forward | 12.0 mph ( 19 kph ) |
Max Speed - Reverse | 12.0 mph ( 19 kph ) |
Number of Forward Gears | 2.0 |
Number of Reverse Gears | 2.0 |
Transmission Type | Hydrostatic |
Weights | |
Operating Weight | 13,288.0 lbs ( 6,027 kg ) |