Equipment ↠ Caterpillar ↠ Wheel Loaders ↠ THIS Caterpillar 924F

Dismantled Caterpillar 924F For Sale

Name: Caterpillar 924F
Brand: Caterpillar
Availability: InStock

For Sale: Call for Price

Utah Track & Welding Inc.

Utah Track & Welding Inc. Dealer Info

Utah Track & Welding Inc. Website

Click here to email Utah Track & Welding Inc..

Contact: Sam Oman

Click for Phone Number

Machine Info:

Serial Number:	5NN00526
Machine Location:	SALT LAKE CITY, UT

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Axles
Axle Oscillation	12.0 deg
Bucket
Bucket Capacity - heaped	2.3 cu yd ( 2 cu m )
Bucket Capacity - struck	1.9 cu yd ( 1 cu m )
Dump Clearance at Max Raise	8.9 ft ( 3 m )
Dimensions
Bucket Pin Height - Maximum Lift	11.8 ft ( 4 m )
Height - Top of Cab	10.3 ft ( 3 m )
Height - Top of ROPS/FOPS	10.3 ft ( 3 m )
Hinge Pin - Max Height	11.8 ft ( 4 m )
Length with Bucket on Ground	21.5 ft ( 7 m )
Overall Height	10.3 ft ( 3 m )
Rack Back Angle - Carry	45.0 deg
Reach at Max Lift and Dump	2.9 ft ( 1 m )
Wheel Base	8.8 ft ( 3 m )
Wheelbase	8.9 ft ( 3 m )
Width - Over Tires	7.7 ft ( 2 m )
Width Over Tires	7.7 ft ( 2 m )
Engine
Aspiration	Turbocharged
Displacement	268.0 cu in ( 4,392 cu cm )
Engine Model	3,114.0
Gross Power	111.0 hp ( 83 kw )
Net Power	105.0 hp ( 78 kw )
Number of Cylinders	4.0
Power Measured @	2,400.0 rpm
Rated Net Power	105.0 hp ( 78 kw )
Hydraulic System
Dump Time	1.3 seconds
Lower Time	2.7 seconds
Pump Flow Capacity	34.9 gpm ( 132 lpm )
Raise Time	4.3 seconds
Relief Valve Setting	3,600.0 psi
Loader Hydraulic System
Dump	1.3 seconds
Lower, Empty, Float Down	2.7 seconds
Pump Flow - Implement Pump	35.0 gpm ( 132 lpm )
Raise	4.3 seconds
Total	8.3 seconds
Operating Specifications
Articulation Angle	40.0 deg
Breakout Force	21,067.0 lbs ( 9,556 kg )
Cooling System Fluid Capacity	9.3 gal ( 35 l )
Dump Clearance at Full Lift and 45 degrees Dump Angle	8.8 ft ( 3 m )
Engine Oil Fluid Capacity	2.7 gal ( 10 l )
Front Axle/Diff Fluid Capacity	5.6 gal ( 21 l )
Fuel Capacity	41.5 gal ( 157 l )
Hydraulic System Fluid Capacity	20.4 gal ( 77 l )
Operating Weight	19,896.8 lbs ( 9,025 kg )
Reach - Full Lift and 45 degrees Dump	2.8 ft ( 1 m )
Rear Axle Oscillation	24.0 deg
Rear Axle/Diff Fluid Capacity	5.6 gal ( 21 l )
Static Tipping Load - Full Turn	13,885.0 lbs ( 6,298 kg )
Static Tipping Weight	15,879.9 lbs ( 7,203 kg )
Tire Size	17.5-25
Transmission Fluid Capacity	6.1 gal ( 23 l )
Service Refill Capacities
Cooling System	9.3 gal ( 35 l )
Crankcase	2.7 gal ( 10 l )
Front	5.6 gal ( 21 l )
Fuel Tank	41.5 gal ( 157 l )
Hydraulic Tank	14.0 gal ( 53 l )
Rear	5.6 gal ( 21 l )
Transmission	6.1 gal ( 23 l )
Steering System
Minimum Turning Radius - Over Tires	201.0 in ( 511 cm )
Steering Articulation	40.0 deg
Tires
Size	17.5-25
Tread Width	6.1 ft ( 2 m )
Transmission
2 Forward	8.2 mph ( 13 kph )
3 Forward	14.7 mph ( 24 kph )
4 Forward	23.8 mph ( 38 kph )
Forward - 1	4.5 mph ( 7 kph )
Max Speed - Forward	23.9 mph ( 38 kph )
Max Speed - Reverse	14.8 mph ( 24 kph )
Number of Forward Gears	4.0
Number of Reverse Gears	3.0
Reverse - 1	4.5 mph ( 7 kph )
Transmission Type	Powershift
Weights
Operating Weight	20,081.0 lbs ( 9,109 kg )

Dealer Contact Info:

Utah Track & Welding Inc.

Utah Track & Welding Inc. Dealer Info

Utah Track & Welding Inc. Website

Click here to email Utah Track & Welding Inc..

Contact: Sam Oman

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon