Equipment ↠ Caterpillar ↠ Wheel Loaders ↠ THIS 2001 Caterpillar 924G

2001 Caterpillar 924G For Sale in South Mills, NC

Name: 2001 Caterpillar 924G
Brand: Caterpillar
Price: 29500 USD
Availability: InStock

❮

❯

For Sale: $29,500.00 USD

Apply for Financing

Southeastern Equipment Corporation (North Carolina)

Southeastern Equipment Corporation (North Carolina) Dealer Info

Southeastern Equipment Corporation (North Carolina) Website

Click here to email Southeastern Equipment Corporation (North Carolina).

Contact: Davis Mellott

Click for Phone Number

Machine Info:

Serial Number:	CEG-9SW01034
Stock Number:	CEG-13-8791
Machine Location:	SOUTH MILLS, NC

Description:

Enclosed cab with heat , hydraulic quick coupler with bucket and forks, auxiliary plumbing, Single lever joystick control for hydraulic functions. 50% tires all the way around. The pre-emission (no def) diesel engine starts easily and burns clean exhaust. The powershift transmission shifts properly and pull through all gears in forward and reverse directions, Tight center and steering, good brakes. Good running older loader with a lot of useful life remaining

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Axles
Axle Oscillation	12 deg
Bucket
Bucket Capacities	2 - 3 cu yd ( 2 cu m )
Bucket Capacity - struck	2.0 cu yd ( 2 cu m )
Bucket Width	8.4 ft ( 3 m )
Cab
FOPS	SAE J231 JAN81 ISO 3449-1992 Level II
ROPS	SAE J1040 MAY94 ISO 3471-1994
Dimensions
Bucket Pin Height - Maximum Lift	12.1 ft ( 4 m )
Carry Height	1.2 ft ( 0 m )
Centerline of Front Axle to Hitch	4.7 ft ( 1 m )
Digging Depth	4.0 in ( 10 cm )
Dump Angle at Maximum Lift	45 deg
Dump Clearance at Maximum Lift - 45 degrees	9.1 ft ( 3 m )
Fork Tine Length	4.0 ft ( 1 m )
Height - Center of Axle	2.1 ft ( 1 m )
Height - Top of Hood	85.2 in ( 216 cm )
Height - Top of ROPS/FOPS	10.5 ft ( 3 m )
Hinge Pin - Max Height	12.4 ft ( 4 m )
Length - Rear Axle to Bumper	6.4 ft ( 2 m )
Length w/ Bucket on Ground	23.6 ft ( 7 m )
Length with out Forks on Ground	25.0 ft ( 8 m )
Length with Bucket on Ground	23.1 ft ( 7 m )
Overall Height	15.7 ft ( 5 m )
Overall Height - Bucket Raised	15.7 ft ( 5 m )
Overall Length	23.1 ft ( 7 m )
Rack Back Angle - Carry	48 deg
Rack Back Angle - Maximum Lift	58 deg
Reach at Maximum Lift and 45 degrees Dump	2.1 ft ( 1 m )
Wheel Base	9.2 ft ( 3 m )
Wheel Base Length	9.2 ft ( 3 m )
Wheelbase	9.2 ft ( 3 m )
Width - Over Tires	7.9 ft ( 2 m )
Width Over Tires	7.8 ft ( 2 m )
Engine
Bore	4.0 in ( 10 cm )
Power Measured @	2,300.0 rpm
Rated Net Power	129.0 hp ( 96 kw )
Stroke	5.0 in ( 13 cm )
Hydraulic System
Relief Valve Setting	3,756.5 psi
Loader Hydraulic System
Bore (1)	4.3 in ( 11 cm )
Bore (2)	4.8 in ( 12 cm )
Dump	1.1 seconds
Lower, Empty, Float Down	2.7 seconds
Pump Flow - Implement Pump	40.2 gpm ( 152 lpm )
Raise	5.2 seconds
Stroke (1)	29.7 in ( 75 cm )
Stroke (2)	20.5 in ( 52 cm )
Total	9.0 seconds
Operating Specifications
Alternator Supplied Amperage	80 amps
Articulation Angle	40 deg
Breakout Force	21,727.0 lbs ( 9,855 kg )
Cooling System Fluid Capacity	10.6 gal ( 40 l )
Dump Clearance at Full Lift and 45 degrees Dump Angle	9.1 ft ( 3 m )
Engine Oil Capacity	5.3 gal ( 20 l )
Engine Oil Fluid Capacity	5.3 gal ( 20 l )
Front Axle/Diff Fluid Capacity	5.6 gal ( 21 l )
Front Diff Fluid Capacity	5.6 gal ( 21 l )
Operating Voltage	24.0 volts
Reach - Full Lift and 45 degrees Dump	2.1 ft ( 1 m )
Rear Axle Oscillation	12 deg
Rear Axle/Diff Fluid Capacity	5.6 gal ( 21 l )
Rear Diff Fluid Capacity	5.6 gal ( 21 l )
Static Tipping Load - Full Turn	15,163.0 lbs ( 6,878 kg )
Static Tipping Weight	17,359.2 lbs ( 7,874 kg )
Transmission Fluid Capacity	6.1 gal ( 23 l )
Turning Radius	16.7 ft ( 5 m )
Service Refill Capacities
Cooling System	10.9 gal ( 41 l )
Crankcase	4.2 gal ( 16 l )
Front	5.5 gal ( 21 l )
Fuel Tank	59.4 gal ( 225 l )
Hydraulic Tank	18.5 gal ( 70 l )
Rear	5.5 gal ( 21 l )
Transmission	6.1 gal ( 23 l )
Steering System
Maximum Working Pressure	3,000.0 psi
Minimum Turning Radius - Over Tires	200.0 in ( 508 cm )
Steering Angle - Each Direction	40 deg
Steering Cylinder, Two, Bore	2.8 in ( 7 cm )
Tires
Size	17.5-25PR (L-2)
Tread Width	6.2 ft ( 2 m )
Transmission
Max Speed - Reverse	13.5 mph ( 22 kph )
Number of Forward Gears	4.0
Number of Reverse Gears	3.0
Transmission Type	countershaft
Weights
Operating Weight	23,920.0 lbs ( 10,850 kg )

Dealer Contact Info:

Southeastern Equipment Corporation (North Carolina)

Southeastern Equipment Corporation (North Carolina) Dealer Info

Southeastern Equipment Corporation (North Carolina) Website

Click here to email Southeastern Equipment Corporation (North Carolina).

Contact: Davis Mellott

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon