Equipment ↠ Caterpillar ↠ Wheel Loaders ↠ THIS Caterpillar 938K RQ+

Caterpillar 938K RQ+ For Sale in Novi, MI

Name: Caterpillar 938K RQ+
Brand: Caterpillar
Price: 69900 USD
Availability: InStock

❮

❯

For Sale: $69,900.00 USD

Apply for Financing

Michigan Cat

Michigan Cat Dealer Info

Michigan Cat Website

Click here to email Michigan Cat.

Contact: Nikki Paschall

Click for Phone Number

Machine Info:

Hours:	16426
Serial Number:	SWL00563
Machine Location:	NOVI, MI
More Information:	https://catused.com/cu/10093925

Description:

CAB, AC, BKT, FORKS FOR AN ADD'L $5000, RC, 2V, CONDITION HOURS AND ATTACHMENTS SUBJECT TO CHANGE, Online Owner's Manual

Machine Details:

GENERAL CONDITION
ET Download Available	Yes
Machine Starts and is Operable	Yes
S.O.S. (All Compartments)	No
Tires are Aired Up and Drivable	Yes
VIDS/VIMS Download Available	No
GENERAL APPEARANCE
Cleaning Required	Yes
S.O.S. Taken	No
SAFETY ITEMS
Back Up Alarm Functioning	No
ROPS	Yes
Safety Decals Legible	Yes
GAUGES, OPERATOR STATION, CONSOLE
Back Up Alarm	No
Current O&MM	Yes
ROPS Certification Plate	Yes
Sound Proofing	Yes
ENGINE
Blow By	No
Compression in Radiator	No
Emissions Decal	Yes
Engine Oil Level Full	Yes
Fluid Levels OK?	Yes
Fuel Leaks	No
Knocking	No
Oil Leaks	No
Water in Oil	No
COOLING SYSTEM
Leaks - COOLING SYSTEM 1	No
Oil in Anti-Freeze	No
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block Heater	Yes
Ether Aid	Yes
TRANSMISSION
Ether Aid	Testing area was limited
STEERING
Articulate P & B	Good
Hand Metering Unit	Good
Lines / Fittings - STEERING	Good
Steering Cylinder	Fair
Steering Linkage	Good
Steering Valves / Pumps	Good
Steering Wheel Tilt / Extend	Good
BRAKE
Holds In Park	Yes
AXLE ASSEMBLIES
Front Axle Housing	Good
Rear Axle Housing	Good
Wheel Lugs & Rims - AXLE ASSEMBLIES	Good
HYDRAULICS
Leaks - HYDRAULICS	No
ATTACHMENTS / WORK TOOLS
Forks	Yes
BUCKET
Forks	8’10ft wide - BUCKET ONLY
FINAL DRIVES
Front Axle	Good
Oscillation	Fair
Rear Axle	Good
Trunion	Good
Wheel Lugs & Rims - FINAL DRIVES	Good
TIRES
Forks	20.5-R25

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Bucket
Bucket Capacities	6.5 cu yd ( 5 cu m )
Dump Clearance at Max Raise	9.3 ft ( 3 m )
Cab
FOPS	SAE J/ISO 3449 APR98 Level II ISO 3449 1992 Level II
ROPS	SAE J1040 MAY94 ISO 3471-1994
Dimensions
Bucket Pin Height - Maximum Lift	13.0 ft ( 4 m )
Carry Height	1.5 ft ( 0 m )
Centerline of Front Axle to Hitch	5.0 ft ( 2 m )
Digging Depth	3.9 in ( 10 cm )
Dump Angle at Maximum Lift	49.0 deg
Dump Clearance at Maximum Lift - 45 degrees	9.3 ft ( 3 m )
Height - Center of Axle	2.2 ft ( 1 m )
Height - Top of ROPS/FOPS	10.9 ft ( 3 m )
Length - Rear Axle to Bumper	6.4 ft ( 2 m )
Overall Height - Bucket Raised	17.3 ft ( 5 m )
Overall Length	25.1 ft ( 8 m )
Rack Back Angle - Carry	45.0 deg
Rack Back Angle - Maximum Lift	54.0 deg
Reach at Maximum Lift and 45 degrees Dump	3.8 ft ( 1 m )
Wheel Base	10.0 ft ( 3 m )
Wheel Base Length	10.0 ft ( 3 m )
Engine
Bore	4.0 in ( 10 cm )
Displacement	402.0 cu in ( 6,588 cu cm )
EEC 80/1269	170.0 hp ( 127 kw )
Engine Model	C7.1 ACERT
Gross Power	175.0 hp ( 131 kw )
Model	C6.6 ACERT
Net Power	169.0 hp ( 126 kw )
Net Torque	591.0 lbs ft ( 801 nm )
Number of Cylinders	6.0
Rated Net Power	169.0 hp ( 126 kw )
Stroke	5.0 in ( 13 cm )
Torque Measured @	1,600.0 rpm
Hydraulic System
Dump Time	1.5 seconds
Lower Time	2.7 seconds
Pump Flow Capacity	50.0 gpm ( 189 lpm )
Raise Time	6.2 seconds
Relief Valve Setting	4,061.0 psi
Loader Hydraulic System
Bore (1)	4.7 in ( 12 cm )
Bore (2)	5.9 in ( 15 cm )
Dump	1.5 seconds
Hydraulic Cycle Time	9.7 seconds
Lower, Empty, Float Down	2.7 seconds
Pump Flow - Implement Pump	50.0 gpm ( 189 lpm )
Raise	5.5 seconds
Stroke (1)	31.1 in ( 79 cm )
Stroke (2)	21.9 in ( 56 cm )
Total	9.7 seconds
Operating Specifications
Articulation Angle	40.0 deg
Cooling System Fluid Capacity	8.5 gal ( 32 l )
Dump Clearance at Full Lift and 45 degrees Dump Angle	9.3 ft ( 3 m )
Front Axle/Diff Fluid Capacity	9.2 gal ( 35 l )
Fuel Capacity	51.5 gal ( 195 l )
Hydraulic System Fluid Capacity	23.8 gal ( 90 l )
Operating Weight	34,129.0 lbs ( 15,481 kg )